Skip to content

How to set multiple default fonts with matplotlib? #3010

Closed

Description

@mwaskom

I asked this as a SO question that didn't seem to get any responses.

I don't think this is a bug, but it feels like a bug because I don't understand it :). Feel free to close this and answer over there if you think it is just a misunderstanding.

I want to set the default matplotlib fonts through the rc parameters in a way that is portable to computers that might not have the same set of fonts available.

Here is what I thought would work:

import matplotlib as mpl
import matplotlib.pyplot as plt

mpl.rcParams["font.sans-serif"] = ["Arial", "Liberation Sans", "Bitstream Vera Sans"]
mpl.rcParams["font.family"] = "sans-serif"

ax = plt.subplot()
ax.plot([0, 1, 2], [0, 2, 1])
ax.set_xlabel("the x label")

Because I have Arial installed on my system, I thought that the xlabel would be in Arial. But this approach should mean the default for someone who doesn't have Arial but does have Liberation Sans (i.e. a default Ubuntu system) will be Liberation Sans. And then it should fall back to Bitstream Vera Sans as the default when neither of the two alternate choices are available.

However, this is not what happens. If I do print ax.xaxis.label.get_fontname() it reports Bitstream Vera Sans. Again, I have Arial installed. In other words, I can then do

ax.set_ylabel("the y label", fontdict={"name": "Arial"})
print ax.yaxis.label.get_fontname()

and get Arial.

It feels like I am missing something fundamental about the relationship between the font.family rc parameter and the font.sans-serif parameter when family is "sans serif".

Activity

  1. mdboom commented on Apr 28, 2014

    @mdboom
    Member

    I think the problem you are running into is solved by #2771 -- which has stalled out because we're having trouble getting the test suite to pass on Travis with those changes. We'll need to devote a few cycles to getting that resolved -- but you could try using that patch locally if you want it today.

  2. mwaskom commented on May 8, 2014

    @mwaskom
    Author

    So I'm a little confused, is this is a bug just on 1.3.1, or on anything <= 1.3.1? I'm trying to figure out the best way to work around this in seaborn.

  3. mdboom commented on May 8, 2014

    @mdboom
    Member

    I think it was introduced in 1.3.0 and will be fixed in the next release.

  4. mwaskom commented on May 8, 2014

    @mwaskom
    Author

    Is there an ETA on 1.4? And will there be a 1.3.x bugfix release?

  5. tacaswell commented on May 9, 2014

    @tacaswell
    Member

    'soon' for 1.4 and probably not on 1.3.2.

  6. tacaswell commented on May 17, 2014

    @tacaswell
    Member

    @mwaskom Can you confirm that this is fixed for you an master?

  7. mwaskom commented on May 17, 2014

    @mwaskom
    Author

    I am unable to build matplotlib on my laptop :(

    [matplotlib]{master}$ pip install .
    Unpacking /Users/mwaskom/Code/matplotlib
      Running setup.py egg_info for package from file:///Users/mwaskom/Code/matplotlib
        ============================================================================
        Edit setup.cfg to change the build options
    
        BUILDING MATPLOTLIB
                    matplotlib: yes [1.4.x]
                        python: yes [2.7.6 |Anaconda 1.8.0 (x86_64)| (default, Jan
                                10 2014, 11:23:15)  [GCC 4.0.1 (Apple Inc. build
                                5493)]]
                      platform: yes [darwin]
    
        REQUIRED DEPENDENCIES AND EXTENSIONS
                         numpy: yes [version 1.8.1]
                           six: yes [using six version 1.6.1]
                      dateutil: yes [using dateutil version 2.2]
                       tornado: yes [using tornado version 3.2]
                     pyparsing: yes [using pyparsing version 2.0.1]
                         pycxx: yes [Couldn't import.  Using local copy.]
                        libagg: yes [pkg-config information for 'libagg' could not
                                be found. Using local copy.]
                      freetype: no  [The C/C++ header for freetype2 (ft2build.h)
                                could not be found.  You may need to install the
                                development package.]
                           png: yes [pkg-config information for 'libpng' could not
                                be found. Using unknown version.]
                         qhull: yes [pkg-config information for 'qhull' could not be
                                found. Using local copy.]
    
        OPTIONAL SUBPACKAGES
                   sample_data: yes [installing]
                      toolkits: yes [installing]
                         tests: yes [using nose version 1.3.0 / mock is required to
                                run the matplotlib test suite.  pip/easy_install may
                                attempt to install it after matplotlib.]
    
        OPTIONAL BACKEND EXTENSIONS
                        macosx: yes [installing, darwin]
                        qt4agg: no  [PyQt4 not found]
                       gtk3agg: no  [Requires pygobject to be installed.]
                     gtk3cairo: no  [Requires cairocffi or pycairo to be installed.]
                        gtkagg: no  [Requires pygtk]
                         tkagg: yes [installing, version 81008]
                         wxagg: no  [requires wxPython]
                           gtk: no  [Requires pygtk]
                           agg: yes [installing]
                         cairo: no  [cairocffi or pycairo not found]
                     windowing: no  [Microsoft Windows only]
    
        OPTIONAL LATEX DEPENDENCIES
                        dvipng: yes [version 1.14]
                   ghostscript: no
                         latex: yes [version 3.1415926]
                       pdftops: no
    
        ============================================================================
                                * The following required packages can not be built:
                                * freetype
        Complete output from command python setup.py egg_info:
        ============================================================================
    
    Edit setup.cfg to change the build options
    
    
    
    BUILDING MATPLOTLIB
    
                matplotlib: yes [1.4.x]
    
                    python: yes [2.7.6 |Anaconda 1.8.0 (x86_64)| (default, Jan
    
                            10 2014, 11:23:15)  [GCC 4.0.1 (Apple Inc. build
    
                            5493)]]
    
                  platform: yes [darwin]
    
    
    
    REQUIRED DEPENDENCIES AND EXTENSIONS
    
                     numpy: yes [version 1.8.1]
    
                       six: yes [using six version 1.6.1]
    
                  dateutil: yes [using dateutil version 2.2]
    
                   tornado: yes [using tornado version 3.2]
    
                 pyparsing: yes [using pyparsing version 2.0.1]
    
                     pycxx: yes [Couldn't import.  Using local copy.]
    
                    libagg: yes [pkg-config information for 'libagg' could not
    
                            be found. Using local copy.]
    
                  freetype: no  [The C/C++ header for freetype2 (ft2build.h)
    
                            could not be found.  You may need to install the
    
                            development package.]
    
                       png: yes [pkg-config information for 'libpng' could not
    
                            be found. Using unknown version.]
    
                     qhull: yes [pkg-config information for 'qhull' could not be
    
                            found. Using local copy.]
    
    
    
    OPTIONAL SUBPACKAGES
    
               sample_data: yes [installing]
    
                  toolkits: yes [installing]
    
                     tests: yes [using nose version 1.3.0 / mock is required to
    
                            run the matplotlib test suite.  pip/easy_install may
    
                            attempt to install it after matplotlib.]
    
    
    
    OPTIONAL BACKEND EXTENSIONS
    
                    macosx: yes [installing, darwin]
    
                    qt4agg: no  [PyQt4 not found]
    
                   gtk3agg: no  [Requires pygobject to be installed.]
    
                 gtk3cairo: no  [Requires cairocffi or pycairo to be installed.]
    
                    gtkagg: no  [Requires pygtk]
    
                     tkagg: yes [installing, version 81008]
    
                     wxagg: no  [requires wxPython]
    
                       gtk: no  [Requires pygtk]
    
                       agg: yes [installing]
    
                     cairo: no  [cairocffi or pycairo not found]
    
                 windowing: no  [Microsoft Windows only]
    
    
    
    OPTIONAL LATEX DEPENDENCIES
    
                    dvipng: yes [version 1.14]
    
               ghostscript: no
    
                     latex: yes [version 3.1415926]
    
                   pdftops: no
    
    
    
    ============================================================================
    
                            * The following required packages can not be built:
    
                            * freetype
    
    ----------------------------------------
    Cleaning up...
    Command python setup.py egg_info failed with error code 1 in /var/folders/rr/svlz5yhs0tsdqnsp8g4qg65m0000gn/T/pip-beHCX1-build
    

    Apparently I have freetype 2.4.10 installed, according to conda.

  8. tacaswell commented on May 17, 2014

    @tacaswell
    Member

    Does this PR help? #3032

  9. mwaskom commented on May 17, 2014

    @mwaskom
    Author

    Well, with that I can install matplotlib but not import it

    ---------------------------------------------------------------------------
    ImportError                               Traceback (most recent call last)
    <ipython-input-2-eff513f636fd> in <module>()
    ----> 1 import matplotlib.pyplot as plt
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/pyplot.py in <module>()
         25
         26 import matplotlib
    ---> 27 import matplotlib.colorbar
         28 from matplotlib import style
         29 from matplotlib import _pylab_helpers, interactive
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/colorbar.py in <module>()
         32 import matplotlib.artist as martist
         33 import matplotlib.cbook as cbook
    ---> 34 import matplotlib.collections as collections
         35 import matplotlib.colors as colors
         36 import matplotlib.contour as contour
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/collections.py in <module>()
         25 import matplotlib.artist as artist
         26 from matplotlib.artist import allow_rasterization
    ---> 27 import matplotlib.backend_bases as backend_bases
         28 import matplotlib.path as mpath
         29 from matplotlib import _path
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/backend_bases.py in <module>()
         54
         55 import matplotlib.tight_bbox as tight_bbox
    ---> 56 import matplotlib.textpath as textpath
         57 from matplotlib.path import Path
         58 from matplotlib.cbook import mplDeprecation
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/textpath.py in <module>()
         17 from matplotlib.path import Path
         18 from matplotlib import rcParams
    ---> 19 import matplotlib.font_manager as font_manager
         20 from matplotlib.ft2font import FT2Font, KERNING_DEFAULT, LOAD_NO_HINTING
         21 from matplotlib.ft2font import LOAD_TARGET_LIGHT
    
    /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/font_manager.py in <module>()
         55 import matplotlib
         56 from matplotlib import afm
    ---> 57 from matplotlib import ft2font
         58 from matplotlib import rcParams, get_cachedir
         59 from matplotlib.cbook import is_string_like
    
    ImportError: dlopen(/Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/ft2font.so, 2): Library not loaded: libfreetype.6.dylib
      Referenced from: /Users/mwaskom/anaconda/lib/python2.7/site-packages/matplotlib/ft2font.so
      Reason: image not found
    
  10. tacaswell commented on May 17, 2014

    @tacaswell
    Member

    I guess that is progress? @maciejkula can you take a look at this? iirc @efiring is a mac user. Do we have a local anaconda expert?

  11. efiring commented on May 17, 2014

    @efiring
    Member

    Offhand, it seems like the problem is related overwriting the Anaconda matplotlib with the one you are building with pip. I think I would try to restore a clean Anaconda, and then build and install in some other location. I suppose a virtualenv could be used for this, or maybe the --user option to pip install. That's just a rough outline; I don't know what the best method would be in detail.

  12. mwaskom commented on May 17, 2014

    @mwaskom
    Author

    The example in the first post should be sufficient to test for anyone who has Arial (or Liberation Sans) installed and is using master.

    import matplotlib as mpl
    import matplotlib.pyplot as plt
    
    mpl.rcParams["font.sans-serif"] = ["Arial", "Liberation Sans", "Bitstream Vera Sans"]
    mpl.rcParams["font.family"] = "sans-serif"
    
    ax = plt.subplot()
    ax.plot([0, 1, 2], [0, 2, 1])
    ax.set_xlabel("the x label")
    
    assert ax.xaxis.label.get_fontname() == "Arial"
    
  13. tacaswell commented on May 17, 2014

    @tacaswell
    Member

    Closing this as that example works correctly for me on current master.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Metadata

Metadata

Assignees

No one assigned

    Type

    No type

    Projects

    No projects

      Milestone

      No milestone

      Relationships

      None yet

      Development

      No branches or pull requests

      Issue actions