core.excludesfile clean-up

gitster · gitster · commit 039bc64e8867 · 2007-11-14T15:08:04.000-08:00
There are inconsistencies in the way commands currently handle
the core.excludesfile configuration variable.  The problem is
the variable is too new to be noticed by anything other than
git-add and git-status.

 * git-ls-files does not notice any of the "ignore" files by
   default, as it predates the standardized set of ignore files.
   The calling scripts established the convention to use
   .git/info/exclude, .gitignore, and later core.excludesfile.

 * git-add and git-status know about it because they call
   add_excludes_from_file() directly with their own notion of
   which standard set of ignore files to use.  This is just a
   stupid duplication of code that need to be updated every time
   the definition of the standard set of ignore files is
   changed.

 * git-read-tree takes --exclude-per-directory=&lt;gitignore&gt;,
   not because the flexibility was needed.  Again, this was
   because the option predates the standardization of the ignore
   files.

 * git-merge-recursive uses hardcoded per-directory .gitignore
   and nothing else.  git-clean (scripted version) does not
   honor core.* because its call to underlying ls-files does not
   know about it.  git-clean in C (parked in 'pu') doesn't either.

We probably could change git-ls-files to use the standard set
when no excludes are specified on the command line and ignore
processing was asked, or something like that, but that will be a
change in semantics and might break people's scripts in a subtle
way.  I am somewhat reluctant to make such a change.

On the other hand, I think it makes perfect sense to fix
git-read-tree, git-merge-recursive and git-clean to follow the
same rule as other commands.  I do not think of a valid use case
to give an exclude-per-directory that is nonstandard to
read-tree command, outside a "negative" test in the t1004 test
script.

This patch is the first step to untangle this mess.

The next step would be to teach read-tree, merge-recursive and
clean (in C) to use setup_standard_excludes().

Signed-off-by: Junio C Hamano &lt;gitster@pobox.com&gt;
diff --git a/builtin-add.c b/builtin-add.c
@@ -21,7 +21,6 @@ static const char * const builtin_add_usage[] = {
 };
 
 static int take_worktree_changes;
-static const char *excludes_file;
 
 static void prune_directory(struct dir_struct *dir, const char **pathspec, int prefix)
 {
@@ -61,12 +60,7 @@ static void fill_directory(struct dir_struct *dir, const char **pathspec,
 	memset(dir, 0, sizeof(*dir));
 	if (!ignored_too) {
 		dir->collect_ignored = 1;
-		dir->exclude_per_dir = ".gitignore";
-		path = git_path("info/exclude");
-		if (!access(path, R_OK))
-			add_excludes_from_file(dir, path);
-		if (excludes_file != NULL && !access(excludes_file, R_OK))
-			add_excludes_from_file(dir, excludes_file);
+		setup_standard_excludes(dir);
 	}
 
 	/*
@@ -141,18 +135,6 @@ static void refresh(int verbose, const char **pathspec)
         free(seen);
 }
 
-static int git_add_config(const char *var, const char *value)
-{
-	if (!strcmp(var, "core.excludesfile")) {
-		if (!value)
-			die("core.excludesfile without value");
-		excludes_file = xstrdup(value);
-		return 0;
-	}
-
-	return git_default_config(var, value);
-}
-
 int interactive_add(void)
 {
 	const char *argv[2] = { "add--interactive", NULL };
@@ -193,7 +175,7 @@ int cmd_add(int argc, const char **argv, const char *prefix)
 		exit(interactive_add());
 	}
 
-	git_config(git_add_config);
+	git_config(git_default_config);
 
 	newfd = hold_locked_index(&lock_file, 1);
 
diff --git a/cache.h b/cache.h
@@ -581,6 +581,7 @@ extern int pager_in_use;
 extern int pager_use_color;
 
 extern char *editor_program;
+extern char *excludes_file;
 
 /* base85 */
 int decode_85(char *dst, const char *line, int linelen);
diff --git a/config.c b/config.c
@@ -431,6 +431,13 @@ int git_default_config(const char *var, const char *value)
 		return 0;
 	}
 
+	if (!strcmp(var, "core.excludesfile")) {
+		if (!value)
+			die("core.excludesfile without value");
+		excludes_file = xstrdup(value);
+		return 0;
+	}
+
 	/* Add other config variables here and to Documentation/config.txt. */
 	return 0;
 }
diff --git a/dir.c b/dir.c
@@ -778,3 +778,15 @@ int remove_dir_recursively(struct strbuf *path, int only_empty)
 		ret = rmdir(path->buf);
 	return ret;
 }
+
+void setup_standard_excludes(struct dir_struct *dir)
+{
+	const char *path;
+
+	dir->exclude_per_dir = ".gitignore";
+	path = git_path("info/exclude");
+	if (!access(path, R_OK))
+		add_excludes_from_file(dir, path);
+	if (excludes_file && !access(excludes_file, R_OK))
+		add_excludes_from_file(dir, excludes_file);
+}
diff --git a/dir.h b/dir.h
@@ -71,6 +71,7 @@ extern struct dir_entry *dir_add_name(struct dir_struct *dir, const char *pathna
 extern char *get_relative_cwd(char *buffer, int size, const char *dir);
 extern int is_inside_dir(const char *dir);
 
+extern void setup_standard_excludes(struct dir_struct *dir);
 extern int remove_dir_recursively(struct strbuf *path, int only_empty);
 
 #endif
diff --git a/environment.c b/environment.c
@@ -34,6 +34,7 @@ char *pager_program;
 int pager_in_use;
 int pager_use_color = 1;
 char *editor_program;
+char *excludes_file;
 int auto_crlf = 0;	/* 1: both ways, -1: only when adding git objects */
 
 /* This is set by setup_git_dir_gently() and/or git_default_config() */
diff --git a/wt-status.c b/wt-status.c
@@ -22,7 +22,6 @@ static const char use_add_rm_msg[] =
 "use \"git add/rm <file>...\" to update what will be committed";
 static const char use_add_to_include_msg[] =
 "use \"git add <file>...\" to include in what will be committed";
-static const char *excludes_file;
 
 static int parse_status_slot(const char *var, int offset)
 {
@@ -251,22 +250,16 @@ static void wt_status_print_changed(struct wt_status *s)
 static void wt_status_print_untracked(struct wt_status *s)
 {
 	struct dir_struct dir;
-	const char *x;
 	int i;
 	int shown_header = 0;
 
 	memset(&dir, 0, sizeof(dir));
 
-	dir.exclude_per_dir = ".gitignore";
 	if (!s->untracked) {
 		dir.show_other_directories = 1;
 		dir.hide_empty_directories = 1;
 	}
-	x = git_path("info/exclude");
-	if (file_exists(x))
-		add_excludes_from_file(&dir, x);
-	if (excludes_file && file_exists(excludes_file))
-		add_excludes_from_file(&dir, excludes_file);
+	setup_standard_excludes(&dir);
 
 	read_directory(&dir, ".", "", 0, NULL);
 	for(i = 0; i < dir.nr; i++) {
@@ -364,11 +357,5 @@ int git_status_config(const char *k, const char *v)
 		int slot = parse_status_slot(k, 13);
 		color_parse(v, k, wt_status_colors[slot]);
 	}
-	if (!strcmp(k, "core.excludesfile")) {
-		if (!v)
-			die("core.excludesfile without value");
-		excludes_file = xstrdup(v);
-		return 0;
-	}
 	return git_default_config(k, v);
 }

Original file line number	Diff line number	Diff line change
`@@ -431,6 +431,13 @@ int git_default_config(const char var, const char value)`
`431`	`431`	`return 0;`
`432`	`432`	`}`
`433`	`433`
	`434`	`+ if (!strcmp(var, "core.excludesfile")) {`
	`435`	`+ if (!value)`
	`436`	`+ die("core.excludesfile without value");`
	`437`	`+ excludes_file = xstrdup(value);`
	`438`	`+ return 0;`
	`439`	`+ }`
	`440`	`+`
`434`	`441`	`/* Add other config variables here and to Documentation/config.txt. */`
`435`	`442`	`return 0;`
`436`	`443`	`}`