code-f2e6b303aa8a/share/roundup/templates/classic/.cvsignore 0000644 0000000 0000000 00000000040 11640641074 022213 0 ustar 0000000 0000000 *.pyc
*.pyo
htmlbase.py
*.cover
code-f2e6b303aa8a/share/roundup/templates/classic/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000531 11640641074 022725 0 ustar 0000000 0000000 Name: classic
Description: This is a generic issue tracker that may be used to track bugs,
feature requests, project issues or any number of other types
of issues. Most users of Roundup will find that this template
suits them, with perhaps a few customisations.
Intended-For: All first-time Roundup users
code-f2e6b303aa8a/share/roundup/templates/classic/detectors/.cvsignore 0000644 0000000 0000000 00000000024 11640641074 024211 0 ustar 0000000 0000000 *.pyc
*.pyo
*.cover
code-f2e6b303aa8a/share/roundup/templates/classic/detectors/messagesummary.py 0000644 0000000 0000000 00000001063 11640641074 025631 0 ustar 0000000 0000000 #$Id: messagesummary.py,v 1.2 2007-04-03 06:47:21 a1s Exp $
from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if newvalues.has_key('summary') or not newvalues.has_key('content'):
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
code-f2e6b303aa8a/share/roundup/templates/classic/detectors/nosyreaction.py 0000644 0000000 0000000 00000012740 11640641074 025310 0 ustar 0000000 0000000 #
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
#
#$Id: nosyreaction.py,v 1.4 2005-04-04 08:47:14 richard Exp $
# Python 2.3 ... 2.6 compatibility:
from roundup.anypy.sets_ import set
from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError, message:
raise roundupdb.DetectorError, message
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif oldvalues.has_key('messages'):
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if not m.has_key(msgid):
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if not newvalues.has_key('nosy'):
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if newvalues.has_key('nosy'):
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if newvalues.has_key('assignedto') and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if newvalues.has_key('messages'):
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.issue.react('create', nosyreaction)
db.issue.react('set', nosyreaction)
db.issue.audit('create', updatenosy)
db.issue.audit('set', updatenosy)
# vim: set filetype=python ts=4 sw=4 et si
code-f2e6b303aa8a/share/roundup/templates/classic/detectors/statusauditor.py 0000644 0000000 0000000 00000005621 11640641074 025506 0 ustar 0000000 0000000 # Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
#$Id: statusauditor.py,v 1.5 2004-03-27 00:01:48 richard Exp $
def chatty(db, cl, nodeid, newvalues):
''' If the issue is currently 'unread', 'resolved', 'done-cbb' or None,
then set it to 'chatting'
'''
# don't fire if there's no new message (ie. chat)
if not newvalues.has_key('messages'):
return
if newvalues['messages'] == cl.get(nodeid, 'messages'):
return
# get the chatting state ID
try:
chatting_id = db.status.lookup('chatting')
except KeyError:
# no chatting state, ignore all this stuff
return
# get the current value
current_status = cl.get(nodeid, 'status')
# see if there's an explicit change in this transaction
if newvalues.has_key('status'):
# yep, skip
return
# determine the id of 'unread', 'resolved' and 'chatting'
fromstates = []
for state in 'unread resolved done-cbb'.split():
try:
fromstates.append(db.status.lookup(state))
except KeyError:
pass
# ok, there's no explicit change, so check if we are in a state that
# should be changed
if current_status in fromstates + [None]:
# yep, we're now chatting
newvalues['status'] = chatting_id
def presetunread(db, cl, nodeid, newvalues):
''' Make sure the status is set on new issues
'''
if newvalues.has_key('status') and newvalues['status']:
return
# get the unread state ID
try:
unread_id = db.status.lookup('unread')
except KeyError:
# no unread state, ignore all this stuff
return
# ok, do it
newvalues['status'] = unread_id
def init(db):
# fire before changes are made
db.issue.audit('set', chatty)
db.issue.audit('create', presetunread)
# vim: set filetype=python ts=4 sw=4 et si
code-f2e6b303aa8a/share/roundup/templates/classic/detectors/userauditor.py 0000644 0000000 0000000 00000007747 11640641074 025154 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
#$Id: userauditor.py,v 1.9 2007-09-12 21:11:13 jpend Exp $
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if user.has_key('address'):
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
'''
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError, 'Email address syntax is invalid'
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError, 'Email address %s already in use' % address
for rolename in [r.lower().strip() for r in newvalues.get('roles', '').split(',')]:
if rolename and not db.security.role.has_key(rolename):
raise ValueError, 'Role "%s" does not exist'%rolename
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError, 'Timezone "%s" does not exist' % tz
except ValueError:
raise ValueError, 'Timezone "%s" exceeds valid range [-23...23]' % tz
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-f2e6b303aa8a/share/roundup/templates/classic/extensions/README.txt 0000644 0000000 0000000 00000000201 11640641074 024107 0 ustar 0000000 0000000 This directory is for tracker extensions:
- CGI Actions
- Templating functions
See the customisation doc for more information.
code-f2e6b303aa8a/share/roundup/templates/classic/html/_generic.404.html 0000644 0000000 0000000 00000000253 11640641074 024134 0 ustar 0000000 0000000
Item Not Found
There is no with id
code-f2e6b303aa8a/share/roundup/templates/classic/html/_generic.calendar.html 0000644 0000000 0000000 00000001410 11640641074 025372 0 ustar 0000000 0000000
code-f2e6b303aa8a/share/roundup/templates/classic/html/_generic.collision.html 0000644 0000000 0000000 00000001367 11640641074 025627 0 ustar 0000000 0000000 <span tal:replace="python:context._classname.capitalize()"
i18n:name="class" /> Edit Collision - <span i18n:name="tracker"
tal:replace="config/TRACKER_NAME" /> Edit Collision
code-f2e6b303aa8a/share/roundup/templates/classic/html/_generic.help-empty.html 0000644 0000000 0000000 00000000261 11640641074 025710 0 ustar 0000000 0000000
Empty page (no search performed yet)
Please specify your search parameters!
code-f2e6b303aa8a/share/roundup/templates/classic/html/_generic.help-list.html 0000644 0000000 0000000 00000005406 11640641074 025533 0 ustar 0000000 0000000
Search result for user helper
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column. If you wish to restore a
removed item and you know its id then just put that id in the id column.
code-f2e6b303aa8a/share/roundup/templates/classic/html/help_controls.js 0000644 0000000 0000000 00000020366 11640641074 024405 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Keyword and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
// either a checkbox object or an array of checkboxes
var check = document.frm_help.check;
if ((check.length == undefined) && (check.checked != undefined)) {
// only one checkbox on page
if (check.checked) {
list = check.value;
}
} else {
// array of checkboxes
for (box=0; box < check.length; box++) {
if (check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + check[box].value;
}
}
}
return list;
}
/**
* update the field in the opening window;
* the text_field variable must be set in the calling page
*/
function updateOpener() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = text_field.value;
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList_framed(form, textfield) {
// update the checkboxes based on the preview field
// alert('reviseList_framed')
// alert(form)
if (form.check==undefined)
return;
// alert(textfield)
var to_check;
var list = textfield.value.split(",");
if (form.check.length==undefined) {
check = form.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < form.check.length; box++) {
check = form.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
function checkRequiredFields(fields)
{
var bonk='';
var res='';
var argv = checkRequiredFields.arguments;
var argc = argv.length;
var input = '';
var val='';
for (var i=0; i < argc; i++) {
fi = argv[i];
input = document.getElementById(fi);
if (input) {
val = input.value
if (val == '' || val == '-1' || val == -1) {
if (res == '') {
res = fi;
bonk = input;
} else {
res += ', '+fi;
}
}
} else {
alert('Field with id='+fi+' not found!')
}
}
if (res == '') {
return submit_once();
} else {
alert('Missing value here ('+res+')!');
if (window.event && window.event.returnvalue) {
event.returnValue = 0; // work-around for IE
}
bonk.focus();
return false;
}
}
/**
* seeks the given value (2nd argument)
* in the value of the given input element (1st argument),
* which is considered a list of values, separated by commas
*/
function has_value(input, val)
{
var actval = input.value
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i remove_val()
*
* This will work nicely even for batched lists
*/
function append_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
if (actval == '') {
feld.value = val
} else {
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i append_val()
*/
function remove_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
var changed=false;
if (actval == '') {
return
} else {
var arr = feld.value.split(',');
var max = arr.length;
var neu = ''
for (i=0;iList of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-f2e6b303aa8a/share/roundup/templates/classic/html/user_utils.js 0000644 0000000 0000000 00000006001 11640641074 023716 0 ustar 0000000 0000000 // User Editing Utilities
/**
* for new users:
* Depending on the input field which calls it, takes the value
* and dispatches it to certain other input fields:
*
* address
* +-> username
* | `-> realname
* `-> organisation
*/
function split_name(that) {
var raw = that.value
var val = trim(raw)
if (val == '') {
return
}
var username=''
var realname=''
var address=''
switch (that.name) {
case 'address':
address=val
break
case 'username':
username=val
break
case 'realname':
realname=val
break
case 'firstname':
case 'lastname':
return
default:
alert('Ooops - unknown name field '+that.name+'!')
return
}
var the_form = that.form;
function field_empty(name) {
return the_form[name].value == ''
}
// no break statements - on purpose!
switch (that.name) {
case 'address':
var split1 = address.split('@')
if (field_empty('username')) {
username = split1[0]
the_form.username.value = username
}
if (field_empty('organisation')) {
the_form.organisation.value = default_organisation(split1[1])
}
case 'username':
if (field_empty('realname')) {
realname = Cap(username.split('.').join(' '))
the_form.realname.value = realname
}
case 'realname':
if (field_empty('username')) {
username = Cap(realname.replace(' ', '.'))
the_form.username.value = username
}
if (the_form.firstname && the_form.lastname) {
var split2 = realname.split(' ')
var firstname='', lastname=''
firstname = split2[0]
lastname = split2.slice(1).join(' ')
if (field_empty('firstname')) {
the_form.firstname.value = firstname
}
if (field_empty('lastname')) {
the_form.lastname.value = lastname
}
}
}
}
function SubCap(str) {
switch (str) {
case 'de': case 'do': case 'da':
case 'du': case 'von':
return str;
}
if (str.toLowerCase().slice(0,2) == 'mc') {
return 'Mc'+str.slice(2,3).toUpperCase()+str.slice(3).toLowerCase()
}
return str.slice(0,1).toUpperCase()+str.slice(1).toLowerCase()
}
function Cap(str) {
var liz = str.split(' ')
for (var i=0; i/db/files/]
# type = String() [MIME type of the content, default 'text/plain']
msg = FileClass(db, "msg",
author=Link("user", do_journal='no'),
recipients=Multilink("user", do_journal='no'),
date=Date(),
summary=String(),
files=Multilink("file"),
messageid=String(),
inreplyto=String())
file = FileClass(db, "file",
name=String())
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# nosy = Multilink("user")
# superseder = Multilink("issue")
issue = IssueClass(db, "issue",
assignedto=Link("user"),
keyword=Multilink("keyword"),
priority=Link("priority"),
status=Link("status"))
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
db.security.addPermissionToRole('User', 'Web Access')
db.security.addPermissionToRole('User', 'Email Access')
# Assign the access and edit Permissions for issue, file and message
# to regular users now
for cl in 'issue', 'file', 'msg', 'keyword':
db.security.addPermissionToRole('User', 'View', cl)
db.security.addPermissionToRole('User', 'Edit', cl)
db.security.addPermissionToRole('User', 'Create', cl)
for cl in 'priority', 'status':
db.security.addPermissionToRole('User', 'View', cl)
# May users view other user information? Comment these lines out
# if you don't want them to
db.security.addPermissionToRole('User', 'View', 'user')
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
properties=('username', 'password', 'address', 'realname', 'phone',
'organisation', 'alternate_addresses', 'queries', 'timezone'),
description="User is allowed to edit their own user details")
db.security.addPermissionToRole('User', p)
# Users should be able to edit and view their own queries. They should also
# be able to view any marked as not private. They should not be able to
# edit others' queries, even if they're not private
def view_query(db, userid, itemid):
private_for = db.query.get(itemid, 'private_for')
if not private_for: return True
return userid == private_for
def edit_query(db, userid, itemid):
return userid == db.query.get(itemid, 'creator')
p = db.security.addPermission(name='View', klass='query', check=view_query,
description="User is allowed to view their own and public queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Search', klass='query')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='query', check=edit_query,
description="User is allowed to edit their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Retire', klass='query', check=edit_query,
description="User is allowed to retire their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='query',
description="User is allowed to create queries")
db.security.addPermissionToRole('User', p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
# This is disabled by default to stop spam from auto-registering users on
# public trackers.
#db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's Anonymous
# Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Register', 'user')
# Allow anonymous users access to view issues (and the related, linked
# information)
for cl in 'issue', 'file', 'msg', 'keyword', 'priority', 'status':
db.security.addPermissionToRole('Anonymous', 'View', cl)
# [OPTIONAL]
# Allow anonymous users access to create or edit "issue" items (and the
# related file and message items)
#for cl in 'issue', 'file', 'msg':
# db.security.addPermissionToRole('Anonymous', 'Create', cl)
# db.security.addPermissionToRole('Anonymous', 'Edit', cl)
# vim: set filetype=python sts=4 sw=4 et si :
code-f2e6b303aa8a/share/roundup/templates/devel/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000505 11640641074 022404 0 ustar 0000000 0000000 Name: devel
Description: This is a generic issue tracker that may be used to track bugs,
feature requests, project issues or any number of other types
of issues. Most users of Roundup will find that this template
suits them, with perhaps a few customisations.
Intended-For: Developers
code-f2e6b303aa8a/share/roundup/templates/devel/config.ini 0000644 0000000 0000000 00000027062 11640641074 021654 0 ustar 0000000 0000000 # Roundup issue tracker configuration file
# Autogenerated at Fri Nov 17 16:59:49 2006
# WARNING! Following options need adjustments:
# [mail]: domain, host
# [tracker]: web
[main]
# Database directory path.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default: db
database = db
# Path to the HTML templates directory.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default: html
templates = html
# Path to directory holding additional static files
# available via Web UI. This directory may contain
# sitewide images, CSS stylesheets etc. and is searched
# for these files prior to the TEMPLATES directory
# specified above. If this option is not set, all static
# files are taken from the TEMPLATES directory
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
static_files =
# Email address that roundup will complain to if it runs into trouble.
# Default: roundup-admin
admin_email = roundup-admin
# The 'dispatcher' is a role that can get notified
# of new items to the database.
# It is used by the ERROR_MESSAGES_TO config setting.
# Default: roundup-admin
dispatcher_email = roundup-admin
# Additional text to include in the "name" part
# of the From: address used in nosy messages.
# If the sending user is "Foo Bar", the From: line
# is usually: "Foo Bar"
# the EMAIL_FROM_TAG goes inside the "Foo Bar" quotes like so:
# "Foo Bar EMAIL_FROM_TAG"
# Default:
email_from_tag =
# Roles that a user gets when they register with Web User Interface.
# This is a comma-separated string of role names (e.g. 'Admin,User').
# Default: User
new_web_user_roles = User
# Roles that a user gets when they register with Email Gateway.
# This is a comma-separated string of role names (e.g. 'Admin,User').
# Default: User
new_email_user_roles = User
# Send error message emails to the dispatcher, user, or both?
# The dispatcher is configured using the DISPATCHER_EMAIL setting.
# Default: user
error_messages_to = user
# HTML version to generate. The templates are html4 by default.
# If you wish to make them xhtml, then you'll need to change this
# var to 'xhtml' too so all auto-generated HTML is compliant.
# Allowed values: html4, xhtml
# Default: html4
html_version = xhtml
# Default timezone offset, applied when user's timezone is not set.
# If pytz module is installed, value may be any valid
# timezone specification (e.g. EET or Europe/Warsaw).
# If pytz is not installed, value must be integer number
# giving local timezone offset from UTC in hours.
# Default: UTC
timezone = UTC
# Register new users instantly, or require confirmation via
# email?
# Allowed values: yes, no
# Default: no
instant_registration = no
# Offer registration confirmation by email or only through the web?
# Allowed values: yes, no
# Default: yes
email_registration_confirmation = yes
# Additional stop-words for the full-text indexer specific to
# your tracker. See the indexer source for the default list of
# stop-words (eg. A,AND,ARE,AS,AT,BE,BUT,BY, ...)
# Allowed values: comma-separated list of words
# Default:
indexer_stopwords =
# Defines the file creation mode mask.
# Default: 02
umask = 02
[tracker]
# A descriptive name for your roundup instance.
# Default: Roundup issue tracker
name = Roundup tracker
# The web address that the tracker is viewable at.
# This will be included in information sent to users of the tracker.
# The URL MUST include the cgi-bin part or anything else
# that is required to get to the home page of the tracker.
# You MUST include a trailing '/' in the URL.
# Default: NO DEFAULT
web =
# Email address that mail to roundup should go to.
# Default: issue_tracker
email = issue_tracker
# Default locale name for this tracker.
# If this option is not set, the language is determined
# by OS environment variable LANGUAGE, LC_ALL, LC_MESSAGES,
# or LANG, in that order of preference.
# Default:
language =
[web]
# Whether to use HTTP Basic Authentication, if present.
# Roundup will use either the REMOTE_USER or HTTP_AUTHORIZATION
# variables supplied by your web server (in that order).
# Set this option to 'no' if you do not wish to use HTTP Basic
# Authentication in your web interface.
# Allowed values: yes, no
# Default: yes
http_auth = yes
# Whether to use HTTP Accept-Language, if present.
# Browsers send a language-region preference list.
# It's usually set in the client's browser or in their
# Operating System.
# Set this option to 'no' if you want to ignore it.
# Allowed values: yes, no
# Default: yes
use_browser_language = no
# Setting this option makes Roundup display error tracebacks
# in the user's browser rather than emailing them to the
# tracker admin.
# Allowed values: yes, no
# Default: no
debug = no
# Settings in this section are used by Postgresql and MySQL backends only
[rdbms]
# Name of the database to use.
# Default: roundup
name = roundup_roundup_tracker
# Database server host.
# Default: localhost
host = localhost
# TCP port number of the database server.
# Postgresql usually resides on port 5432 (if any),
# for MySQL default port number is 3306.
# Leave this option empty to use backend default
# Default:
port =
# Database user name that Roundup should use.
# Default: roundup
user = roundup
# Database user password.
# Default: roundup
password = roundup
# Name of the MySQL defaults file.
# Only used in MySQL connections.
# Default: ~/.my.cnf
read_default_file = ~/.my.cnf
# Name of the group to use in the MySQL defaults file (.my.cnf).
# Only used in MySQL connections.
# Default: roundup
read_default_group = roundup
[logging]
# Path to configuration file for standard Python logging module.
# If this option is set, logging configuration is loaded
# from specified file; options 'filename' and 'level'
# in this section are ignored.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
config =
# Log file name for minimal logging facility built into Roundup.
# If no file name specified, log messages are written on stderr.
# If above 'config' option is set, this option has no effect.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
filename =
# Minimal severity level of messages written to log file.
# If above 'config' option is set, this option has no effect.
# Allowed values: DEBUG, INFO, WARNING, ERROR
# Default: ERROR
level = ERROR
# Outgoing email options.
# Used for nozy messages and approval requests
[mail]
# Domain name used for email addresses.
# Default: NO DEFAULT
#domain = NO DEFAULT
domain = psf.upfronthosting.co.za
# SMTP mail host that roundup will use to send mail
# Default: NO DEFAULT
#host = NO DEFAULT
host = localhost
# SMTP login name.
# Set this if your mail host requires authenticated access.
# If username is not empty, password (below) MUST be set!
# Default:
username =
# SMTP login password.
# Set this if your mail host requires authenticated access.
# Default: NO DEFAULT
#password = NO DEFAULT
# If your SMTP mail host provides or requires TLS
# (Transport Layer Security) then set this option to 'yes'.
# Allowed values: yes, no
# Default: no
tls = no
# If TLS is used, you may set this option to the name
# of a PEM formatted file that contains your private key.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
tls_keyfile =
# If TLS is used, you may set this option to the name
# of a PEM formatted certificate chain file.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
tls_certfile =
# Character set to encode email headers with.
# We use utf-8 by default, as it's the most flexible.
# Some mail readers (eg. Eudora) can't cope with that,
# so you might need to specify a more limited character set
# (eg. iso-8859-1).
# Default: utf-8
charset = utf-8
# Setting this option makes Roundup to write all outgoing email
# messages to this file *instead* of sending them.
# This option has the same effect as environment variable SENDMAILDEBUG.
# Environment variable takes precedence.
# The path may be either absolute or relative
# to the directory containig this config file.
# Default:
#debug = /home/roundup/outgoing-mail
debug =
# Roundup Mail Gateway options
[mailgw]
# Keep email citations when accepting messages.
# Setting this to "no" strips out "quoted" text from the message.
# Signatures are also stripped.
# Allowed values: yes, no
# Default: yes
keep_quoted_text = yes
# Preserve the email body as is - that is,
# keep the citations _and_ signatures.
# Allowed values: yes, no
# Default: no
leave_body_unchanged = no
# Default class to use in the mailgw
# if one isn't supplied in email subjects.
# To disable, leave the value blank.
# Default: issue
default_class = issue
# Default locale name for the tracker mail gateway.
# If this option is not set, mail gateway will use
# the language of the tracker instance.
# Default:
language =
# Controls the parsing of the [prefix] on subject
# lines in incoming emails. "strict" will return an
# error to the sender if the [prefix] is not recognised.
# "loose" will attempt to parse the [prefix] but just
# pass it through as part of the issue title if not
# recognised. "none" will always pass any [prefix]
# through as part of the issue title.
# Default: strict
subject_prefix_parsing = strict
# Controls the parsing of the [suffix] on subject
# lines in incoming emails. "strict" will return an
# error to the sender if the [suffix] is not recognised.
# "loose" will attempt to parse the [suffix] but just
# pass it through as part of the issue title if not
# recognised. "none" will always pass any [suffix]
# through as part of the issue title.
# Default: strict
subject_suffix_parsing = strict
# Defines the brackets used for delimiting the prefix and
# suffix in a subject line. The presence of "suffix" in
# the config option name is a historical artifact and may
# be ignored.
# Default: []
subject_suffix_delimiters = []
# Controls matching of the incoming email subject line
# against issue titles in the case where there is no
# designator [prefix]. "never" turns off matching.
# "creation + interval" or "activity + interval"
# will match an issue for the interval after the issue's
# creation or last activity. The interval is a standard
# Roundup interval.
# Default: always
subject_content_match = always
# Nosy messages sending
[nosy]
# Send nosy messages to the author of the message.
# Allowed values: yes, no, new
# Default: no
messages_to_author = yes
# Where to place the email signature.
# Allowed values: top, bottom, none
# Default: bottom
signature_position = bottom
# Does the author of a message get placed on the nosy list
# automatically? If 'new' is used, then the author will
# only be added when a message creates a new issue.
# If 'yes', then the author will be added on followups too.
# If 'no', they're never added to the nosy.
#
# Allowed values: yes, no, new
# Default: new
add_author = yes
# Do the recipients (To:, Cc:) of a message get placed on the
# nosy list? If 'new' is used, then the recipients will
# only be added when a message creates a new issue.
# If 'yes', then the recipients will be added on followups too.
# If 'no', they're never added to the nosy.
#
# Allowed values: yes, no, new
# Default: new
add_recipients = new
# Controls the email sending from the nosy reactor. If
# "multiple" then a separate email is sent to each
# recipient. If "single" then a single email is sent with
# each recipient as a CC address.
# Default: single
email_sending = multiple
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/messagesummary.py 0000644 0000000 0000000 00000001145 11640641074 025310 0 ustar 0000000 0000000 #$Id: messagesummary.py,v 1.1 2009/02/01 22:23:25 stefan Exp $
from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if newvalues.has_key('summary') or not newvalues.has_key('content'):
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
#SHA: 538f90cb7f4eb63f77eca252b87afbe037d29c48
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/no_texthtml.py 0000644 0000000 0000000 00000000417 11640641074 024614 0 ustar 0000000 0000000
def audit_html_files(db, cl, nodeid, newvalues):
if newvalues.has_key('type') and newvalues['type'] == 'text/html':
newvalues['type'] = 'text/plain'
def init(db):
db.file.audit('set', audit_html_files)
db.file.audit('create', audit_html_files)
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/nosyreaction.py 0000644 0000000 0000000 00000011453 11640641074 024766 0 ustar 0000000 0000000 from roundup.anypy.sets_ import set
from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError, message:
raise roundupdb.DetectorError, message
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif oldvalues.has_key('messages'):
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if not m.has_key(msgid):
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if not newvalues.has_key('nosy'):
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if newvalues.has_key('nosy'):
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if newvalues.has_key('assignedto') and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if newvalues.has_key('messages'):
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.bug.react('create', nosyreaction)
db.bug.react('set', nosyreaction)
db.bug.audit('create', updatenosy)
db.bug.audit('set', updatenosy)
db.task.react('create', nosyreaction)
db.task.react('set', nosyreaction)
db.task.audit('create', updatenosy)
db.task.audit('set', updatenosy)
db.milestone.react('create', nosyreaction)
db.milestone.react('set', nosyreaction)
db.milestone.audit('create', updatenosy)
db.milestone.audit('set', updatenosy)
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/patches.py 0000644 0000000 0000000 00000002771 11640641074 023703 0 ustar 0000000 0000000 # Auditor for patch files
# Patches should be declared as text/plain (also .py files),
# independent of what the browser says, and
# the "patch" keyword should get set automatically.
import posixpath
patchtypes = ('.diff', '.patch')
sourcetypes = ('.diff', '.patch', '.py')
def ispatch(file, types):
return posixpath.splitext(file)[1] in types
def patches_text_plain(db, cl, nodeid, newvalues):
if ispatch(newvalues['name'], sourcetypes):
newvalues['type'] = 'text/plain'
def patches_keyword(db, cl, nodeid, newvalues):
# Check whether there are any new files
newfiles = set(newvalues.get('files',()))
if nodeid:
newfiles -= set(db.bug.get(nodeid, 'files'))
# Check whether any of these is a patch
newpatch = False
for fileid in newfiles:
if ispatch(db.file.get(fileid, 'name'), patchtypes):
newpatch = True
break
if newpatch:
# Add the patch keyword if its not already there
patchid = db.keyword.lookup("patch")
oldkeywords = []
if nodeid:
oldkeywords = db.bug.get(nodeid, 'keywords')
if patchid in oldkeywords:
# This is already marked as a patch
return
if not newvalues.has_key('keywords'):
newvalues['keywords'] = oldkeywords
newvalues['keywords'].append(patchid)
def init(db): pass
# db.file.audit('create', patches_text_plain)
# db.bug.audit('create', patches_keyword)
# db.bug.audit('set', patches_keyword)
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/severityauditor.py 0000644 0000000 0000000 00000000473 11640641074 025513 0 ustar 0000000 0000000
def init_severity(db, cl, nodeid, newvalues):
"""Make sure severity is set on new bugs"""
if newvalues.has_key('severity') and newvalues['severity']:
return
normal = db.severity.lookup('normal')
newvalues['severity'] = normal
def init(db): pass
#db.bug.audit('create', init_severity)
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/statusauditor.py 0000644 0000000 0000000 00000000513 11640641074 025157 0 ustar 0000000 0000000 def preset_new(db, cl, nodeid, newvalues):
""" Make sure the status is set on new bugs"""
if newvalues.has_key('status') and newvalues['status']:
return
new = db.status.lookup('new')
newvalues['status'] = new
def init(db): pass
# fire before changes are made
#db.bug.audit('create', preset_new)
code-f2e6b303aa8a/share/roundup/templates/devel/detectors/userauditor.py 0000644 0000000 0000000 00000005525 11640641074 024622 0 ustar 0000000 0000000 import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if user.has_key('address'):
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
'''
for address in get_addresses(newvalues):
if not valid_address(address):
print newvalues
raise ValueError, 'Email address syntax is invalid "%s"'%address
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError, 'Email address %s already in use' % address
for rolename in [r.lower().strip() for r in newvalues.get('roles', '').split(',')]:
if rolename and not db.security.role.has_key(rolename):
raise ValueError, 'Role "%s" does not exist'%rolename
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError, 'Timezone "%s" does not exist' % tz
except ValueError:
raise ValueError, 'Timezone "%s" exceeds valid range [-23...23]' % tz
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
code-f2e6b303aa8a/share/roundup/templates/devel/extensions/local_replace.py 0000644 0000000 0000000 00000003023 11640641074 025233 0 ustar 0000000 0000000 import re
substitutions = [ (re.compile('debian:\#(?P\d+)'),
'debian#\g' ),
(re.compile('\#(?P\s*)(?P\d+)'),
"#\g\g" ),
(re.compile('(?P\s+)revision(?P\s*)(?P\d+)'),
"\grevision\g\g"),
(re.compile('(?P\s+)rev(?P\s*)(?P\d+)'),
"\grev\g\g"),
(re.compile('(?P\s+)(?Pr|r\s+)(?P\d+)'),
"\g\g\g"),
]
def local_replace(message):
for cre, replacement in substitutions:
message = cre.sub(replacement, message)
return message
def init(instance):
instance.registerUtil('localReplace', local_replace)
if "__main__" == __name__:
print " debian:#222", local_replace(" debian:#222")
print " revision 222", local_replace(" revision 222")
print " wordthatendswithr 222", local_replace(" wordthatendswithr 222")
print " r222", local_replace(" r222")
print " r 222", local_replace(" r 222")
print " #555", local_replace(" #555")
code-f2e6b303aa8a/share/roundup/templates/devel/extensions/spambayes.py 0000644 0000000 0000000 00000005201 11640641074 024432 0 ustar 0000000 0000000 import re, math
from roundup.cgi.actions import Action
from roundup.cgi.exceptions import *
import xmlrpclib, socket
REVPAT = re.compile(r'(r[0-9]+\b|rev(ision)? [0-9]+\b)')
def extract_classinfo(db, classname, nodeid):
node = db.getnode(classname, nodeid)
authorage = node['creation'].timestamp() - \
db.getnode('user', node.get('author', node.get('creator')))['creation'].timestamp()
authorid = node.get('author', node.get('creator'))
content = db.getclass(classname).get(nodeid, 'content')
tokens = ["klass:%s" % classname,
"author:%s" % authorid,
"authorage:%d" % int(math.log(authorage)),
"hasrev:%s" % (REVPAT.search(content) is not None)]
return (content, tokens)
def train_spambayes(db, content, tokens, is_spam):
spambayes_uri = db.config.detectors['SPAMBAYES_URI']
server = xmlrpclib.ServerProxy(spambayes_uri, verbose=False)
try:
server.train({'content':content}, tokens, {}, is_spam)
return (True, None)
except (socket.error, xmlrpclib.Error), e:
return (False, str(e))
class SpambayesClassify(Action):
permissionType = 'SB: May Classify'
def handle(self):
(content, tokens) = extract_classinfo(self.db,
self.classname, self.nodeid)
if self.form.has_key("trainspam"):
is_spam = True
elif self.form.has_key("trainham"):
is_spam = False
(status, errmsg) = train_spambayes(self.db, content, tokens,
is_spam)
node = self.db.getnode(self.classname, self.nodeid)
props = {}
if status:
if node.get('spambayes_misclassified', False):
props['spambayes_misclassified'] = True
props['spambayes_score'] = 1.0
s = " SPAM"
if not is_spam:
props['spambayes_score'] = 0.0
s = " HAM"
self.client.ok_message.append(self._('Message classified as') + s)
else:
self.client.error_message.append(self._('Unable to classify message, got error:') + errmsg)
klass = self.db.getclass(self.classname)
klass.set(self.nodeid, **props)
self.db.commit()
def sb_is_spam(obj):
cutoff_score = float(obj._db.config.detectors['SPAMBAYES_SPAM_CUTOFF'])
try:
score = obj['spambayes_score']
except KeyError:
return False
return score >= cutoff_score
def init(instance):
instance.registerAction("spambayes_classify", SpambayesClassify)
instance.registerUtil('sb_is_spam', sb_is_spam)
code-f2e6b303aa8a/share/roundup/templates/devel/extensions/timestamp.py 0000644 0000000 0000000 00000001572 11640641074 024460 0 ustar 0000000 0000000 import time, struct, base64
from roundup.cgi.actions import RegisterAction
from roundup.cgi.exceptions import *
def timestamp():
return base64.encodestring(struct.pack("i", time.time())).strip()
def unpack_timestamp(s):
return struct.unpack("i",base64.decodestring(s))[0]
class Timestamped:
def check(self):
try:
created = unpack_timestamp(self.form['opaque'].value)
except KeyError:
raise FormError, "somebody tampered with the form"
if time.time() - created < 4:
raise FormError, "responding to the form too quickly"
return True
class TimestampedRegister(Timestamped, RegisterAction):
def permission(self):
self.check()
RegisterAction.permission(self)
def init(instance):
instance.registerUtil('timestamp', timestamp)
instance.registerAction('register', TimestampedRegister)
code-f2e6b303aa8a/share/roundup/templates/devel/extensions/timezone.py 0000644 0000000 0000000 00000001613 11640641074 024303 0 ustar 0000000 0000000 # Utility for replacing the simple input field for the timezone with
# a select-field that lists the available values.
import cgi
try:
import pytz
except ImportError:
pytz = None
def tzfield(prop, name, default):
if pytz:
value = prop.plain()
if '' == value:
value = default
else:
try:
value = "Etc/GMT%+d" % int(value)
except ValueError:
pass
l = ['')
return '\n'.join(l)
else:
return prop.field()
def init(instance):
instance.registerUtil('tzfield', tzfield)
code-f2e6b303aa8a/share/roundup/templates/devel/html/_generic.404.html 0000644 0000000 0000000 00000000253 11640641074 023612 0 ustar 0000000 0000000
Item Not Found
There is no with id
code-f2e6b303aa8a/share/roundup/templates/devel/html/_generic.calendar.html 0000644 0000000 0000000 00000001410 11640641074 025050 0 ustar 0000000 0000000
code-f2e6b303aa8a/share/roundup/templates/devel/html/_generic.collision.html 0000644 0000000 0000000 00000001367 11640641074 025305 0 ustar 0000000 0000000 <span tal:replace="python:context._classname.capitalize()"
i18n:name="class" /> Edit Collision - <span i18n:name="tracker"
tal:replace="config/TRACKER_NAME" /> Edit Collision
code-f2e6b303aa8a/share/roundup/templates/devel/html/_generic.help-empty.html 0000644 0000000 0000000 00000000261 11640641074 025366 0 ustar 0000000 0000000
Empty page (no search performed yet)
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column.
code-f2e6b303aa8a/share/roundup/templates/devel/html/help_controls.js 0000644 0000000 0000000 00000020364 11640641074 024061 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Topic and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
// either a checkbox object or an array of checkboxes
var check = document.frm_help.check;
if ((check.length == undefined) && (check.checked != undefined)) {
// only one checkbox on page
if (check.checked) {
list = check.value;
}
} else {
// array of checkboxes
for (box=0; box < check.length; box++) {
if (check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + check[box].value;
}
}
}
return list;
}
/**
* update the field in the opening window;
* the text_field variable must be set in the calling page
*/
function updateOpener() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = text_field.value;
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList_framed(form, textfield) {
// update the checkboxes based on the preview field
// alert('reviseList_framed')
// alert(form)
if (form.check==undefined)
return;
// alert(textfield)
var to_check;
var list = textfield.value.split(",");
if (form.check.length==undefined) {
check = form.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < form.check.length; box++) {
check = form.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
function checkRequiredFields(fields)
{
var bonk='';
var res='';
var argv = checkRequiredFields.arguments;
var argc = argv.length;
var input = '';
var val='';
for (var i=0; i < argc; i++) {
fi = argv[i];
input = document.getElementById(fi);
if (input) {
val = input.value
if (val == '' || val == '-1' || val == -1) {
if (res == '') {
res = fi;
bonk = input;
} else {
res += ', '+fi;
}
}
} else {
alert('Field with id='+fi+' not found!')
}
}
if (res == '') {
return submit_once();
} else {
alert('Missing value here ('+res+')!');
if (window.event && window.event.returnvalue) {
event.returnValue = 0; // work-around for IE
}
bonk.focus();
return false;
}
}
/**
* seeks the given value (2nd argument)
* in the value of the given input element (1st argument),
* which is considered a list of values, separated by commas
*/
function has_value(input, val)
{
var actval = input.value
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i remove_val()
*
* This will work nicely even for batched lists
*/
function append_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
if (actval == '') {
feld.value = val
} else {
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i append_val()
*/
function remove_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
var changed=false;
if (actval == '') {
return
} else {
var arr = feld.value.split(',');
var max = arr.length;
var neu = ''
for (i=0;iList of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
code-f2e6b303aa8a/share/roundup/templates/devel/html/home.html 0000644 0000000 0000000 00000000743 11640641074 022465 0 ustar 0000000 0000000
code-f2e6b303aa8a/share/roundup/templates/devel/html/jquery.js 0000644 0000000 0000000 00000353673 11640641074 022541 0 ustar 0000000 0000000 /*!
* jQuery JavaScript Library v1.3.2
* http://jquery.com/
*
* Copyright (c) 2009 John Resig
* Dual licensed under the MIT and GPL licenses.
* http://docs.jquery.com/License
*
* Date: 2009-02-19 17:34:21 -0500 (Thu, 19 Feb 2009)
* Revision: 6246
*/
(function(){
var
// Will speed up references to window, and allows munging its name.
window = this,
// Will speed up references to undefined, and allows munging its name.
undefined,
// Map over jQuery in case of overwrite
_jQuery = window.jQuery,
// Map over the $ in case of overwrite
_$ = window.$,
jQuery = window.jQuery = window.$ = function( selector, context ) {
// The jQuery object is actually just the init constructor 'enhanced'
return new jQuery.fn.init( selector, context );
},
// A simple way to check for HTML strings or ID strings
// (both of which we optimize for)
quickExpr = /^[^<]*(<(.|\s)+>)[^>]*$|^#([\w-]+)$/,
// Is it a simple selector
isSimple = /^.[^:#\[\.,]*$/;
jQuery.fn = jQuery.prototype = {
init: function( selector, context ) {
// Make sure that a selection was provided
selector = selector || document;
// Handle $(DOMElement)
if ( selector.nodeType ) {
this[0] = selector;
this.length = 1;
this.context = selector;
return this;
}
// Handle HTML strings
if ( typeof selector === "string" ) {
// Are we dealing with HTML string or an ID?
var match = quickExpr.exec( selector );
// Verify a match, and that no context was specified for #id
if ( match && (match[1] || !context) ) {
// HANDLE: $(html) -> $(array)
if ( match[1] )
selector = jQuery.clean( [ match[1] ], context );
// HANDLE: $("#id")
else {
var elem = document.getElementById( match[3] );
// Handle the case where IE and Opera return items
// by name instead of ID
if ( elem && elem.id != match[3] )
return jQuery().find( selector );
// Otherwise, we inject the element directly into the jQuery object
var ret = jQuery( elem || [] );
ret.context = document;
ret.selector = selector;
return ret;
}
// HANDLE: $(expr, [context])
// (which is just equivalent to: $(content).find(expr)
} else
return jQuery( context ).find( selector );
// HANDLE: $(function)
// Shortcut for document ready
} else if ( jQuery.isFunction( selector ) )
return jQuery( document ).ready( selector );
// Make sure that old selector state is passed along
if ( selector.selector && selector.context ) {
this.selector = selector.selector;
this.context = selector.context;
}
return this.setArray(jQuery.isArray( selector ) ?
selector :
jQuery.makeArray(selector));
},
// Start with an empty selector
selector: "",
// The current version of jQuery being used
jquery: "1.3.2",
// The number of elements contained in the matched element set
size: function() {
return this.length;
},
// Get the Nth element in the matched element set OR
// Get the whole matched element set as a clean array
get: function( num ) {
return num === undefined ?
// Return a 'clean' array
Array.prototype.slice.call( this ) :
// Return just the object
this[ num ];
},
// Take an array of elements and push it onto the stack
// (returning the new matched element set)
pushStack: function( elems, name, selector ) {
// Build a new jQuery matched element set
var ret = jQuery( elems );
// Add the old object onto the stack (as a reference)
ret.prevObject = this;
ret.context = this.context;
if ( name === "find" )
ret.selector = this.selector + (this.selector ? " " : "") + selector;
else if ( name )
ret.selector = this.selector + "." + name + "(" + selector + ")";
// Return the newly-formed element set
return ret;
},
// Force the current matched set of elements to become
// the specified array of elements (destroying the stack in the process)
// You should use pushStack() in order to do this, but maintain the stack
setArray: function( elems ) {
// Resetting the length to 0, then using the native Array push
// is a super-fast way to populate an object with array-like properties
this.length = 0;
Array.prototype.push.apply( this, elems );
return this;
},
// Execute a callback for every element in the matched set.
// (You can seed the arguments with an array of args, but this is
// only used internally.)
each: function( callback, args ) {
return jQuery.each( this, callback, args );
},
// Determine the position of an element within
// the matched set of elements
index: function( elem ) {
// Locate the position of the desired element
return jQuery.inArray(
// If it receives a jQuery object, the first element is used
elem && elem.jquery ? elem[0] : elem
, this );
},
attr: function( name, value, type ) {
var options = name;
// Look for the case where we're accessing a style value
if ( typeof name === "string" )
if ( value === undefined )
return this[0] && jQuery[ type || "attr" ]( this[0], name );
else {
options = {};
options[ name ] = value;
}
// Check to see if we're setting style values
return this.each(function(i){
// Set all the styles
for ( name in options )
jQuery.attr(
type ?
this.style :
this,
name, jQuery.prop( this, options[ name ], type, i, name )
);
});
},
css: function( key, value ) {
// ignore negative width and height values
if ( (key == 'width' || key == 'height') && parseFloat(value) < 0 )
value = undefined;
return this.attr( key, value, "curCSS" );
},
text: function( text ) {
if ( typeof text !== "object" && text != null )
return this.empty().append( (this[0] && this[0].ownerDocument || document).createTextNode( text ) );
var ret = "";
jQuery.each( text || this, function(){
jQuery.each( this.childNodes, function(){
if ( this.nodeType != 8 )
ret += this.nodeType != 1 ?
this.nodeValue :
jQuery.fn.text( [ this ] );
});
});
return ret;
},
wrapAll: function( html ) {
if ( this[0] ) {
// The elements to wrap the target around
var wrap = jQuery( html, this[0].ownerDocument ).clone();
if ( this[0].parentNode )
wrap.insertBefore( this[0] );
wrap.map(function(){
var elem = this;
while ( elem.firstChild )
elem = elem.firstChild;
return elem;
}).append(this);
}
return this;
},
wrapInner: function( html ) {
return this.each(function(){
jQuery( this ).contents().wrapAll( html );
});
},
wrap: function( html ) {
return this.each(function(){
jQuery( this ).wrapAll( html );
});
},
append: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.appendChild( elem );
});
},
prepend: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.insertBefore( elem, this.firstChild );
});
},
before: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this );
});
},
after: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this.nextSibling );
});
},
end: function() {
return this.prevObject || jQuery( [] );
},
// For internal use only.
// Behaves like an Array's method, not like a jQuery method.
push: [].push,
sort: [].sort,
splice: [].splice,
find: function( selector ) {
if ( this.length === 1 ) {
var ret = this.pushStack( [], "find", selector );
ret.length = 0;
jQuery.find( selector, this[0], ret );
return ret;
} else {
return this.pushStack( jQuery.unique(jQuery.map(this, function(elem){
return jQuery.find( selector, elem );
})), "find", selector );
}
},
clone: function( events ) {
// Do the clone
var ret = this.map(function(){
if ( !jQuery.support.noCloneEvent && !jQuery.isXMLDoc(this) ) {
// IE copies events bound via attachEvent when
// using cloneNode. Calling detachEvent on the
// clone will also remove the events from the orignal
// In order to get around this, we use innerHTML.
// Unfortunately, this means some modifications to
// attributes in IE that are actually only stored
// as properties will not be copied (such as the
// the name attribute on an input).
var html = this.outerHTML;
if ( !html ) {
var div = this.ownerDocument.createElement("div");
div.appendChild( this.cloneNode(true) );
html = div.innerHTML;
}
return jQuery.clean([html.replace(/ jQuery\d+="(?:\d+|null)"/g, "").replace(/^\s*/, "")])[0];
} else
return this.cloneNode(true);
});
// Copy the events from the original to the clone
if ( events === true ) {
var orig = this.find("*").andSelf(), i = 0;
ret.find("*").andSelf().each(function(){
if ( this.nodeName !== orig[i].nodeName )
return;
var events = jQuery.data( orig[i], "events" );
for ( var type in events ) {
for ( var handler in events[ type ] ) {
jQuery.event.add( this, type, events[ type ][ handler ], events[ type ][ handler ].data );
}
}
i++;
});
}
// Return the cloned set
return ret;
},
filter: function( selector ) {
return this.pushStack(
jQuery.isFunction( selector ) &&
jQuery.grep(this, function(elem, i){
return selector.call( elem, i );
}) ||
jQuery.multiFilter( selector, jQuery.grep(this, function(elem){
return elem.nodeType === 1;
}) ), "filter", selector );
},
closest: function( selector ) {
var pos = jQuery.expr.match.POS.test( selector ) ? jQuery(selector) : null,
closer = 0;
return this.map(function(){
var cur = this;
while ( cur && cur.ownerDocument ) {
if ( pos ? pos.index(cur) > -1 : jQuery(cur).is(selector) ) {
jQuery.data(cur, "closest", closer);
return cur;
}
cur = cur.parentNode;
closer++;
}
});
},
not: function( selector ) {
if ( typeof selector === "string" )
// test special case where just one selector is passed in
if ( isSimple.test( selector ) )
return this.pushStack( jQuery.multiFilter( selector, this, true ), "not", selector );
else
selector = jQuery.multiFilter( selector, this );
var isArrayLike = selector.length && selector[selector.length - 1] !== undefined && !selector.nodeType;
return this.filter(function() {
return isArrayLike ? jQuery.inArray( this, selector ) < 0 : this != selector;
});
},
add: function( selector ) {
return this.pushStack( jQuery.unique( jQuery.merge(
this.get(),
typeof selector === "string" ?
jQuery( selector ) :
jQuery.makeArray( selector )
)));
},
is: function( selector ) {
return !!selector && jQuery.multiFilter( selector, this ).length > 0;
},
hasClass: function( selector ) {
return !!selector && this.is( "." + selector );
},
val: function( value ) {
if ( value === undefined ) {
var elem = this[0];
if ( elem ) {
if( jQuery.nodeName( elem, 'option' ) )
return (elem.attributes.value || {}).specified ? elem.value : elem.text;
// We need to handle select boxes special
if ( jQuery.nodeName( elem, "select" ) ) {
var index = elem.selectedIndex,
values = [],
options = elem.options,
one = elem.type == "select-one";
// Nothing was selected
if ( index < 0 )
return null;
// Loop through all the selected options
for ( var i = one ? index : 0, max = one ? index + 1 : options.length; i < max; i++ ) {
var option = options[ i ];
if ( option.selected ) {
// Get the specifc value for the option
value = jQuery(option).val();
// We don't need an array for one selects
if ( one )
return value;
// Multi-Selects return an array
values.push( value );
}
}
return values;
}
// Everything else, we just grab the value
return (elem.value || "").replace(/\r/g, "");
}
return undefined;
}
if ( typeof value === "number" )
value += '';
return this.each(function(){
if ( this.nodeType != 1 )
return;
if ( jQuery.isArray(value) && /radio|checkbox/.test( this.type ) )
this.checked = (jQuery.inArray(this.value, value) >= 0 ||
jQuery.inArray(this.name, value) >= 0);
else if ( jQuery.nodeName( this, "select" ) ) {
var values = jQuery.makeArray(value);
jQuery( "option", this ).each(function(){
this.selected = (jQuery.inArray( this.value, values ) >= 0 ||
jQuery.inArray( this.text, values ) >= 0);
});
if ( !values.length )
this.selectedIndex = -1;
} else
this.value = value;
});
},
html: function( value ) {
return value === undefined ?
(this[0] ?
this[0].innerHTML.replace(/ jQuery\d+="(?:\d+|null)"/g, "") :
null) :
this.empty().append( value );
},
replaceWith: function( value ) {
return this.after( value ).remove();
},
eq: function( i ) {
return this.slice( i, +i + 1 );
},
slice: function() {
return this.pushStack( Array.prototype.slice.apply( this, arguments ),
"slice", Array.prototype.slice.call(arguments).join(",") );
},
map: function( callback ) {
return this.pushStack( jQuery.map(this, function(elem, i){
return callback.call( elem, i, elem );
}));
},
andSelf: function() {
return this.add( this.prevObject );
},
domManip: function( args, table, callback ) {
if ( this[0] ) {
var fragment = (this[0].ownerDocument || this[0]).createDocumentFragment(),
scripts = jQuery.clean( args, (this[0].ownerDocument || this[0]), fragment ),
first = fragment.firstChild;
if ( first )
for ( var i = 0, l = this.length; i < l; i++ )
callback.call( root(this[i], first), this.length > 1 || i > 0 ?
fragment.cloneNode(true) : fragment );
if ( scripts )
jQuery.each( scripts, evalScript );
}
return this;
function root( elem, cur ) {
return table && jQuery.nodeName(elem, "table") && jQuery.nodeName(cur, "tr") ?
(elem.getElementsByTagName("tbody")[0] ||
elem.appendChild(elem.ownerDocument.createElement("tbody"))) :
elem;
}
}
};
// Give the init function the jQuery prototype for later instantiation
jQuery.fn.init.prototype = jQuery.fn;
function evalScript( i, elem ) {
if ( elem.src )
jQuery.ajax({
url: elem.src,
async: false,
dataType: "script"
});
else
jQuery.globalEval( elem.text || elem.textContent || elem.innerHTML || "" );
if ( elem.parentNode )
elem.parentNode.removeChild( elem );
}
function now(){
return +new Date;
}
jQuery.extend = jQuery.fn.extend = function() {
// copy reference to target object
var target = arguments[0] || {}, i = 1, length = arguments.length, deep = false, options;
// Handle a deep copy situation
if ( typeof target === "boolean" ) {
deep = target;
target = arguments[1] || {};
// skip the boolean and the target
i = 2;
}
// Handle case when target is a string or something (possible in deep copy)
if ( typeof target !== "object" && !jQuery.isFunction(target) )
target = {};
// extend jQuery itself if only one argument is passed
if ( length == i ) {
target = this;
--i;
}
for ( ; i < length; i++ )
// Only deal with non-null/undefined values
if ( (options = arguments[ i ]) != null )
// Extend the base object
for ( var name in options ) {
var src = target[ name ], copy = options[ name ];
// Prevent never-ending loop
if ( target === copy )
continue;
// Recurse if we're merging object values
if ( deep && copy && typeof copy === "object" && !copy.nodeType )
target[ name ] = jQuery.extend( deep,
// Never move original objects, clone them
src || ( copy.length != null ? [ ] : { } )
, copy );
// Don't bring in undefined values
else if ( copy !== undefined )
target[ name ] = copy;
}
// Return the modified object
return target;
};
// exclude the following css properties to add px
var exclude = /z-?index|font-?weight|opacity|zoom|line-?height/i,
// cache defaultView
defaultView = document.defaultView || {},
toString = Object.prototype.toString;
jQuery.extend({
noConflict: function( deep ) {
window.$ = _$;
if ( deep )
window.jQuery = _jQuery;
return jQuery;
},
// See test/unit/core.js for details concerning isFunction.
// Since version 1.3, DOM methods and functions like alert
// aren't supported. They return false on IE (#2968).
isFunction: function( obj ) {
return toString.call(obj) === "[object Function]";
},
isArray: function( obj ) {
return toString.call(obj) === "[object Array]";
},
// check if an element is in a (or is an) XML document
isXMLDoc: function( elem ) {
return elem.nodeType === 9 && elem.documentElement.nodeName !== "HTML" ||
!!elem.ownerDocument && jQuery.isXMLDoc( elem.ownerDocument );
},
// Evalulates a script in a global context
globalEval: function( data ) {
if ( data && /\S/.test(data) ) {
// Inspired by code by Andrea Giammarchi
// http://webreflection.blogspot.com/2007/08/global-scope-evaluation-and-dom.html
var head = document.getElementsByTagName("head")[0] || document.documentElement,
script = document.createElement("script");
script.type = "text/javascript";
if ( jQuery.support.scriptEval )
script.appendChild( document.createTextNode( data ) );
else
script.text = data;
// Use insertBefore instead of appendChild to circumvent an IE6 bug.
// This arises when a base node is used (#2709).
head.insertBefore( script, head.firstChild );
head.removeChild( script );
}
},
nodeName: function( elem, name ) {
return elem.nodeName && elem.nodeName.toUpperCase() == name.toUpperCase();
},
// args is for internal usage only
each: function( object, callback, args ) {
var name, i = 0, length = object.length;
if ( args ) {
if ( length === undefined ) {
for ( name in object )
if ( callback.apply( object[ name ], args ) === false )
break;
} else
for ( ; i < length; )
if ( callback.apply( object[ i++ ], args ) === false )
break;
// A special, fast, case for the most common use of each
} else {
if ( length === undefined ) {
for ( name in object )
if ( callback.call( object[ name ], name, object[ name ] ) === false )
break;
} else
for ( var value = object[0];
i < length && callback.call( value, i, value ) !== false; value = object[++i] ){}
}
return object;
},
prop: function( elem, value, type, i, name ) {
// Handle executable functions
if ( jQuery.isFunction( value ) )
value = value.call( elem, i );
// Handle passing in a number to a CSS property
return typeof value === "number" && type == "curCSS" && !exclude.test( name ) ?
value + "px" :
value;
},
className: {
// internal only, use addClass("class")
add: function( elem, classNames ) {
jQuery.each((classNames || "").split(/\s+/), function(i, className){
if ( elem.nodeType == 1 && !jQuery.className.has( elem.className, className ) )
elem.className += (elem.className ? " " : "") + className;
});
},
// internal only, use removeClass("class")
remove: function( elem, classNames ) {
if (elem.nodeType == 1)
elem.className = classNames !== undefined ?
jQuery.grep(elem.className.split(/\s+/), function(className){
return !jQuery.className.has( classNames, className );
}).join(" ") :
"";
},
// internal only, use hasClass("class")
has: function( elem, className ) {
return elem && jQuery.inArray( className, (elem.className || elem).toString().split(/\s+/) ) > -1;
}
},
// A method for quickly swapping in/out CSS properties to get correct calculations
swap: function( elem, options, callback ) {
var old = {};
// Remember the old values, and insert the new ones
for ( var name in options ) {
old[ name ] = elem.style[ name ];
elem.style[ name ] = options[ name ];
}
callback.call( elem );
// Revert the old values
for ( var name in options )
elem.style[ name ] = old[ name ];
},
css: function( elem, name, force, extra ) {
if ( name == "width" || name == "height" ) {
var val, props = { position: "absolute", visibility: "hidden", display:"block" }, which = name == "width" ? [ "Left", "Right" ] : [ "Top", "Bottom" ];
function getWH() {
val = name == "width" ? elem.offsetWidth : elem.offsetHeight;
if ( extra === "border" )
return;
jQuery.each( which, function() {
if ( !extra )
val -= parseFloat(jQuery.curCSS( elem, "padding" + this, true)) || 0;
if ( extra === "margin" )
val += parseFloat(jQuery.curCSS( elem, "margin" + this, true)) || 0;
else
val -= parseFloat(jQuery.curCSS( elem, "border" + this + "Width", true)) || 0;
});
}
if ( elem.offsetWidth !== 0 )
getWH();
else
jQuery.swap( elem, props, getWH );
return Math.max(0, Math.round(val));
}
return jQuery.curCSS( elem, name, force );
},
curCSS: function( elem, name, force ) {
var ret, style = elem.style;
// We need to handle opacity special in IE
if ( name == "opacity" && !jQuery.support.opacity ) {
ret = jQuery.attr( style, "opacity" );
return ret == "" ?
"1" :
ret;
}
// Make sure we're using the right name for getting the float value
if ( name.match( /float/i ) )
name = styleFloat;
if ( !force && style && style[ name ] )
ret = style[ name ];
else if ( defaultView.getComputedStyle ) {
// Only "float" is needed here
if ( name.match( /float/i ) )
name = "float";
name = name.replace( /([A-Z])/g, "-$1" ).toLowerCase();
var computedStyle = defaultView.getComputedStyle( elem, null );
if ( computedStyle )
ret = computedStyle.getPropertyValue( name );
// We should always get a number back from opacity
if ( name == "opacity" && ret == "" )
ret = "1";
} else if ( elem.currentStyle ) {
var camelCase = name.replace(/\-(\w)/g, function(all, letter){
return letter.toUpperCase();
});
ret = elem.currentStyle[ name ] || elem.currentStyle[ camelCase ];
// From the awesome hack by Dean Edwards
// http://erik.eae.net/archives/2007/07/27/18.54.15/#comment-102291
// If we're not dealing with a regular pixel number
// but a number that has a weird ending, we need to convert it to pixels
if ( !/^\d+(px)?$/i.test( ret ) && /^\d/.test( ret ) ) {
// Remember the original values
var left = style.left, rsLeft = elem.runtimeStyle.left;
// Put in the new values to get a computed value out
elem.runtimeStyle.left = elem.currentStyle.left;
style.left = ret || 0;
ret = style.pixelLeft + "px";
// Revert the changed values
style.left = left;
elem.runtimeStyle.left = rsLeft;
}
}
return ret;
},
clean: function( elems, context, fragment ) {
context = context || document;
// !context.createElement fails in IE with an error but returns typeof 'object'
if ( typeof context.createElement === "undefined" )
context = context.ownerDocument || context[0] && context[0].ownerDocument || document;
// If a single string is passed in and it's a single tag
// just do a createElement and skip the rest
if ( !fragment && elems.length === 1 && typeof elems[0] === "string" ) {
var match = /^<(\w+)\s*\/?>$/.exec(elems[0]);
if ( match )
return [ context.createElement( match[1] ) ];
}
var ret = [], scripts = [], div = context.createElement("div");
jQuery.each(elems, function(i, elem){
if ( typeof elem === "number" )
elem += '';
if ( !elem )
return;
// Convert html string into DOM nodes
if ( typeof elem === "string" ) {
// Fix "XHTML"-style tags in all browsers
elem = elem.replace(/(<(\w+)[^>]*?)\/>/g, function(all, front, tag){
return tag.match(/^(abbr|br|col|img|input|link|meta|param|hr|area|embed)$/i) ?
all :
front + ">";
});
// Trim whitespace, otherwise indexOf won't work as expected
var tags = elem.replace(/^\s+/, "").substring(0, 10).toLowerCase();
var wrap =
// option or optgroup
!tags.indexOf("", "" ] ||
!tags.indexOf("", "" ] ||
tags.match(/^<(thead|tbody|tfoot|colg|cap)/) &&
[ 1, "
You are not allowed to view this page.
code-f2e6b303aa8a/share/roundup/templates/devel/html/msg.index.html 0000644 0000000 0000000 00000001651 11640641074 023430 0 ustar 0000000 0000000 List of messages - <span tal:replace="config/TRACKER_NAME"
i18n:name="tracker"/>Message listing
You have two options if you have forgotten your password.
If you know the email address you registered with, enter it below.
If your user was automatically created during
import from the old sourceforge tracker, your e-mail address is
<Sourceforge username>@users.sourceforge.net. The mail address
associated with your account can be changed after login.
A confirmation email will be sent to you -
please follow the instructions within it to complete the reset process.
g
code-f2e6b303aa8a/share/roundup/templates/devel/html/user.help-search.html 0000644 0000000 0000000 00000005660 11640641074 024710 0 ustar 0000000 0000000
Search input for user helper
code-f2e6b303aa8a/share/roundup/templates/devel/html/user.help.html 0000644 0000000 0000000 00000012417 11640641074 023443 0 ustar 0000000 0000000
code-f2e6b303aa8a/share/roundup/templates/devel/html/user.register.html 0000644 0000000 0000000 00000005723 11640641074 024341 0 ustar 0000000 0000000 Registering with <span i18n:name="tracker"
tal:replace="db/config/TRACKER_NAME" />Registering with
NOTE: If you have previously created or modified issue
reports using the sourceforge issue tracker previously used for python
bugs, your username on sourceforge already exists in this tracker. Use
the Password recovery form to
get a password for your account.
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-f2e6b303aa8a/share/roundup/templates/devel/html/user_utils.js 0000644 0000000 0000000 00000005700 11640641074 023401 0 ustar 0000000 0000000 // User Editing Utilities
/**
* for new users:
* Depending on the input field which calls it, takes the value
* and dispatches it to certain other input fields:
*
* address
* +-> username
* | `-> realname
* `-> organisation
*/
function split_name(that) {
var raw = that.value
var val = trim(raw)
if (val == '') {
return
}
var username=''
var realname=''
var address=''
switch (that.name) {
case 'address':
address=val
break
case 'username':
username=val
break
case 'realname':
realname=val
break
default:
alert('Ooops - unknown name field '+that.name+'!')
return
}
var the_form = that.form;
function field_empty(name) {
return the_form[name].value == ''
}
// no break statements - on purpose!
switch (that.name) {
case 'address':
var split1 = address.split('@')
if (field_empty('username')) {
username = split1[0]
the_form.username.value = username
}
if (field_empty('organisation')) {
the_form.organisation.value = default_organisation(split1[1])
}
case 'username':
if (field_empty('realname')) {
realname = Cap(username.split('.').join(' '))
the_form.realname.value = realname
}
case 'realname':
if (field_empty('username')) {
username = Cap(realname.replace(' ', '.'))
the_form.username.value = username
}
if (the_form.firstname && the_form.lastname) {
var split2 = realname.split(' ')
var firstname='', lastname=''
firstname = split2[0]
lastname = split2.slice(1).join(' ')
if (field_empty('firstname')) {
the_form.firstname.value = firstname
}
if (field_empty('lastname')) {
the_form.lastname.value = lastname
}
}
}
}
function SubCap(str) {
switch (str) {
case 'de': case 'do': case 'da':
case 'du': case 'von':
return str;
}
if (str.toLowerCase().slice(0,2) == 'mc') {
return 'Mc'+str.slice(2,3).toUpperCase()+str.slice(3).toLowerCase()
}
return str.slice(0,1).toUpperCase()+str.slice(1).toLowerCase()
}
function Cap(str) {
var liz = str.split(' ')
for (var i=0; i/db/files/]
# type = String() [MIME type of the content, default 'text/plain']
msg = FileClass(db, "msg",
author=Link("user", do_journal='no'),
recipients=Multilink("user", do_journal='no'),
date=Date(),
summary=String(),
files=Multilink("file"),
messageid=String(),
inreplyto=String(),
revision=Link("vcs_rev"))
# File
file = FileClass(db, "file",
name=String(),
description=String(indexme='yes'))
# Patch
patch = FileClass(db, "patch",
name=String(),
description=String(indexme='yes'),
repository=String(),
revision=String())
# Bug Type
bug_type = Class(db, 'bug_type',
name=String(),
description=String(),
order=Number())
bug_type.setkey('name')
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# patches = Multilink("patches")
# nosy = Multilink("user")
# superseder = Multilink("issue")
bug = IssueClass(db, "bug",
type=Link('bug_type'),
components=Multilink('component'),
versions=Multilink('version'),
severity=Link('severity'),
priority=Link('priority'),
dependencies=Multilink('bug'),
assignee=Link('user'),
status=Link('status'),
resolution=Link('resolution'),
superseder=Link('bug'),
keywords=Multilink('keyword'))
# Task Type
task_type = Class(db, 'task_type',
name=String(),
description=String(),
order=Number())
task_type.setkey('name')
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# nosy = Multilink("user")
# superseder = Multilink("issue")
task = IssueClass(db, "task",
type=Link('task_type'),
components=Multilink('component'),
priority=Link('priority'),
dependencies=Multilink('task'),
assignee=Multilink('user'),
status=Link('status'),
resolution=Link('resolution'),
solves=Link('bug'))
milestone = IssueClass(db, "milestone",
bugs=Multilink("bug"),
tasks=Multilink("task"),
status=Link("status"),
release_date=String())
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
db.security.addRole(name='Developer', description='A developer')
db.security.addRole(name='Coordinator', description='A coordinator')
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, 'Web Access')
db.security.addPermissionToRole(r, 'Email Access')
##########################
# User permissions
##########################
for cl in ('severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug_type', 'bug', 'task_type', 'task', 'milestone',
'keyword', 'file', 'msg'):
db.security.addPermissionToRole('User', 'View', cl)
db.security.addPermissionToRole('Anonymous', 'View', cl)
for cl in ('severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug_type', 'bug', 'file', 'msg'):
db.security.addPermissionToRole('User', 'Create', cl)
def may_edit_file(db, userid, itemid):
return userid == db.file.get(itemid, "creator")
p = db.security.addPermission(name='Edit', klass='file', check=may_edit_file,
description="User is allowed to remove their own files")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='bug',
properties=('title', 'bug_type',
'components', 'versions',
'severity',
'messages', 'files', 'nosy'),
description='User can report and discuss bugs')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='bug',
properties=('title', 'bug_type',
'components', 'versions',
'severity',
'messages', 'files', 'nosy'),
description='User can report and discuss bugs')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='task',
properties=('title', 'task_type',
'components',
'messages', 'files', 'nosy'),
description='Developer can create and discuss tasks')
db.security.addPermissionToRole('Developer', p)
p = db.security.addPermission(name='Edit', klass='task',
properties=('title', 'task_type',
'components',
'messages', 'files', 'nosy'),
description='Developer can create and discuss tasks')
db.security.addPermissionToRole('Developer', p)
p = db.security.addPermission(name='Create', klass='milestone',
description='Coordinator can create and discuss milestones')
db.security.addPermissionToRole('Coordinator', p)
p = db.security.addPermission(name='Edit', klass='milestone',
description='Coordinator can create and discuss milestones')
db.security.addPermissionToRole('Coordinator', p)
##########################
# Developer permissions
##########################
for cl in ('bug_type', 'severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug', 'file', 'msg', 'keyword'):
db.security.addPermissionToRole('Developer', 'View', cl)
for cl in ('bug', 'file', 'msg', 'keyword'):
db.security.addPermissionToRole('Developer', 'Edit', cl)
db.security.addPermissionToRole('Developer', 'Create', cl)
##########################
# Coordinator permissions
##########################
for cl in ('bug_type', 'task_type', 'severity', 'component',
'version', 'priority', 'status', 'resolution', 'bug', 'task', 'file', 'msg'):
db.security.addPermissionToRole('Coordinator', 'View', cl)
db.security.addPermissionToRole('Coordinator', 'Edit', cl)
db.security.addPermissionToRole('Coordinator', 'Create', cl)
# May users view other user information? Comment these lines out
# if you don't want them to
db.security.addPermissionToRole('User', 'View', 'user')
db.security.addPermissionToRole('Developer', 'View', 'user')
db.security.addPermissionToRole('Coordinator', 'View', 'user')
# Allow Coordinator to edit any user, including their roles.
db.security.addPermissionToRole('Coordinator', 'Edit', 'user')
db.security.addPermissionToRole('Coordinator', 'Web Roles')
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
description="User is allowed to edit their own user details",
properties=('username', 'password',
'address', 'realname',
'phone', 'organization',
'alternate_addresses',
'queries',
'timezone')) # Note: 'roles' excluded - users should not be able to edit their own roles.
for r in 'User', 'Developer':
db.security.addPermissionToRole(r, p)
# Users should be able to edit and view their own queries. They should also
# be able to view any marked as not private. They should not be able to
# edit others' queries, even if they're not private
def view_query(db, userid, itemid):
private_for = db.query.get(itemid, 'private_for')
if not private_for: return True
return userid == private_for
def edit_query(db, userid, itemid):
return userid == db.query.get(itemid, 'creator')
p = db.security.addPermission(name='View', klass='query', check=view_query,
description="User is allowed to view their own and public queries")
p = db.security.addPermission(name='Search', klass='query')
db.security.addPermissionToRole('User', p)
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Edit', klass='query', check=edit_query,
description="User is allowed to edit their queries")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Create', klass='query',
description="User is allowed to create queries")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
# This is disabled by default to stop spam from auto-registering users on
# public trackers.
#db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's Anonymous
# Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Create', 'user')
# Allow anonymous users access to view issues (and the related, linked
# information).
for cl in 'bug', 'severity', 'status', 'resolution', 'msg', 'file':
db.security.addPermissionToRole('Anonymous', 'View', cl)
# [OPTIONAL]
# Allow anonymous users access to create or edit "issue" items (and the
# related file and message items)
#for cl in 'issue', 'file', 'msg':
# db.security.addPermissionToRole('Anonymous', 'Create', cl)
# db.security.addPermissionToRole('Anonymous', 'Edit', cl)
# vim: set filetype=python sts=4 sw=4 et si :
code-f2e6b303aa8a/share/roundup/templates/minimal/.cvsignore 0000644 0000000 0000000 00000000040 11640641074 022220 0 ustar 0000000 0000000 *.pyc
*.pyo
htmlbase.py
*.cover
code-f2e6b303aa8a/share/roundup/templates/minimal/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000710 11640641074 022731 0 ustar 0000000 0000000 Name: minimal
Description: This is an empty tracker - it must be customised for it to be
useful! It only defines the bare minimum of information - the
user database and the two default users (admin and anonymous).
The rest is entirely up to you! Not recommended for first-time
Roundup users (it's easier to tweak the Classic tracker).
Intended-For: Roundup experts who need a clean slate to start with.
code-f2e6b303aa8a/share/roundup/templates/minimal/detectors/.cvsignore 0000644 0000000 0000000 00000000024 11640641074 024216 0 ustar 0000000 0000000 *.pyc
*.pyo
*.cover
code-f2e6b303aa8a/share/roundup/templates/minimal/detectors/userauditor.py 0000644 0000000 0000000 00000007747 11640641074 025161 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
#$Id: userauditor.py,v 1.8 2007-09-12 21:11:14 jpend Exp $
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if user.has_key('address'):
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
'''
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError, 'Email address syntax is invalid'
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError, 'Email address %s already in use' % address
for rolename in [r.lower().strip() for r in newvalues.get('roles', '').split(',')]:
if rolename and not db.security.role.has_key(rolename):
raise ValueError, 'Role "%s" does not exist'%rolename
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError, 'Timezone "%s" does not exist' % tz
except ValueError:
raise ValueError, 'Timezone "%s" exceeds valid range [-23...23]' % tz
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-f2e6b303aa8a/share/roundup/templates/minimal/extensions/README.txt 0000644 0000000 0000000 00000000201 11640641074 024114 0 ustar 0000000 0000000 This directory is for tracker extensions:
- CGI Actions
- Templating functions
See the customisation doc for more information.
code-f2e6b303aa8a/share/roundup/templates/minimal/html/_generic.404.html 0000644 0000000 0000000 00000000253 11640641074 024141 0 ustar 0000000 0000000
Item Not Found
There is no with id
code-f2e6b303aa8a/share/roundup/templates/minimal/html/_generic.calendar.html 0000644 0000000 0000000 00000001411 11640641074 025400 0 ustar 0000000 0000000
code-f2e6b303aa8a/share/roundup/templates/minimal/html/_generic.collision.html 0000644 0000000 0000000 00000001367 11640641074 025634 0 ustar 0000000 0000000 <span tal:replace="python:context._classname.capitalize()"
i18n:name="class" /> Edit Collision - <span i18n:name="tracker"
tal:replace="config/TRACKER_NAME" /> Edit Collision
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column. If you wish to restore a
removed item and you know its id then just put that id in the id column.
Showing 10 items.
Show all history
(warning: this could be VERY long)
code-f2e6b303aa8a/share/roundup/templates/minimal/html/help_controls.js 0000644 0000000 0000000 00000006037 11640641074 024411 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Keyword and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
for (box=0; box < document.frm_help.check.length; box++) {
if (document.frm_help.check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + document.frm_help.check[box].value;
}
}
return list;
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
code-f2e6b303aa8a/share/roundup/templates/minimal/html/home.classlist.html 0000644 0000000 0000000 00000001404 11640641074 025007 0 ustar 0000000 0000000 List of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-f2e6b303aa8a/share/roundup/templates/minimal/initial_data.py 0000644 0000000 0000000 00000000626 11640641074 023226 0 ustar 0000000 0000000 #
# TRACKER DATABASE INITIALIZATION
#
# create the two default users
user = db.getclass('user')
user.create(username="admin", password=adminpw,
address=admin_email, roles='Admin')
user.create(username="anonymous", roles='Anonymous')
# add any additional database creation steps here - but only if you
# haven't initialised the database with the admin "initialise" command
# vim: set et sts=4 sw=4 :
code-f2e6b303aa8a/share/roundup/templates/minimal/schema.py 0000644 0000000 0000000 00000004671 11640641074 022050 0 ustar 0000000 0000000 #
# TRACKER SCHEMA
#
# Class automatically gets these properties:
# creation = Date()
# activity = Date()
# creator = Link('user')
# actor = Link('user')
# The "Minimal" template gets only one class, the required "user"
# class. That's it. And even that has the bare minimum of properties.
# Note: roles is a comma-separated string of Role names
user = Class(db, "user", username=String(), password=Password(),
address=String(), alternate_addresses=String(), roles=String())
user.setkey("username")
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
db.security.addPermissionToRole('User', 'Web Access')
db.security.addPermissionToRole('User', 'Email Access')
# May users view other user information?
# Comment these lines out if you don't want them to
db.security.addPermissionToRole('User', 'View', 'user')
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
properties=('username', 'password', 'address', 'alternate_addresses'),
description="User is allowed to edit their own user details")
db.security.addPermissionToRole('User', p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's
# Anonymous Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Register', 'user')
# vim: set et sts=4 sw=4 :