Huawei OptiXaccess EA5801S-FL16
Outdoor and Compact OLT
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
Huawei OptiXaccess EA5801S-FL16
The Huawei OptiXaccess EA5801S-FL16 is a compact outdoor blade OLT. It provides 16 Flex-PON ports to support FTTH coverage in remote areas, evolution from cable networks to FTTH networks.
High Density with 16 Flex-PON Ports
Provides 16 Flex-PON service ports, and can work with different optical modules to implement hybrid access of GPON, XGS-PON, and GPON Combo.
Pre-connected Without Splicing
The end-to-end pre-connection makes devices plug-and-play and eliminates the need of fiber splicing.
Light and Compact
The device weighs no more than 15 kg and has a volume of only 12 L. A single person can install the device.
Specifications
| Specification | Huawei OptiXaccess EA5801S-FL16 |
| Dimensions (H x W x D) (mm) | 400 x 300 x 120 |
| Weight | About 15kg |
| Power supply mode | • DC power supply • AC power supply |
| Rated voltage | • DC power supply: –48 V to –60 V • AC power supply: 100 V–240 V |
| Maximum input current | • DC power supply: 6 A • AC power supply: 2.5 A |
| Protection rating | IP65 |
| Surge protection level | • AC power port: 20 kA in difference and common modes • DC power port: 10 kA in differential mode and 20 kA in common mode |
| Operating temperature | –40°C to +50°C (with solar radiation); minimum startup temperature: –25°C |
| Operating humidity | 5% RH to 95% RH |
| Atmospheric pressure | 70 kPa to 106 kPa |
| Altitude | • Below 4000 m • NOTE • The air density varies with the altitude, which affects the heat dissipation • capability of devices. Therefore, the operating temperature of the device • changes with the altitude. |
| System switching capacity | 460 Gbit/s |
| MAC addresses | 32767 |
| Access ONT | 2048 |
| IPv4 routing table | 8192 |
| IPv6 routing table | 4096 |
| ARP table | 16384 |
| 10GE/GE upstream ports | 4 |
| Service ports | 16 Flex-PON |
| Power consumption | • Static Power Consumption: DC power supply: 64 W AC power supply: 65 W • Typical Power Consumption: DC power supply: 115 W AC power supply: 120 W • Maximum Power Consumption: DC power supply: 132 W AC power supply: 135 W • NOTE • The power consumption of the device is calculated based on the following conditions: Static power consumption: 25°C, no optical module in any optical port, and no service running. Typical power consumption: 25°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full traffic. Maximum power consumption: 50°C, 4 x 10GE upstream transmission, 16 x XGS COMBO ports, full service configuration, and full traffic |