-1- La présente invention concerne un dispositif de Publicité sur Lieu de Vente émergente, à poser sur les poignées des chariots des grandes et moyennes surfaces pour communiquer auprès des clients. L'affichage traditionnel sur l'avant des chariots étant peu remarqué par les consommateurs, le dispositif permet de faire émerger le message de la marque. Certains outils de publicité sur lieu de vente souffrent d'un manque de visibilité, notamment une fois les chariots pleins (surface de communication recouverte). Le dispositif selon l'invention permet de remédier à cet inconvénient. II est destiné, selon sa première caractéristique à être posé sur la poignée d'un chariot (8) et donc directement à la vue du client qui pousse son chariot. Il est composé d'une face publicitaire carrée (1), d'une languette (2), perforée en deux endroits (3), d'une bande adhésive (4) et d'un système de fixation, composé d'une vis (5+6) et d'un écrou (7). Selon les modes particuliers de réalisation : - Le support est en polypropylène blanc 55p. - La surface de communication (1) est imprimée recto ou recto/verso. Son format, carré, est de 120 mm x 120 mm. L'impression du message publicitaire est quadri et vernis UV [offset UV] recto. - La languette (2) est perforée à respectivement 118 et 15 mm du bas de la PLV (vue de face). Elle entoure la poignée du chariot (8) afin que la PLV soit posée avec un certain angle (13) par rapport à la poignée. Sa largeur est de 30 mm et sa longueur est de 130 mm minimum. Sa longueur est variable. Les emplacements des perforations (3) et la taille de la bande adhésive(4) varient en fonction de la taille de la languette. - Les deux perforations (3) servent à insérer la vis (5+6) et l'écrou (7), pour fixer le dispositif autour de la poignée du chariot (8). Leur diamètre est de 5 mm. - La bande adhésive (4) est une bande adhésive double face. Son format dépend de celui de la languette. Côté languette, la colle fixe la bande adhésive à la languette très solidement et de manière permanente. L'indice d'adhésion de la colle est de 6 N/cm. Cette colle a la particularité d'avoir une bonne adhésion sur les surfaces à faible tension de surface tels que polypropylène et polyéthylène. Côté extérieur, la colle permet une adhésion de la languette à la poignée du chariot (8), afin que la PLV ne tourne pas autour de la poignée. L'indice de colle est de 1 N/cm afin que, lors de la dépose, aucune trace de colle ne reste sur la poignée. La particularité de cette colle est qu'elle offre une très bonne résistante à l'eau et aux températures élevées. 2933222 -2- - Le système de fixation, composé d'une vis (5+6) et d'un écrou (7) maintient le 35 dispositif sur la poignée du chariot. Une fois posé, il est inviolable et reste dans sa position initiale. Le façonnage inclut une découpe à la forme, la pose de la bande adhésive non permanente et le système de fixation. Les dessins annexés illustrent l'invention : 40 La figure 1/6 représente le dispositif de l'invention déplié, face recto ; la figure 2/6, face verso ; la figure 3/6 représente le dispositif plié, face verso. La figure 4/6 représente le dispositif plié vu de profil ; la figure 5/6, le dispositif fixé sur la poignée vue de face, la figure 6/6 le dispositif posé sur la poignée vue de profil. En référence à ces dessins, le dispositif comporte une surface de communication 45 carrée (1) destinée à être imprimée en fonction des demandes des marques. Cette surface est reliée à une languette (2) de longueur variable lui permettant d'être accrochée à la poignée du chariot (8). Lors de la pose sur la poignée, le recto de la surface doit être tourné face au chariot c'est-à-dire face au client qui pousse son chariot.The present invention relates to an advertising device on emerging place of sale, to be placed on the handles of trolleys of large and medium surfaces to communicate with customers. The traditional display on the front of the carts being little noticed by consumers, the device allows to emerge the message of the brand. Some point-of-sale advertising tools suffer from a lack of visibility, especially once the trolleys are full (communication surface covered). The device according to the invention overcomes this disadvantage. It is intended, according to its first feature to be placed on the handle of a carriage (8) and therefore directly in the view of the customer who pushes his cart. It consists of a square advertising surface (1), a tongue (2), perforated in two places (3), an adhesive tape (4) and a fastening system, consisting of a screw (5 + 6) and a nut (7). According to the particular embodiments: - The support is in white polypropylene 55p. - The communication surface (1) is printed recto or recto / verso. Its square format is 120 mm x 120 mm. The printing of the advertising message is quadri and varnish UV [offset UV] recto. - The tongue (2) is perforated respectively at 118 and 15 mm from the bottom of the PLV (front view). It surrounds the handle of the carriage (8) so that the PLV is placed at an angle (13) relative to the handle. Its width is 30 mm and its length is 130 mm minimum. Its length is variable. The locations of the perforations (3) and the size of the adhesive tape (4) vary depending on the size of the tab. - The two perforations (3) serve to insert the screw (5 + 6) and the nut (7), to fix the device around the handle of the carriage (8). Their diameter is 5 mm. - The adhesive tape (4) is a double-sided adhesive tape. Its format depends on that of the tongue. On the tongue side, the glue fixes the adhesive tape to the tongue very firmly and permanently. The adhesion index of the adhesive is 6 N / cm. This glue has the particularity of having good adhesion on low surface tension surfaces such as polypropylene and polyethylene. On the outside, the glue allows adhesion of the tongue to the handle of the carriage (8), so that the PLV does not turn around the handle. The glue index is 1 N / cm so that when removing, no trace of glue remains on the handle. The particularity of this glue is that it offers a very good resistance to water and high temperatures. 2933222 -2- - The fastening system consisting of a screw (5 + 6) and a nut (7) holds the device on the carriage handle. Once laid, it is inviolable and remains in its original position. The shaping includes a cut to the shape, the installation of the non-permanent adhesive tape and the fastening system. The accompanying drawings illustrate the invention: FIG. 1/6 shows the device of the invention unfolded, face-up; Figure 2/6, reverse side; Figure 3/6 shows the folded device, back side. Figure 4/6 shows the folded device seen in profile; Figure 5/6, the device attached to the handle viewed from the front, Figure 6/6 the device placed on the handle viewed in profile. With reference to these drawings, the device comprises a square communication surface 45 (1) intended to be printed according to the demands of the marks. This surface is connected to a tongue (2) of variable length allowing it to be attached to the handle of the carriage (8). When laying on the handle, the front of the surface must be facing the cart that is to say facing the customer who pushes his cart.
50 La languette flexible (2) est destinée à entourer la poignée du chariot (8). Elle est recouverte sur la partie verso d'une bande adhésive collante (4). Elle est perforée à deux endroits (3) afin de pouvoir y insérer le système de fixation (5,6 et 7). La bande adhésive (4), collée sur la languette (2), est collante au verso pour adhérer à la poignée du chariot (8).The flexible tongue (2) is intended to surround the handle of the carriage (8). It is covered on the back side of a sticky adhesive tape (4). It is perforated in two places (3) in order to insert the fixing system (5,6 and 7). The adhesive strip (4), glued on the tongue (2), is sticky on the back to adhere to the handle of the carriage (8).
55 Le système de fixation est composé d'une vis (5 et 6) et d'un écrou (7) en plastique. Pour l'insérer, il faut retirer la bande adhésive (4) de la languette (2). Ainsi le verso de la languette, qui vient se positionner contre la poignée (8), est collant. Ensuite, il faut entourer la poignée du chariot (8) avec la languette (2) et positionner le dispositif de façon à ce que les deux perforations (3) soient face à face. La languette (2) est alors 60 collée autour de la poignée du chariot (8), au niveau du crochet métallique permettant d'accrocher des sacs (11). On insère ensuite la vis (5 et 6) et l'écrou (7). Le dispositif selon l'invention est particulièrement destiné à la publicité sur lieu de vente sur les chariots des grandes et moyennes surfaces.55 The fastening system consists of a screw (5 and 6) and a nut (7) made of plastic. To insert it, remove the adhesive tape (4) from the tongue (2). Thus the back of the tongue, which is positioned against the handle (8), is sticky. Then, it is necessary to surround the handle of the carriage (8) with the tongue (2) and to position the device so that the two perforations (3) are face to face. The tongue (2) is then glued around the handle of the carriage (8), at the metal hook for hanging bags (11). The screw (5 and 6) and the nut (7) are then inserted. The device according to the invention is particularly intended for advertising on point of sale on trolleys of large and medium surfaces.
65 Le dispositif selon la revendication 5 permet de ne gêner en aucune façon l'utilisation habituelle des chariots par les consommateurs, puisque les poignées des chariots (9) sont laissées libres, ainsi que l'emplacement du consigneur (12). The device according to claim 5 makes it possible not to hinder in any way the usual use of the trolleys by consumers, since the handles of the trolleys (9) are left free, as well as the location of the consigner (12).