Add hyperlinks of sources to wind and usspv (#5)

oisindoherty3 · rdmolony · web-flow · commit 875f8e6ea41c · 2021-08-17T11:27:47.000+01:00
* Add hyperlinks of sources to wind and usspv

* Link to Solar &amp; Wind datasets in introduction

Co-authored-by: Rowan Molony &lt;rowan.molony@codema.ie&gt;
diff --git a/_posts/2021-08-10-viable-utility-scale-onshore-wind.md b/_posts/2021-08-10-viable-utility-scale-onshore-wind.md
@@ -9,8 +9,11 @@ tags:
 layout: splash
 read_time: false
 ---
-{% include 2021-08-10-viable-utility-scale-onshore-wind.html %}
+Displays areas suitable for utility scale wind under the specified constraints.  Created using data provided by `data.gov`:
+
+- [mean-offshore-wind-speed-2003-height-75m-above-mean-sea-level](https://data.gov.ie/dataset/mean-offshore-wind-speed-2003-height-75m-above-mean-sea-level?package_type=dataset)
 
+{% include 2021-08-10-viable-utility-scale-onshore-wind.html %}
 
 ## Constraints
 
@@ -19,4 +22,4 @@ read_time: false
 - Not located in an environmentally sensitive area (e.g. SAC, SPA, NHA)
 - Not located within woodland areas or within 200m of woodland areas
 - Located in areas with optimal wind speeds (greater than 8m/s assuming a 75m hub height)
-- Not within 500m of any residential area or within a minimum distance of four times the turbine height from any home - locations of individual homes were not known at the time of writing this report but potential to use the Council’s geodirectory data could be used to model this more accurately, if available.
+- Not within 500m of any residential area or within a minimum distance of four times the turbine height from any home - locations of individual homes were not known at the time of writing this report but potential to use the Council’s geodirectory data could be used to model this more accurately, if available.
diff --git a/_posts/2021-08-10-viable-utility-scale-solar-pv.md b/_posts/2021-08-10-viable-utility-scale-solar-pv.md
@@ -9,6 +9,11 @@ tags:
 layout: splash
 read_time: false
 ---
+Displays areas suitable for utility scale solar under the specified constraints.  Created using data provided by `europa` and `data.gov`:
+
+- [urban-atlas](https://data.europa.eu/data/datasets/data_urban-atlas?locale=en) 
+- [digital-elevation-model-of-ireland-from-nasas-shuttle-radar-topography-mission-srtm](https://data.gov.ie/dataset/digital-elevation-model-of-ireland-from-nasas-shuttle-radar-topography-mission-srtm)
+
 {% include 2021-08-10-viable-utility-scale-solar-pv.html %}
 
 ## Constraints
@@ -21,4 +26,4 @@ The selection of suitable sites, as seen in this map, are based upon a number of
 - Areas that do not have a northward slope (slope with aspect within 45° of due north) of greater than 10° to the horizontal - Codema generated slope and aspect maps using a digital elevation model (DEM)
 - Area not within 30m of woodland to avoid issues with shading and falling leaves or within 30m of road or rail to avoid dust and debris - this is a general assumption that can be adjusted for specific sites as part of a more detailed feasibility study.
 - The typical minimum size for a viable industrial-scale PV farm is 5 MW. A farm of this size would require a land area of approximately 10 hectares - Codema removed any land parcel smaller than 10ha that are not directly adjacent to any other sites (which together would sum to 10ha)
-- Areas not within 100m of existing roads or rail lines to avoid potential glint and glare concerns. 
+- Areas not within 100m of existing roads or rail lines to avoid potential glint and glare concerns. 
