Documents the available task in the module and their parameters.

• isMC=false produce additional MC plots
• useTrkPID=false propagate tracks with their pid hypothesis

• minPtITSCut=0.1f minimum ITS track momentum
• etaITSCut=1.4f maximum ITS track eta
• minNITSClustersCut=0 minimum number of ITS clusters
• maxChi2PerClusterITS=1e10f maximum chi2/ITS cluster

• minPtTPCCut=0.1f minimum TPC track momentum
• etaITSCut=1.4f maximum ITS track eta
• minTPCClustersCut=60 minimum number of TPC clusters
• minDCACut=100.f minimum TPC track DCA Z
• minDCACutY=10.f minimum TPC track DCA Y

• minPtCut=0.1f minimum ITS-TPC momentum
• maxPtCut=20.f maximum ITS-TPC momentum
• etaCut=1.4f maximum ITS-TPC track eta

• isSync=false synchronous processing, needed for all following parameters

• doMTCRatios=false produce MTC ratio plots

• doK0QC=false produce K0s plots
• maxK0Eta=0.8f maximum K0s eta
• refitK0=false refit K0 prongs
• cutK0Mass=0.05f cut around K0s peak
• trackSourcesK0 SVertexer input sources
• publishK0s3D=false publish 3D cycle,integral histograms
• splitK0sMassOccupancy=float splitting point in TPC occupancy to define low and high region by default off
• splitK0sMassPt=float splitting point in pt to define low and high region by default off

• K0Fitter options

• doPVITSQC=false produce ITS vs PV plots (not implemented yet)

• showPt=false show check on MTC pt
• thresholdPt=0.5f threshold on MTC pt
• minPt=1.0f check range left
• maxPt=1.999f check range right

• showPhi=false show check on MTC phi
• thresholdPhi=0.3f threshold on MTC phi

• showEta=false show check on MTC eta
• thresholdEta=0.4f threshold on MTC eta
• minEta=-0.8f check range left
• maxEta=0.8f check range right

• showK0s=false show check on K0s mass
• acceptableK0sRError=0.2f acceptable relative error to pdg value
• acceptableK0sUncertainty=0.2f acceptable uncertainty to pdg value

• K0Fitter options

• limitRanges=5 maximum number of bad intervals shown

Trends mean and sigma of fit.

• mean aggregated mass value
• sigma aggregated sigma value

Trends MTC at given pt.

• mtc mtc efficiency

• pt take value at this pt

Trends constant + slope of straight line fit in given range.

• pol0 constant
• pol1 slope

• r0 start fit range
• r1 end fit range

Does a pol2 + Gaus fit.

• k0sBackgroundRejLeft=0.48 reject region in background fit from left side of mass peak
• k0sBackgroundRejRight=0.51 reject region in background fit to right side of mass peak
• k0sBackgroundRangeLeft=0.45 absolute left range to fit background
• k0sBackgroundRangeRight=0.54 absolute right range to fit background