docs: Spelling mistakes

mcauser · pfalcon · commit ce166e6b68b7 · 2016-08-02T11:17:46.000+03:00
diff --git a/docs/README.md b/docs/README.md
@@ -35,6 +35,6 @@ This can be achieved with:
     make MICROPY_PORT=<port_name> latexpdf
 
 but require rather complete install of LaTeX with various extensions. On
-Debiab/Ubuntu, try (500MB+ download):
+Debian/Ubuntu, try (500MB+ download):
 
     apt-get install texlive-latex-recommended texlive-latex-extra
diff --git a/docs/esp8266/general.rst b/docs/esp8266/general.rst
@@ -52,7 +52,7 @@ For your convenience, some of technical specifications are provided below:
   external FlashROM, UART, deep sleep wake-up, etc.)
 * UART: One RX/TX UART (no hardware handshaking), one TX-only UART.
 * SPI: 2 SPI interfaces (one used for FlashROM).
-* I2C: No native extenal I2C (bitbang implementation available on any pins).
+* I2C: No native external I2C (bitbang implementation available on any pins).
 * I2S: 1.
 * Programming: using BootROM bootloader from UART. Due to external FlashROM
   and always-available BootROM bootloader, ESP8266 is not brickable.
diff --git a/docs/esp8266/tutorial/repl.rst b/docs/esp8266/tutorial/repl.rst
@@ -36,7 +36,7 @@ WebREPL - a prompt over WiFi
 WebREPL allows you to use the Python prompt over WiFi, connecting through a
 browser. The latest versions of Firefox and Chrome are supported.
 
-For your convinience, WebREPL client is hosted at
+For your convenience, WebREPL client is hosted at
 `<http://micropython.org/webrepl>`__ . Alternatively, you can install it
 locally from the the GitHub repository
 `<https://github.com/micropython/webrepl>`__ .
diff --git a/docs/library/builtins.rst b/docs/library/builtins.rst
@@ -1,7 +1,7 @@
 Builtin Functions
 =================
 
-All builtin functions are described here. They are alse available via
+All builtin functions are described here. They are also available via
 ``builtins`` module.
 
 .. function:: abs()
diff --git a/docs/library/esp.rst b/docs/library/esp.rst
@@ -15,7 +15,7 @@ Functions
     Get or set the sleep type.
 
     If the ``sleep_type`` parameter is provided, sets the sleep type to its
-    value. If the function is called wihout parameters, returns the current
+    value. If the function is called without parameters, returns the current
     sleep type.
 
     The possible sleep types are defined as constants:
diff --git a/docs/library/machine.Pin.rst b/docs/library/machine.Pin.rst
@@ -84,7 +84,7 @@ Methods
 
             - ``None`` - no pull up or down resistor.
             - ``Pin.PULL_UP`` - pull up resistor enabled.
-            - ``Pin.PULL_DOWN`` - pull down resitor enabled.
+            - ``Pin.PULL_DOWN`` - pull down resistor enabled.
 
          - ``drive`` can be one of:
 
diff --git a/docs/library/machine.RTC.rst b/docs/library/machine.RTC.rst
@@ -39,7 +39,7 @@ Methods
 
 .. method:: RTC.alarm(id, time, /*, repeat=False)
 
-   Set the RTC alarm. Time might be either a milllisecond value to program the alarm to
+   Set the RTC alarm. Time might be either a millisecond value to program the alarm to
    current time + time_in_ms in the future, or a datetimetuple. If the time passed is in
    milliseconds, repeat can be set to ``True`` to make the alarm periodic.
 
diff --git a/docs/library/machine.SPI.rst b/docs/library/machine.SPI.rst
@@ -45,7 +45,7 @@ Methods
        respectively.
      - ``bits`` is the width of each transfer, accepted values are 8, 16 and 32.
      - ``firstbit`` can be ``SPI.MSB`` only.
-     - ``pins`` is an optional tupple with the pins to assign to the SPI bus.
+     - ``pins`` is an optional tuple with the pins to assign to the SPI bus.
 
 .. method:: SPI.deinit()
 
diff --git a/docs/library/machine.Timer.rst b/docs/library/machine.Timer.rst
@@ -104,7 +104,7 @@ Methods
        If only a channel identifier passed, then a previously initialized channel
        object is returned (or ``None`` if there is no previous channel).
 
-       Othwerwise, a TimerChannel object is initialized and returned.
+       Otherwise, a TimerChannel object is initialized and returned.
        
        The operating mode is is the one configured to the Timer object that was used to
        create the channel.
@@ -152,7 +152,7 @@ Methods
 
     .. method:: timerchannel.irq(\*, trigger, priority=1, handler=None)
 
-        The behavior of this callback is heaviliy dependent on the operating
+        The behavior of this callback is heavily dependent on the operating
         mode of the timer channel:
 
             - If mode is ``Timer.PERIODIC`` the callback is executed periodically
diff --git a/docs/library/machine.UART.rst b/docs/library/machine.UART.rst
@@ -167,7 +167,7 @@ Methods
     .. data:: UART.EVEN
     .. data:: UART.ODD
 
-        parity types (anlong with ``None``)
+        parity types (along with ``None``)
 
     .. data:: UART.RX_ANY
 
diff --git a/docs/library/machine.rst b/docs/library/machine.rst
@@ -57,7 +57,7 @@ Power related functions
    Gates the clock to the CPU, useful to reduce power consumption at any time during
    short or long periods. Peripherals continue working and execution resumes as soon
    as any interrupt is triggered (on many ports this includes system timer
-   interrupt occuring at regular intervals on the order of millisecond).
+   interrupt occurring at regular intervals on the order of millisecond).
 
 .. function:: sleep()
 
@@ -96,7 +96,7 @@ Miscellaneous functions
 
 .. function:: unique_id()
 
-   Returns a byte string with a unique idenifier of a board/SoC. It will vary
+   Returns a byte string with a unique identifier of a board/SoC. It will vary
    from a board/SoC instance to another, if underlying hardware allows. Length
    varies by hardware (so use substring of a full value if you expect a short
    ID). In some MicroPython ports, ID corresponds to the network MAC address.
diff --git a/docs/library/network.rst b/docs/library/network.rst
@@ -237,7 +237,7 @@ For example::
         Get or set the PHY mode.
 
         If the ``mode`` parameter is provided, sets the mode to its value. If
-        the function is called wihout parameters, returns the current mode.
+        the function is called without parameters, returns the current mode.
 
         The possible modes are defined as constants:
             * ``MODE_11B`` -- IEEE 802.11b,
@@ -319,7 +319,7 @@ For example::
             * ``STAT_WRONG_PASSWORD`` -- failed due to incorrect password,
             * ``STAT_NO_AP_FOUND`` -- failed because no access point replied,
             * ``STAT_CONNECT_FAIL`` -- failed due to other problems,
-            * ``STAT_GOT_IP`` -- connection susccessful.
+            * ``STAT_GOT_IP`` -- connection successful.
 
     .. method:: wlan.isconnected()
 
@@ -329,7 +329,7 @@ For example::
 
     .. method:: wlan.ifconfig([(ip, subnet, gateway, dns)])
 
-       Get/set IP-level network interface paremeters: IP address, subnet mask,
+       Get/set IP-level network interface parameters: IP address, subnet mask,
        gateway and DNS server. When called with no arguments, this method returns
        a 4-tuple with the above information. To set the above values, pass a
        4-tuple with the required information.  For example::
@@ -343,8 +343,8 @@ For example::
        with additional parameters beyond standard IP configuration (as dealt with by
        ``wlan.ifconfig()``). These include network-specific and hardware-specific
        parameters. For setting parameters, keyword argument syntax should be used,
-       multiple parameters can be set at once. For querying, paremeters name should
-       be quoted as a string, and only one paramter can be queries at time::
+       multiple parameters can be set at once. For querying, parameters name should
+       be quoted as a string, and only one parameter can be queries at time::
 
         # Set WiFi access point name (formally known as ESSID) and WiFi channel
         ap.config(essid='My AP', channel=11)
@@ -397,7 +397,7 @@ For example::
     .. note::
 
        The ``WLAN`` constructor is special in the sense that if no arguments besides the id are given,
-       it will return the already exisiting ``WLAN`` instance without re-configuring it. This is
+       it will return the already existing ``WLAN`` instance without re-configuring it. This is
        because ``WLAN`` is a system feature of the WiPy. If the already existing instance is not
        initialized it will do the same as the other constructors an will initialize it with default
        values.
diff --git a/docs/library/pyb.ADC.rst b/docs/library/pyb.ADC.rst
@@ -13,7 +13,7 @@ class ADC -- analog to digital conversion
         adc = pyb.ADC(pin)              # create an analog object from a pin
         val = adc.read()                # read an analog value
     
-        adc = pyb.ADCAll(resolution)    # creale an ADCAll object
+        adc = pyb.ADCAll(resolution)    # create an ADCAll object
         val = adc.read_channel(channel) # read the given channel
         val = adc.read_core_temp()      # read MCU temperature
         val = adc.read_core_vbat()      # read MCU VBAT
diff --git a/docs/library/pyb.DAC.rst b/docs/library/pyb.DAC.rst
@@ -79,7 +79,7 @@ Methods
 .. method:: DAC.triangle(freq)
 
    Generate a triangle wave.  The value on the DAC output changes at
-   the given frequency, and the frequence of the repeating triangle wave
+   the given frequency, and the frequency of the repeating triangle wave
    itself is 2048 times smaller.
 
 .. method:: DAC.write(value)
diff --git a/docs/library/pyb.ExtInt.rst b/docs/library/pyb.ExtInt.rst
@@ -7,7 +7,7 @@ class ExtInt -- configure I/O pins to interrupt on external events
 There are a total of 22 interrupt lines. 16 of these can come from GPIO pins
 and the remaining 6 are from internal sources.
 
-For lines 0 thru 15, a given line can map to the corresponding line from an
+For lines 0 through 15, a given line can map to the corresponding line from an
 arbitrary port. So line 0 can map to Px0 where x is A, B, C, ... and
 line 1 can map to Px1 where x is A, B, C, ... ::
 
@@ -27,7 +27,7 @@ explanation, along with various techniques for debouncing.
 Trying to register 2 callbacks onto the same pin will throw an exception.
 
 If pin is passed as an integer, then it is assumed to map to one of the
-internal interrupt sources, and must be in the range 16 thru 22.
+internal interrupt sources, and must be in the range 16 through 22.
 
 All other pin objects go through the pin mapper to come up with one of the
 gpio pins. ::
diff --git a/docs/library/pyb.I2C.rst b/docs/library/pyb.I2C.rst
@@ -39,7 +39,7 @@ Printing the i2c object gives you information about its configuration.
 
     You can specify a timeout (in ms)::
 
-        i2c.send(b'123', timeout=2000)   # timout after 2 seconds
+        i2c.send(b'123', timeout=2000)   # timeout after 2 seconds
 
     A master must specify the recipient's address::
 
diff --git a/docs/library/pyb.Pin.rst b/docs/library/pyb.Pin.rst
@@ -231,7 +231,7 @@ Constants
     class PinAF -- Pin Alternate Functions
     ======================================
     
-    A Pin represents a physical pin on the microcprocessor. Each pin
+    A Pin represents a physical pin on the microprocessor. Each pin
     can have a variety of functions (GPIO, I2C SDA, etc). Each PinAF
     object represents a particular function for a pin.
     
@@ -240,7 +240,7 @@ Constants
         x3 = pyb.Pin.board.X3
         x3_af = x3.af_list()
     
-    x3_af will now contain an array of PinAF objects which are availble on
+    x3_af will now contain an array of PinAF objects which are available on
     pin X3.
     
     For the pyboard, x3_af would contain:
diff --git a/docs/library/pyb.RTC.rst b/docs/library/pyb.RTC.rst
@@ -73,7 +73,7 @@ Methods
        value, which is an integer in the range [-511 : 512].  With one
        argument it sets the RTC calibration.
     
-       The RTC Smooth Calibration mechanism addjusts the RTC clock rate by
+       The RTC Smooth Calibration mechanism adjusts the RTC clock rate by
        adding or subtracting the given number of ticks from the 32768 Hz
        clock over a 32 second period (corresponding to 2^20 clock ticks.)
        Each tick added will speed up the clock by 1 part in 2^20, or 0.954
diff --git a/docs/library/pyb.Timer.rst b/docs/library/pyb.Timer.rst
@@ -78,7 +78,7 @@ Methods
        
        Keyword arguments:
        
-         - ``freq`` --- specifies the periodic frequency of the timer. You migh also
+         - ``freq`` --- specifies the periodic frequency of the timer. You might also
            view this as the frequency with which the timer goes through one complete cycle.
        
          - ``prescaler`` [0-0xffff] - specifies the value to be loaded into the
@@ -97,7 +97,7 @@ Methods
     
            - ``Timer.UP`` - configures the timer to count from 0 to ARR (default)
            - ``Timer.DOWN`` - configures the timer to count from ARR down to 0.
-           - ``Timer.CENTER`` - confgures the timer to count from 0 to ARR and
+           - ``Timer.CENTER`` - configures the timer to count from 0 to ARR and
              then back down to 0.
        
          - ``div`` can be one of 1, 2, or 4. Divides the timer clock to determine
@@ -109,7 +109,7 @@ Methods
            transitions on complimentary channels (both channels will be inactive)
            for this time). ``deadtime`` may be an integer between 0 and 1008, with
            the following restrictions: 0-128 in steps of 1. 128-256 in steps of
-           2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadime``
+           2, 256-512 in steps of 8, and 512-1008 in steps of 16. ``deadtime``
            measures ticks of ``source_freq`` divided by ``div`` clock ticks.
            ``deadtime`` is only available on timers 1 and 8.
        
@@ -141,7 +141,7 @@ Methods
        If only a channel number is passed, then a previously initialized channel
        object is returned (or ``None`` if there is no previous channel).
        
-       Othwerwise, a TimerChannel object is initialized and returned.
+       Otherwise, a TimerChannel object is initialized and returned.
        
        Each channel can be configured to perform pwm, output compare, or
        input capture. All channels share the same underlying timer, which means
@@ -183,7 +183,7 @@ Methods
          - ``polarity`` can be one of:
     
            - ``Timer.HIGH`` - output is active high
-           - ``Timer.LOW`` - output is acive low
+           - ``Timer.LOW`` - output is active low
        
        Optional keyword arguments for Timer.IC modes:
        
diff --git a/docs/library/pyb.rst b/docs/library/pyb.rst
@@ -46,7 +46,7 @@ Time related functions
    Returns the number of milliseconds which have elapsed since ``start``.
    
    This function takes care of counter wrap, and always returns a positive
-   number. This means it can be used to measure periods upto about 12.4 days.
+   number. This means it can be used to measure periods up to about 12.4 days.
    
    Example::
 
@@ -59,7 +59,7 @@ Time related functions
    Returns the number of microseconds which have elapsed since ``start``.
    
    This function takes care of counter wrap, and always returns a positive
-   number. This means it can be used to measure periods upto about 17.8 minutes.
+   number. This means it can be used to measure periods up to about 17.8 minutes.
    
    Example::
 
diff --git a/docs/library/ubinascii.rst b/docs/library/ubinascii.rst
@@ -17,7 +17,7 @@ Functions
    .. admonition:: Difference to CPython
       :class: attention
 
-      If additional argument, `sep` is supplied, it is used as a seperator
+      If additional argument, `sep` is supplied, it is used as a separator
       between hexadecimal values.
 
 .. function:: unhexlify(data)
diff --git a/docs/library/ucollections.rst b/docs/library/ucollections.rst
@@ -13,10 +13,10 @@ Classes
 .. function:: namedtuple(name, fields)
 
     This is factory function to create a new namedtuple type with a specific
-    name and set of fields. A namedtyple is a subclass of tuple which allows
+    name and set of fields. A namedtuple is a subclass of tuple which allows
     to access its fields not just by numeric index, but also with an attribute
     access syntax using symbolic field names. Fields is a sequence of strings
-    specifying field names. For compatibily with CPython it can also be a
+    specifying field names. For compatibility with CPython it can also be a
     a string with space-separated field named (but this is less efficient).
     Example of use::
 
diff --git a/docs/library/uctypes.rst b/docs/library/uctypes.rst
@@ -118,7 +118,7 @@ Module contents
 
 .. data:: BIG_ENDIAN
 
-   Layour type for a big-endian packed structure.
+   Layout type for a big-endian packed structure.
 
 .. data:: NATIVE
 
@@ -184,7 +184,7 @@ Subscripting a pointer with other integer values but 0 are supported too,
 with the same semantics as in C.
 
 Summing up, accessing structure fields generally follows C syntax,
-except for pointer derefence, when you need to use ``[0]`` operator
+except for pointer dereference, when you need to use ``[0]`` operator
 instead of ``*``.
 
 Limitations
diff --git a/docs/library/uhashlib.rst b/docs/library/uhashlib.rst
@@ -9,7 +9,7 @@
     This module implements binary data hashing algorithms. Currently, it
     implements SHA256 algorithm. Choosing SHA256 was a deliberate choice,
     as a modern, cryptographically secure algorithm. This means that a
-    single algorithm can cover both usecases of "any hash algorithm" and
+    single algorithm can cover both use cases of "any hash algorithm" and
     security-related usage, and thus save space omitting legacy algorithms
     like MD5 or SHA1.
 
@@ -53,7 +53,7 @@ Constructors
       
        Example::
       
-           hash = uhashlib.sha1('abcd1234', 1001)    # lenght of the initial piece is multiple of 4 bytes
+           hash = uhashlib.sha1('abcd1234', 1001)    # length of the initial piece is multiple of 4 bytes
            hash.update('1234')                       # also multiple of 4 bytes
            ...
            hash.update('12345')                      # last chunk may be of any length
@@ -68,7 +68,7 @@ Methods
 
 .. method:: hash.digest()
 
-   Return hash for all data passed thru hash, as a bytes object. After this
+   Return hash for all data passed through hash, as a bytes object. After this
    method is called, more data cannot be fed into hash any longer.
 
    .. only:: port_wipy
diff --git a/docs/library/uio.rst b/docs/library/uio.rst
@@ -12,7 +12,7 @@ Functions
 
 .. function:: open(name, mode='r', **kwargs)
 
-    Open a file. Builtin ``open()`` function is alised to this function.
+    Open a file. Builtin ``open()`` function is aliased to this function.
     All ports (which provide access to file system) are required to support
     `mode` parameter, but support for other arguments vary by port.
 
diff --git a/docs/library/uos.rst b/docs/library/uos.rst
@@ -81,7 +81,7 @@ Functions
 
     .. function:: unmount(path)
 
-       Unmounts a prevoulsy mounted block device from the given path.
+       Unmounts a previously mounted block device from the given path.
 
     .. function:: mkfs(block_device or path)
 
diff --git a/docs/library/utime.rst b/docs/library/utime.rst
@@ -117,7 +117,7 @@ Functions
 .. function:: time()
 
    Returns the number of seconds, as an integer, since the Epoch, assuming that underlying
-   RTC is set and maintained as decsribed above. If an RTC is not set, this function returns
+   RTC is set and maintained as described above. If an RTC is not set, this function returns
    number of seconds since a port-specific reference point in time (for embedded boards without
    a battery-backed RTC, usually since power up or reset). If you want to develop portable
    MicroPython application, you should not rely on this function to provide higher than second
diff --git a/docs/pyboard/tutorial/timer.rst b/docs/pyboard/tutorial/timer.rst
diff --git a/docs/pyboard/tutorial/usb_mouse.rst b/docs/pyboard/tutorial/usb_mouse.rst
diff --git a/docs/reference/asm_thumb2_hints_tips.rst b/docs/reference/asm_thumb2_hints_tips.rst
diff --git a/docs/reference/asm_thumb2_label_branch.rst b/docs/reference/asm_thumb2_label_branch.rst
diff --git a/docs/reference/isr_rules.rst b/docs/reference/isr_rules.rst
diff --git a/docs/reference/repl.rst b/docs/reference/repl.rst
diff --git a/docs/wipy/general.rst b/docs/wipy/general.rst
diff --git a/docs/wipy/quickref.rst b/docs/wipy/quickref.rst
diff --git a/docs/wipy/tutorial/intro.rst b/docs/wipy/tutorial/intro.rst
