lirc-remotes-users Mailing List for lirc-remotes

Hello,

I have created a config for the Edifier RC10G remote, which controls the Edifier R1700BT (Version 2017) Bookshelf Speakers.

The directory containing the remote config and picture is attached (edifier-rc10g.tar). I also attached my completed checklist (edifier-rc10g-checklist.txt), which shows all my verification work according to your documentation.

Could you please send me a confirmation once this config is added to the remotes database?

Thank you very much.

Regards,
goodsoftworx

Sorry I sent without relizing some of my mistakes I ment Roku not Hulu. I
found a bunch of codes for the Roku channels

On Fri, Oct 18, 2024 at 4:59 PM Jeff Sadowski <jef...@gm...>
wrote:

> I got some ir code files from a program called IrScrutinizer
> I found it buggy but really useful for creating usable files to send ir
> commands to my devices.
>
> What I really liked was it was using a format Protocol,D,S,F not sure
> what each of them stood for
> The first 3 fields Protocol, D and S on most remotes was the same or
> nearly the same
> Making it easy to try other ir signals to see if I could find more
> functionality.
> I have a whole range of channels now for the hulu ir codes
> I copied the first 3 fields and tried 1-255 in the last to get a bunch of
> them
> Not knowing what they would be I just tried them all and labeled them as I
> figured them out.
>
> I found on my Denon Receiver that it created a raw file. I tried
> irrceord to convert it and irrecord gave no errors however when I tried the
> converted file the  codes no longer worked as they did with the raw file.
> Maybe there was an error that irrecord made?
>
> I would like to help by offering my lirc files but not sure the proper way
> to do so. I am also working on a web page interface for lirc that will be
> easily customisable.
> The ones I found are very difficult to setup I'm tring to make one that a
> user can point and click to setup with minimal effort.
> I use netcat with bash to send ircodes via irsend and with list commands I
> gather all the remotes and ircodes irsend understands
>

I got some ir code files from a program called IrScrutinizer
I found it buggy but really useful for creating usable files to send ir
commands to my devices.

What I really liked was it was using a format Protocol,D,S,F not sure
what each of them stood for
The first 3 fields Protocol, D and S on most remotes was the same or nearly
the same
Making it easy to try other ir signals to see if I could find more
functionality.
I have a whole range of channels now for the hulu ir codes
I copied the first 3 fields and tried 1-255 in the last to get a bunch of
them
Not knowing what they would be I just tried them all and labeled them as I
figured them out.

I found on my Denon Receiver that it created a raw file. I tried
irrceord to convert it and irrecord gave no errors however when I tried the
converted file the  codes no longer worked as they did with the raw file.
Maybe there was an error that irrecord made?

I would like to help by offering my lirc files but not sure the proper way
to do so. I am also working on a web page interface for lirc that will be
easily customisable.
The ones I found are very difficult to setup I'm tring to make one that a
user can point and click to setup with minimal effort.
I use netcat with bash to send ircodes via irsend and with list commands I
gather all the remotes and ircodes irsend understands

created pull request here
https://sourceforge.net/p/lirc-remotes/code/merge-requests/9/

Files are attached for user group review
-- 
Lee

Dear all,

please find attached the config and photo for my TV remote. 'irrecord' 
wouldn't work for me, so I created the config manually.

Unfortunately, some buttons are a bit worn off (in particular PLAY and 
PAUSE in the bottom row) -- I should really have taken the photo when 
the remote was new ...

Best regards,
Thomas Betker

-------- Forwarded Message --------
Subject: LG_6710CMAM09D
Date: Thu, 8 Feb 2018 12:12:06 +0100
From: Beat Besmer <bea...@gm...>
To: li...@ba...

Thanks for LIRC. Such a great piece of software.

Regards from Zurich, Beat

-------- Forwarded Message --------
Subject: 	Configuration for RC-1173
Date: 	Fri, 23 Feb 2018 22:10:07 +0000
From: 	Daniel Tarleton <dan...@ho...>
To: 	li...@ba... <li...@ba...>



Hi there,

 

Please find attached a configuration for the Denon RC-1173 remote.

 

Kind regards,

Dan

 

-------- Forwarded Message --------
Subject: 	RC Cambridge Audio SR-20
Date: 	Mon, 26 Feb 2018 10:49:28 +0000
From: 	Cosmin Diaconu <bcd...@gm...>
Reply-To: 	Cosmin Diaconu <bcd...@gm...>
To: 	li...@ba...



Hello,

I have attached generated file for Cambridge Audio SR-20 remote control
with irrecord. 

There are both old type and new type. The new type is modified manually
by me from old type one. I have verified all keys of the new type with irw.

You can also find attached a photo of remote.

Thank you for your work with lirc.

Best regards,
Cosmin

Hi

I have a Philips WAC3500 streamium music player, but I have lost the 
remote control. Does anyone have the codes needed to setup a lirc 
configuration file as I have a remote using a Raspberry Pi.

Thanks

David

-------- Forwarded Message --------
Subject: 	Re: to send LIRC files for you
Date: 	Fri, 09 Jun 2017 18:25:25 -0300
From: 	jo...@jo...
To: 	Alec Leamas <lea...@gm...>



Hello, My Friend !!

My LIRC files for Brazilian Devices are in:

http://www.joao.eng.br/remotes

Google Tradutor

Use at will (freely) and add to the code bank (remotecodes)...

Thanks,

João

A 2017-06-01 05:28, Alec Leamas escreveu:

>
>
> On 30/05/17 22:07, jo...@jo... <mailto:jo...@jo...> wrote:
>> Good Afternon !
>>
>> I have any files *.lirc of remote control, and I  want sendo it´s for you.
>>
>> But I don´t know how send.
>>
>> Help-me, please.
>
> Just send them to me in an email :)
>
> Before you do that, I enclose the standard reply I'm sending when I 
> receive such an email from a new contributor.
>
> Cheers!
>
> --alec
>
> ---------------------standard reply follows ---------
>
>
>
> Thanks for this contribution, it's most welcome!
>
> We are currently trying to enhance the process for submitting remote
> files in order to make them better. Could you possibly take a look at
> the attached checklist and update the file according to that?
>
> In particular note that KEY_RETURN and KEY_EPG (Electronic Program
> Guide) are available.
>
> Please also note that the the old database [1 
> <http://lirc.org/remotes-table.html>] used by versions prior to
> 0.9.2 is frozen and not updated. The new database is at [2 
> <http://lirc-remotes.sourceforge.net/>].
>
> If you are using 0.9.2+, please check [3 
> <https://sourceforge.net/p/lirc-remotes/wiki/Checklist>] instead of the attachment.
> Here is updated info and references to the new tools available in 0.9.2.
>
> Cheers!
>
> --alec
>
> [1] http://lirc.org/remotes-table.html
> [2] http://lirc-remotes.sourceforge.net/
> [3] https://sourceforge.net/p/lirc-remotes/wiki/Checklist

-------- Forwarded Message --------
Subject: AAXA M5 Remote
Date: Sun, 4 Jun 2017 17:37:51 +1000
From: Marcus Cook <te...@th...>
Organisation: Shogun Lodge Services
To: li...@ba...

AAXA M5 config file attached.

Cheers

Marcus Cook
Shogun Lodge Services
te...@th...
0403 568 526

Tech Solutions for Artists and Their Events

Please Note: When not in the workshop I may not have email access.
Please call if urgent.

As both these "A non-text attachment was scrubbed..." you can
apparently not send the work you made with blood sweat and tears to
this list.

Where's the proper place to we send x.lircd.conf-files and remote
control images?
I had also seen the https://sourceforge.net/p/lirc-remotes/wiki/Checklist/

/ Fredric

* Fairchild Channel F collector extraordinaire *
http://channelf.se - The Gallery of Channel F


2017-03-05 5:02 GMT+01:00  <lir...@li...>:
> Send Lirc-remotes-users mailing list submissions to
>         lir...@li...
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         https://lists.sourceforge.net/lists/listinfo/lirc-remotes-users
> or, via email, send a message with subject or body 'help' to
>         lir...@li...
>
> You can reach the person managing the list at
>         lir...@li...
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Lirc-remotes-users digest..."
>
>
> Today's Topics:
>
>    1. Fwd: JVC RM-RXUT100 config contribution (Alec Leamas)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 5 Mar 2017 05:02:30 +0100
> From: Alec Leamas <lea...@gm...>
> Subject: [Lirc-remotes-users] Fwd: JVC RM-RXUT100 config contribution
> To: lir...@li...
> Message-ID: <405...@gm...>
> Content-Type: text/plain; charset="utf-8"
>
>
>
>
> -------- Forwarded Message --------
> Subject: JVC RM-RXUT100 config contribution
> Date: Fri, 3 Mar 2017 23:08:06 +0000
> From: Duncan Gibb <dun...@gm...>
> To: li...@ba...
>
> Hi
>
> Attached is my lircd.conf for JVC RM-RXUT100 remote and a small JPEG of it.
>
> I have tried to keep to the standards described at
> https://sourceforge.net/p/lirc-remotes/wiki/Checklist/
>
> This remote is very similar to several JVC devices for which configs
> already exist, and in particular to the RM-RXUT200R.  However, at
> least for my use-cases, my config is more reliable; I think it is also
> more correct, in that 1 and 0 are the way round the official JVC spec
> describes, although the timing is faster.
>
> I hope this is useful.  If you would prefer it as a pull/merge request
> on SourceForge, let me know.
>
> Cheers
>
>
> Duncan
>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: jvc_rm-rxut100.lircd.conf
> Type: application/octet-stream
> Size: 4195 bytes
> Desc: not available
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: jvc_rm-rxut100.lircd.jpg
> Type: image/jpeg
> Size: 87981 bytes
> Desc: not available
>
> ------------------------------
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>
> ------------------------------
>
> _______________________________________________
> Lirc-remotes-users mailing list
> Lir...@li...
> https://lists.sourceforge.net/lists/listinfo/lirc-remotes-users
>
>
> End of Lirc-remotes-users Digest, Vol 23, Issue 1
> *************************************************

-------- Forwarded Message --------
Subject: JVC RM-RXUT100 config contribution
Date: Fri, 3 Mar 2017 23:08:06 +0000
From: Duncan Gibb <dun...@gm...>
To: li...@ba...

Hi

Attached is my lircd.conf for JVC RM-RXUT100 remote and a small JPEG of it.

I have tried to keep to the standards described at
https://sourceforge.net/p/lirc-remotes/wiki/Checklist/

This remote is very similar to several JVC devices for which configs
already exist, and in particular to the RM-RXUT200R.  However, at
least for my use-cases, my config is more reliable; I think it is also
more correct, in that 1 and 0 are the way round the official JVC spec
describes, although the timing is faster.

I hope this is useful.  If you would prefer it as a pull/merge request
on SourceForge, let me know.

Cheers


Duncan

I've got this box from Swedish Bredbandsbolaget (firmware
4.6.1.telenor.33_161206_1056). They only have the RF version of the remote
but IR works as well (36kHz). Logitech remotes have it in the list and it
works.
I got some codes from an old preprogrammed multi remote, but it was missing
some important keys like "OK". I read it out with an audio in connected IR
detector with a 3V button cell built from plans found on lirc  pages,  then
built a transmitter for the COM-port. I got some life but had to build the
most complicated version fed with USB voltage to make it work reasonably.
Still a disappointment, not at all like any cheap remote. Tuning the
frequency didn't help much either.
Sat for hours 1,5m from the Arris box with the laptop in my knee and tried
every logical combination of codes that could be derived from the other
codes. I got a reaction on some codes but nothing with functionality except
a few ones that were doubles.

I bought an IR remote from a competitor (Telia), they use the same box.
It worked pretty well, it's missing EPG, three buttons had changed places
compared to titles (info, text, menu), the REC button doesn't work nor the
CH+ and CH- nor TV/Text but I do get LED  flash on the box for all these
non working ones.
I swapped the button caps on "menu"  and "info" , then rewired the traces
between "info" and "text" and got a much correct working controller apart
from REC and CH-buttons. I could now add missing codes to my programmable
controller: OK, play/pause, rew, ffw, mute, the four color buttons and
power. So I've got an almost complete set apart from the EPG and REC - for
€9. EPG can be reached from menu though.
The RF remote has two types of exit-buttons, one that says exit and one
that's a bent arrow - they work the same as far as I can tell. There's a
search button but the search function is usually mapped to  the yellow
button anyway. It also has buttons for their play-service and film-service
but these are also mapped on color buttons and can be reached through the
menu. The last two missing buttons are the skip forward and backwards
buttons, the jump 5min in a recording so you kan skip commercials - the
time can be changed in "settings" 1,2,5 or 10min.

Question is if someone has the Logitech multi and can share codes for my
missing buttons or perhaps the black Arris IR remote that looks the same as
the RF version?
Then I could use lirc to program my multi.

I'd love an Android app of lirc where you could take a photo of your remote
and then map functions to where you touch the remote image. Swipe up and
down if remote is zoomed in, swipe left or right to swap controller. IR
interface with battery cell hooked to the audio. I know there are similar
apps, haven't seen one with these functions (yet).

I'll read out my current button set and compare it to the database... See
if there's the same codes and spend some more hours with the laptop.

Best Swedish Regards, Fredric.

Hi,

 

i converted and added codes for the Logitech Z906 Soundsystem, found by
Zibri….

http://www.hifi-remote.com/forums/viewtopic.php?t=14120

 

Herzliche Grüße

 

Markus

 

 

Mark Watney: 

At some point, everything's gonna go south on you... everything's going to
go south and you're going to say, this is it. 

This is how I end. Now you can either accept that, or you can get to work. 

That's all it is. You just begin. You do the math. You solve one problem...
and you solve the next one... and then the next. 

And If you solve enough problems, you get to come home. All right,
questions?

 

 

-------- Forwarded Message --------
Subject: LIRC config file for Philips MCi-500h
Date: Thu, 16 Feb 2017 20:03:51 +0100
From: Phyks <ph...@ph...>
To: li...@ba...

Hi,

I've just came across Lirc which is a really wonderful tool, thanks a
lot for it! I could not find my own remote (picture attached as well as
the config file) in the available remotes, so I tried to create a file.
Here it is, in case it can be merged upstream.

My remote is for a Philips MCi-500h jukebox.

I experienced some troubles while creating the config file (and this is
the very first such config file I create):

* I had to create some new labels for keys that I could not find in the
pre-existing Lirc namespaces. Not sure if this is the right way to do :/
Such keys are : MP3CD, HD, MARK, VIEW, SMARTEQ, RDS, SAME_GENRE,
SAME_ARTIST, MUSIC_BROADCAST, MUSIC_FOLLOWS_ME, UNDERSCORE,
INTERROGATION_MARK, EXCLAMATION_MARK, AROBASE, DASH, COLON.

* I am not sure about the right way to handle short vs long press.
Typically, some of the features are available only with long presses on
buttons (labels above the button). I registered them the same way for
now. Also, the alphabetic keyboard is actually a T9 keyboard (and KEY_A,
is rather a KEY_ABC), but I did not know how to handle it nicely in Lirc.

* I was not sure about KEY_PREVIOUS/KEY_NEXT vs
KEY_PREVIOUSSONG/KEY_NEXTSONG, I used the first ones.


Please, feel free to let me know about any mistake I may have made, I
will fix it if you want to merge it in the available remotes database.

Thanks!
-- 
Phyks

-------- Forwarded Message --------
Subject: 	LIRC conf file
Date: 	Fri, 17 Feb 2017 12:54:13 +0100
From: 	Alexander Feuster <ale...@gm...>
To: 	li...@ba...



Hello!

Here is a LIRC conf file which isn´t available on the LIRC config page. 
Please add it to the other conf´s.

Best regards

Alexander Feuster

conf info:

# contributed by
#  Alexander Feuster (ale...@gm... 
<mailto:ale...@gm...>)
# brand:
#  TechniSat
# model no. of remote control:
#  FBDVR401, FBDVR451 and other compatible TechniSat remotes beginning 
from 2011
#  older remotes are supported for the most basic key functions
# devices being controlled by this remote:
#  TVs, Satellite-Receivers and other STBs

-------- Forwarded Message --------
Subject: attached data lircd.conf Alcor DTV HS+
Date: Fri, 17 Feb 2017 17:26:39 +0100
From: moli <li...@mo...>
To: li...@ba...

Hello,

# Please make this file available to others by sending it to
<li...@ba...> # this config file was automatically generated using
lirc-0.9.1-git(default) on Wed Feb 15 18:41:18 2017 # contributed by 
moli # brand: remote control packaged to Alcor DTV HS+
# model no. of remote control: n/a (no model number whatsoever)
# devices being controlled by this remote: Raspberry Pi 1B 512MB

begin remote
   name  lircd.conf
   bits           16
   flags SPACE_ENC|CONST_LENGTH
   eps            30
   aeps          100
   header       8989  4414
   one           615  1619
   zero          615   500
   ptrail        615
   repeat       8993  2175
   pre_data_bits   16
   pre_data       0x40BD
   gap          107378
   toggle_bit_mask 0x0
   begin codes
KEY_NUMERIC_1 0x00FF
KEY_NUMERIC_2 0x807F
KEY_NUMERIC_3 0x40BF
KEY_NUMERIC_4 0xC03F
KEY_NUMERIC_5 0x20DF
KEY_NUMERIC_6 0xA05F
KEY_NUMERIC_7 0x609F
KEY_NUMERIC_8 0xE01F
KEY_NUMERIC_9 0x10EF
KEY_NUMERIC_0 0x906F
KEY_UP 0x48B7
KEY_DOWN 0xC837
KEY_LEFT 0x8877
KEY_RIGHT 0x08F7
KEY_OK 0xA857
KEY_EXIT 0x38C7
KEY_PLAYPAUSE 0xF00F
KEY_STOP 0x6897
KEY_MUTE 0x50AF
KEY_VOLUMEDOWN 0x708F
KEY_VOLUMEUP 0xF807
KEY_CHANNELDOWN 0x58A7
KEY_CHANNELUP 0x18E7
KEY_ZOOM 0xD02F
## button named POWER
KEY_MEDIA 0xA25D
## button named RECORD
KEY_CONTEXT_MENU 0x9867
## button named SNAPSHOT
KEY_INFO 0xE817
## button named SHUFFLE
KEY_MENU 0x22DD
   end codes
end remote

-------- Forwarded Message --------
Subject: Samsung  AA59-00637A
Date: Sun, 19 Feb 2017 16:28:18 -0800
From: Chris Smolen <iam...@gm...>
To: li...@ba...

-------- Forwarded Message --------
Subject: 	config file for philips 49PUS6401
Date: 	Sat, 14 Jan 2017 17:40:10 +0000
From: 	Simon Hawker <Sim...@ho...>
To: 	li...@ba... <li...@ba...>



I've attached the config file. Thanks for the help.

-------- Forwarded Message --------
Subject: Kathrein remote for UFS-923
Date: Sat, 09 May 2015 18:55:23 +0200
From: Dr. Werner Fink <wer...@ar...>
To: li...@ba...


# Please make this file available to others
# by sending it to <li...@ba...>
#
# this config file was automatically generated
# using lirc-0.9.0(default) on Sat May  9 17:50:30 2015
#
# contributed by #
# brand:                       Kathrein
# model no. of remote control: RCU-676 ???
# devices being controlled by this remote: UFS-923
#

begin remote

   name  /tmp/kathrein.conf
   bits            8
   flags RC6|CONST_LENGTH
   eps            30
   aeps          100

   header       2726   852
   one           468   422
   zero          468   422
   pre_data_bits   29
   pre_data       0x37FB97F
   gap          106436
   toggle_bit_mask 0x8000
   rc6_mask    0x100000000

       begin codes
           KEY_POWER                0xF3
           TV/Radio                 0x7E
           KEY_1                    0xFE
           KEY_2                    0xFD
           KEY_3                    0xFC
           KEY_4                    0xFB
           KEY_5                    0xFA
           KEY_6                    0xF9
           KEY_7                    0xF8
           KEY_8                    0xF7
           KEY_9                    0xF6
           KEY_0                    0xFF
           KEY_MENU                 0xAB
           KEY_TEXT                 0xC3
           KEY_VOLUMEDOWN           0xEE
           KEY_CHANNELUP            0xE1
           KEY_CHANNELDOWN          0xE0
           KEY_VOLUMEUP             0xEF
           KEY_MUTE                 0xF2
           KEY_INFO                 0xF0
           KEY_RED                  0x92
           KEY_GREEN                0x91
           KEY_YELLOW               0x90
           KEY_BLUE                 0x8F
           KEY_EPG                  0x33
           KEY_UP                   0xA7
           KEY_LEFT                 0xA5
           KEY_RIGHT                0xA4
           KEY_DOWN                 0xA6
           KEY_MEDIA                0xB9
           KEY_OK                   0xA3
           KEY_BACK                 0xAA
           portal                   0x2A
           KEY_FASTBACKWARD         0xDE
           KEY_PLAY                 0xC7
           KEY_FASTFORWARD          0xDF
           KEY_PAUSE                0xC6
           KEY_RECORD               0xC8
           KEY_STOP                 0xCE
       end codes

end remote

-------- Forwarded Message --------
Subject: 	REMOTE VXX2702 PIONEER BRAND
Date: 	Wed, 27 Apr 2016 10:06:40 +0200
From: 	Julien A. <juj...@li...>
To: 	li...@ba... <li...@ba...>



You already have one file for this remote but it’s not working (all code 
are the same)

# Please make this file available to others

# by sending it to <li...@ba...>

#

# this config file was automatically generated

# using lirc-0.9.0-pre1(default) on Wed Apr 27 09:44:16 2016

#

# contributed by Juju007007

#

# brand: Pioneer

# model no. of remote control: VXX2702

# devices being controlled by this remote: DVD PLAYER VXX2702

#

begin remote

    name  VXX2702

    bits           32

    flags SPACE_ENC|CONST_LENGTH

    eps            30

    aeps          100

    header       8479  4287

    one           498  1629

    zero          498   565

    ptrail        498

    gap          89762

    toggle_bit_mask 0x0

        begin codes

            KEY_POWER                0xC53A9966 0xF50A3DC2

            KEY_AUDIO                0xC53A9966 0xF50A7D82

            KEY_SUBTITLE             0xC53A9966 0xF50A6C93

            KEY_SETUP                0xC53A9966 0xF50A0DF2

            KEY_MENU                 0xC53A9966 0xF50A9D62

            KEY_AGAIN                0xC53A9966 0xF50A27D8

            KEY_BACK                 0xC53A9966 0xF50A2FD0

            KEY_NEXT                 0xC53A39C6

            KEY_PREVIOUS             0xC53AB946

            KEY_STOP                 0xC53A19E6

            KEY_PLAY                 0xC53A7986

            KEY_PAUSE                0xC53AF906

            KEY_FORWARD              0xC53A59A6

            KEY_REWIND               0xC53AD926

            KEY_1                    0xC53A9966 0xF50A857A

            KEY_2                    0xC53A9966 0xF50A45BA

            KEY_3                    0xC53A9966 0xF50AC53A

            KEY_4                    0xC53A9966 0xF50A25DA

            KEY_5                    0xC53A9966 0xF50AA55A

            KEY_6                    0xC53A9966 0xF50A659A

            KEY_7                    0xC53A9966 0xF50AE51A

            KEY_8                    0xC53A9966 0xF50A15EA

            KEY_9                    0xC53A9966 0xF50A956A

            KEY_CLEAR                0xC53A9966 0xF50AA758

            KEY_0                    0xC53A9966 0xF50A05FA

            KEY_OPEN                 0xC53A9966 0xF50A6D92

            KEY_ENTER                0xC53A9966 0xF50AF708

            KEY_UP                   0xC53A9966 0xF50A4FB0

            KEY_DOWN                 0xC53A9966 0xF50ACF30

            KEY_RIGHT                0xC53A9966 0xF50A26D9

            KEY_LEFT                 0xC53A9966 0xF50AC639

        end codes

end remote

Provenance : Courrier <https://go.microsoft.com/fwlink/?LinkId=550986> 
pour Windows 10

-------- Forwarded Message --------
Subject: 	Frigidaire LIRC Remote Config
Date: 	Mon, 9 May 2016 20:52:23 -0400
From: 	Daniel Burgess <dan...@gm...>
To: 	li...@ba...



Attached is a conf file for the remote of a Frigidaire window ac unit. 
Details are in the conf file. Let me know if there are any questions / 
problems.

Thanks!

-------- Forwarded Message --------
Subject: 	Lircd config file for remote TOSHIBA SE-R0236
Date: 	Mon, 10 Oct 2016 10:13:58 +0300
From: 	Grygorii Musiiaka <gry...@gm...>
To: 	li...@ba...



Please see attached file.

P.S. There are not all buttons but most useful.

-------- Forwarded Message --------
Subject: 	Re: IR remote code for Samsung TM1250
Date: 	Mon, 2 Jan 2017 13:06:18 -0500
From: 	Mihir Patil <zb...@gm...>
To: 	li...@ba...



Sorry, I realized I had put the wrong configuration file... Here is the 
correct one:

On Mon, Jan 2, 2017 at 12:52 PM, Mihir Patil <zb...@gm... 
<mailto:zb...@gm...>> wrote:

     I configured all the buttons that sent IR signals. Here is the
     configuration file.