## Major changes in 2.1

- Devices and folders can now be grouped in the GUI by setting the new
  `group` attribute.

- HTTP and HTTPS proxies with support for CONNECT can now be used, in
  addition to the existing support for SOCKS proxies (the environment
  variable `all_proxy=https://...`).

- Block indexing can be turned off for folders where it's more desirable to
  optimise for reduced database size and overhead than minimal transfer
  size (the `blockIndexing` attribute on folder configuration).

- GUI login session duration can be configured to be longer or shorter than
  the default one week, or set to infinitely long. The cookie path can also
  be adjusted. (The `sessionCookieDurationS` and `sessionCookiePath`
  attributes in the GUI configuration.)

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.1.0` or `ghcr.io/syncthing/syncthing:2.1.0`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(stdiscosrv): close file descriptor on flush error in write by @cuiweixie in #10615
* fix(gui): disable autocomplete for folder password by @bt90 in #10342
* fix(protocol): limit size of incoming request messages by @calmh in #10629
* fix(gui): don't show local device under remote devices (ref #10563) by @maen-bn in #10631
* fix(gui): order folders alphabetically and ensure local device stays hidden (ref #10563, ref #10631) by @maen-bn in #10637
* fix(gui): fallback to folder ID when label is empty in remove dialog by @RealCharlesChia in #10657
* fix(gui): fix tabs visually disabled but still clickable during ignore patterns setup (fixes #10634) by @JRNitre in #10651
* fix(strelaysrv): properly use bind address for outgoing requests (fixes #10658) by @calmh in #10659
* fix(stdiscosrv): only read certificate proxy headers with --http by @calmh in #10674
### Features
* feat(gui, config): support simple folder grouping (fixes #2070) by @maen-bn in #10563
* feat: make http session cookie path & duration configurable by @vvaswani in #10632
* feat(dialer): add HTTP/HTTPS proxy support via CONNECT by @luizluca in #10572
* feat: make block indexing configurable by @calmh in #10608
### Other
* chore: remove tracking inode change time by @calmh in #10579
* build(deps): temporarily switch to fork of gateway discovery library (fixes #10593) by @marbens-arch in #10594
* build: extract github.ref_name expression to env mapping by @dagecko in #10624
* build: pin 20 third-party actions to immutable commit SHAs by @dagecko in #10625
* build: have dependabot group PRs and use cooldown by @calmh in #10630
* chore: trivial fixes by @calmh in #10650
* chore(model): more efficient tracking of renames during scan by @calmh in #10653
* chore(model): deflake cluster config tests by @calmh in #10662
* chore(model): deflake TestCompletionEmptyGlobal by @calmh in #10663
* chore(scanner): deflake TestStopWalk by @calmh in #10664
* build: parallelise linux builds slightly by @calmh in #10666
* chore(api): deflake TestHTTPLogin on Windows by @calmh in #10667
* chore(api): use ldap package escape functions by @calmh in #10672
* build: only run the periodic build jobs in the syncthing org by @calmh in #10675
* build(deps): update dependencies by @calmh in #10683
* chore(model): slightly improve handling of pulling empty blocks by @calmh in #10679
* chore(gui): upgrade jQuery to 3.7.1 to fix CVE-2020-11022, CVE-2020-11023, CVE-2015-9251 by @Umer-Azaz in #10673
* chore(fs): remove unused SymlinksSupported() method by @calmh in #10684

## New Contributors
* @cuiweixie made their first contribution in #10615
* @dagecko made their first contribution in #10624
* @maen-bn made their first contribution in #10563
* @RealCharlesChia made their first contribution in #10657
* @JRNitre made their first contribution in #10651
* @vvaswani made their first contribution in #10632
* @luizluca made their first contribution in #10572
* @Umer-Azaz made their first contribution in #10673

**Full Changelog**: v2.0.16...v2.1.0

## Major changes in 2.1

- Devices and folders can now be grouped in the GUI by setting the new
  `group` attribute.

- HTTP and HTTPS proxies with support for CONNECT can now be used, in
  addition to the existing support for SOCKS proxies (the environment
  variable `all_proxy=https://...`).

- Block indexing can be turned off for folders where it's more desirable to
  optimise for reduced database size and overhead than minimal transfer
  size (the `blockIndexing` attribute on folder configuration).

- GUI login session duration can be configured to be longer or shorter than
  the default one week, or set to infinitely long. The cookie path can also
  be adjusted. (The `sessionCookieDurationS` and `sessionCookiePath`
  attributes in the GUI configuration.)

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.1.0-rc.2` or `ghcr.io/syncthing/syncthing:2.1.0-rc.2`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(stdiscosrv): close file descriptor on flush error in write by @cuiweixie in #10615
* fix(gui): disable autocomplete for folder password by @bt90 in #10342
* fix(protocol): limit size of incoming request messages by @calmh in #10629
* fix(gui): don't show local device under remote devices (ref #10563) by @maen-bn in #10631
* fix(gui): order folders alphabetically and ensure local device stays hidden (ref #10563, ref #10631) by @maen-bn in #10637
* fix(gui): fallback to folder ID when label is empty in remove dialog by @RealCharlesChia in #10657
* fix(gui): fix tabs visually disabled but still clickable during ignore patterns setup (fixes #10634) by @JRNitre in #10651
* fix(strelaysrv): properly use bind address for outgoing requests (fixes #10658) by @calmh in #10659
* fix(stdiscosrv): only read certificate proxy headers with --http by @calmh in #10674
### Features
* feat(gui, config): support simple folder grouping (fixes #2070) by @maen-bn in #10563
* feat: make http session cookie path & duration configurable by @vvaswani in #10632
* feat(dialer): add HTTP/HTTPS proxy support via CONNECT by @luizluca in #10572
* feat: make block indexing configurable by @calmh in #10608
### Other
* chore: remove tracking inode change time by @calmh in #10579
* build(deps): temporarily switch to fork of gateway discovery library (fixes #10593) by @marbens-arch in #10594
* build: extract github.ref_name expression to env mapping by @dagecko in #10624
* build: pin 20 third-party actions to immutable commit SHAs by @dagecko in #10625
* build: have dependabot group PRs and use cooldown by @calmh in #10630
* chore: trivial fixes by @calmh in #10650
* chore(model): more efficient tracking of renames during scan by @calmh in #10653
* chore(model): deflake cluster config tests by @calmh in #10662
* chore(model): deflake TestCompletionEmptyGlobal by @calmh in #10663
* chore(scanner): deflake TestStopWalk by @calmh in #10664
* build: parallelise linux builds slightly by @calmh in #10666
* chore(api): deflake TestHTTPLogin on Windows by @calmh in #10667
* chore(api): use ldap package escape functions by @calmh in #10672
* build: only run the periodic build jobs in the syncthing org by @calmh in #10675
* build(deps): update dependencies by @calmh in #10683
* chore(model): slightly improve handling of pulling empty blocks by @calmh in #10679
* chore(gui): upgrade jQuery to 3.7.1 to fix CVE-2020-11022, CVE-2020-11023, CVE-2015-9251 by @Umer-Azaz in #10673
* chore(fs): remove unused SymlinksSupported() method by @calmh in #10684

## New Contributors
* @cuiweixie made their first contribution in #10615
* @dagecko made their first contribution in #10624
* @maen-bn made their first contribution in #10563
* @RealCharlesChia made their first contribution in #10657
* @JRNitre made their first contribution in #10651
* @vvaswani made their first contribution in #10632
* @luizluca made their first contribution in #10572
* @Umer-Azaz made their first contribution in #10673

**Full Changelog**: v2.0.16...v2.1.0-rc.2

## Major changes in 2.1

- Devices and folders can now be grouped in the GUI by setting the new
  `group` attribute.

- HTTP and HTTPS proxies with support for CONNECT can now be used, in
  addition to the existing support for SOCKS proxies (the environment
  variable `all_proxy=https://...`).

- Block indexing can be turned off for folders where it's more desirable to
  optimise for reduced database size and overhead than minimal transfer
  size (the `blockIndexing` attribute on folder configuration).

- GUI login session duration can be configured to be longer or shorter than
  the default one week, or set to infinitely long. The cookie path can also
  be adjusted. (The `sessionCookieDurationS` and `sessionCookiePath`
  attributes in the GUI configuration.)

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.1.0-rc.1` or `ghcr.io/syncthing/syncthing:2.1.0-rc.1`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(stdiscosrv): close file descriptor on flush error in write by @cuiweixie in #10615
* fix(gui): disable autocomplete for folder password by @bt90 in #10342
* fix(protocol): limit size of incoming request messages by @calmh in #10629
* fix(gui): don't show local device under remote devices (ref #10563) by @maen-bn in #10631
* fix(gui): order folders alphabetically and ensure local device stays hidden (ref #10563, ref #10631) by @maen-bn in #10637
* fix(gui): fallback to folder ID when label is empty in remove dialog by @RealCharlesChia in #10657
* fix(gui): fix tabs visually disabled but still clickable during ignore patterns setup (fixes #10634) by @JRNitre in #10651
* fix(strelaysrv): properly use bind address for outgoing requests (fixes #10658) by @calmh in #10659
### Features
* feat(gui, config): support simple folder grouping (fixes #2070) by @maen-bn in #10563
* feat: make http session cookie path & duration configurable by @vvaswani in #10632
* feat(dialer): add HTTP/HTTPS proxy support via CONNECT by @luizluca in #10572
* feat: make block indexing configurable by @calmh in #10608
### Other
* chore: remove tracking inode change time by @calmh in #10579
* build(deps): temporarily switch to fork of gateway discovery library (fixes #10593) by @marbens-arch in #10594
* build: extract github.ref_name expression to env mapping by @dagecko in #10624
* build: pin 20 third-party actions to immutable commit SHAs by @dagecko in #10625
* build: have dependabot group PRs and use cooldown by @calmh in #10630
* chore: trivial fixes by @calmh in #10650
* chore(model): more efficient tracking of renames during scan by @calmh in #10653
* chore(model): deflake cluster config tests by @calmh in #10662
* chore(model): deflake TestCompletionEmptyGlobal by @calmh in #10663
* chore(scanner): deflake TestStopWalk by @calmh in #10664
* build: parallelise linux builds slightly by @calmh in #10666
* chore(api): deflake TestHTTPLogin on Windows by @calmh in #10667

## New Contributors
* @cuiweixie made their first contribution in #10615
* @dagecko made their first contribution in #10624
* @maen-bn made their first contribution in #10563
* @RealCharlesChia made their first contribution in #10657
* @JRNitre made their first contribution in #10651
* @vvaswani made their first contribution in #10632
* @luizluca made their first contribution in #10572

**Full Changelog**: v2.0.16...v2.1.0-rc.1

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.16` or `ghcr.io/syncthing/syncthing:2.0.16`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(protocol): verify compressed message length before decompression by @calmh in #10595
* fix(systemd): support overrides for syncOwnership by @Valloric in #10602
* fix(systemd): add back chown allowed syscalls by @Valloric in #10605
### Other
* chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in #10573
* build(deps): update dependencies by @calmh in #10588
* chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in #10596

**Full Changelog**: v2.0.15...v2.0.16

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.16-rc.2` or `ghcr.io/syncthing/syncthing:2.0.16-rc.2`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(protocol): verify compressed message length before decompression by @calmh in #10595
* fix(systemd): support overrides for syncOwnership by @Valloric in #10602
* fix(systemd): add back chown allowed syscalls by @Valloric in #10605
### Other
* chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in #10573
* build(deps): update dependencies by @calmh in #10588
* chore(sqlite): reduce max open connections, keep them open permanently (fixes #10592) by @calmh in #10596

**Full Changelog**: v2.0.15...v2.0.16-rc.2

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.16-rc.1` or `ghcr.io/syncthing/syncthing:2.0.16-rc.1`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Other
* chore(config, connections): use same reconnection interval for QUIC and TCP (fixes #10507) by @marbens-arch in #10573

**Full Changelog**: v2.0.15...v2.0.16-rc.1

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.15` or `ghcr.io/syncthing/syncthing:2.0.15`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(gui): show restarting modal during upgrade restart (fixes #1248) by @steadytao in #10566
* fix(gui): remove width limit for language select items by @EastSun5566 in #10531
### Other
* chore(gui): add id and name to Stay logged in checkbox for password managers by @epifeny in #10558
* chore(db): add ability to wait for programmatically started database maintenance, query last maintenance time by @pixelspark in #10565
* chore(etc): add comprehensive sandboxing by @Valloric in #10421
* chore: build with Go 1.26; use Go 1.25 features by @calmh in #10570

## New Contributors
* @epifeny made their first contribution in #10558
* @steadytao made their first contribution in #10566
* @EastSun5566 made their first contribution in #10531
* @Valloric made their first contribution in #10421

**Full Changelog**: v2.0.14...v2.0.15

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.15-rc.1` or `ghcr.io/syncthing/syncthing:2.0.15-rc.1`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(gui): show restarting modal during upgrade restart (fixes #1248) by @steadytao in #10566
* fix(gui): remove width limit for language select items by @EastSun5566 in #10531
### Other
* chore(gui): add id and name to Stay logged in checkbox for password managers by @epifeny in #10558
* chore(db): add ability to wait for programmatically started database maintenance, query last maintenance time by @pixelspark in #10565
* chore(etc): add comprehensive sandboxing by @Valloric in #10421
* chore: build with Go 1.26; use Go 1.25 features by @calmh in #10570

## New Contributors
* @epifeny made their first contribution in #10558
* @steadytao made their first contribution in #10566
* @EastSun5566 made their first contribution in #10531
* @Valloric made their first contribution in #10421

**Full Changelog**: v2.0.14...v2.0.15-rc.1

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.14` or `ghcr.io/syncthing/syncthing:2.0.14`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(beacon): skip point-to-point interfaces on Android by @bt90 in #10504
* fix(stdiscosrv): use fmt.Println for version output (fixes #10523) by @maishivamhoo123 in #10527
* fix(stdiscosrv): log full device ID on startup by @maishivamhoo123 in #10541
### Other
* chore(api): remove charset declaration from JSON content-type (fixes #10500) by @prathik8794 in #10508
* chore(sqlite): allow periodic database maintenance to be disabled by @pixelspark in #10441
* chore(gui): include license files for fork-awesome assets by @gotmax23 in #10539
* build: add build attestation step at release by @calmh in #10540

## New Contributors
* @prathik8794 made their first contribution in #10508
* @gotmax23 made their first contribution in #10539
* @maishivamhoo123 made their first contribution in #10527

**Full Changelog**: v2.0.13...v2.0.14

## Major changes in 2.0

- Database backend switched from LevelDB to SQLite. There is a migration on
  first launch which can be lengthy for larger setups. The new database is
  easier to understand and maintain and, hopefully, less buggy.

- The logging format has changed to use structured log entries (a message
  plus several key-value pairs). Additionally, we can now control the log
  level per package, and a new log level WARNING has been inserted between
  INFO and ERROR (which was previously known as WARNING...). The INFO level
  has become more verbose, indicating the sync actions taken by Syncthing. A
  new command line flag `--log-level` sets the default log level for all
  packages, and the `STTRACE` environment variable and GUI has been updated
  to set log levels per package. The `--verbose` and `--logflags` command
  line options have been removed and will be ignored if given.

- Deleted items are no longer kept forever in the database, instead they are
  forgotten after fifteen months. If your use case require deletes to take
  effect after more than a fifteen month delay, set the
  `--db-delete-retention-interval` command line option or corresponding
  environment variable to zero, or a longer time interval of your choosing.

- Modernised command line options parsing. Old single-dash long options are
  no longer supported, e.g. `-home` must be given as `--home`. Some options
  have been renamed, others have become subcommands. All serve options are
  now also accepted as environment variables. See  `syncthing --help` and
  `syncthing serve --help` for details.

- Rolling hash detection of shifted data is no longer supported as this
  effectively never helped. Instead, scanning and syncing is faster and more
  efficient without it.

- A "default folder" is no longer created on first startup.

- Multiple connections are now used by default between v2 devices. The new
  default value is to use three connections: one for index metadata and two
  for data exchange.

- The following platforms unfortunately no longer get prebuilt binaries for
  download at syncthing.net and on GitHub, due to complexities related to
  cross compilation with SQLite:

  - dragonfly/amd64
  - solaris/amd64
  - linux/ppc64
  - netbsd/*
  - openbsd/386 and openbsd/arm
  - windows/arm

- The handling of conflict resolution involving deleted files has changed. A
  delete can now be the winning outcome of conflict resolution, resulting in
  the deleted file being moved to a conflict copy.

This release is also available as:

* APT repository: https://apt.syncthing.net/

* Docker image: `docker.io/syncthing/syncthing:2.0.14-rc.2` or `ghcr.io/syncthing/syncthing:2.0.14-rc.2`
  (`{docker,ghcr}.io/syncthing/syncthing:2` to follow just the major version)

## What's Changed
### Fixes
* fix(beacon): skip point-to-point interfaces on Android by @bt90 in #10504
* fix(stdiscosrv): use fmt.Println for version output (fixes #10523) by @maishivamhoo123 in #10527
* fix(stdiscosrv): log full device ID on startup by @maishivamhoo123 in #10541
### Other
* chore(api): remove charset declaration from JSON content-type (fixes #10500) by @prathik8794 in #10508
* chore(sqlite): allow periodic database maintenance to be disabled by @pixelspark in #10441
* chore(gui): include license files for fork-awesome assets by @gotmax23 in #10539
* build: add build attestation step at release by @calmh in #10540

## New Contributors
* @prathik8794 made their first contribution in #10508
* @gotmax23 made their first contribution in #10539
* @maishivamhoo123 made their first contribution in #10527

**Full Changelog**: v2.0.13...v2.0.14-rc.2