code-f282940c1f41/roundup/scripts/.cvsignore0000644000000000000000000000002407503776574016774 0ustar 00000000000000*.pyc *.pyo *.cover code-f282940c1f41/roundup/scripts/__init__.py0000644000000000000000000000211607503776574017111 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.1 2002-01-29 20:07:15 jhermann Exp $ __doc__ = ''' Subpackage containing the modules that implement the command line tools. Note that these are imported by script stubs generated by "setup.py". ''' code-f282940c1f41/roundup/scripts/roundup_admin.py0000644000000000000000000003156107503776574020224 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_admin.py,v 1.3 2002-03-14 23:59:24 richard Exp $ # python version check from roundup import version_check # import the admin tool guts and make it go from roundup.admin import AdminTool from roundup.i18n import _ import sys def run(): tool = AdminTool() sys.exit(tool.main()) if __name__ == '__main__': run() # # $Log: not supported by cvs2svn $ # Revision 1.2 2002/01/29 20:07:15 jhermann # Conversion to generated script stubs # # Revision 1.1 2002/01/29 19:53:08 jhermann # Moved scripts from top-level dir to roundup.scripts subpackage # # Revision 1.61 2002/01/05 02:21:21 richard # fixes # # Revision 1.60 2002/01/05 02:11:22 richard # I18N'ed roundup admin - and split the code off into a module so it can be used # elsewhere. # Big issue with this is the doc strings - that's the help. We're probably going to # have to switch to not use docstrings, which will suck a little :( # # Revision 1.59 2001/12/31 05:20:34 richard # . #496360 ] table width does not work # # Revision 1.58 2001/12/31 05:12:52 richard # actually handle the advertised response to "commit y/N?" # # Revision 1.57 2001/12/31 05:12:01 richard # added some quoting instructions to roundup-admin # # Revision 1.56 2001/12/31 05:09:20 richard # Added better tokenising to roundup-admin - handles spaces and stuff. Can # use quoting or backslashes. See the roundup.token pydoc. # # Revision 1.55 2001/12/17 03:52:47 richard # Implemented file store rollback. As a bonus, the hyperdb is now capable of # storing more than one file per node - if a property name is supplied, # the file is called designator.property. # I decided not to migrate the existing files stored over to the new naming # scheme - the FileClass just doesn't specify the property name. # # Revision 1.54 2001/12/15 23:09:23 richard # Some cleanups in roundup-admin, also made it work again... # # Revision 1.53 2001/12/13 00:20:00 richard # . Centralised the python version check code, bumped version to 2.1.1 (really # needs to be 2.1.2, but that isn't released yet :) # # Revision 1.52 2001/12/12 21:47:45 richard # . Message author's name appears in From: instead of roundup instance name # (which still appears in the Reply-To:) # . envelope-from is now set to the roundup-admin and not roundup itself so # delivery reports aren't sent to roundup (thanks Patrick Ohly) # # Revision 1.51 2001/12/10 00:57:38 richard # From CHANGES: # . Added the "display" command to the admin tool - displays a node's values # . #489760 ] [issue] only subject # . fixed the doc/index.html to include the quoting in the mail alias. # # Also: # . fixed roundup-admin so it works with transactions # . disabled the back_anydbm module if anydbm tries to use dumbdbm # # Revision 1.50 2001/12/02 05:06:16 richard # . We now use weakrefs in the Classes to keep the database reference, so # the close() method on the database is no longer needed. # I bumped the minimum python requirement up to 2.1 accordingly. # . #487480 ] roundup-server # . #487476 ] INSTALL.txt # # I also cleaned up the change message / post-edit stuff in the cgi client. # There's now a clearly marked "TODO: append the change note" where I believe # the change note should be added there. The "changes" list will obviously # have to be modified to be a dict of the changes, or somesuch. # # More testing needed. # # Revision 1.49 2001/12/01 07:17:50 richard # . We now have basic transaction support! Information is only written to # the database when the commit() method is called. Only the anydbm # backend is modified in this way - neither of the bsddb backends have been. # The mail, admin and cgi interfaces all use commit (except the admin tool # doesn't have a commit command, so interactive users can't commit...) # . Fixed login/registration forwarding the user to the right page (or not, # on a failure) # # Revision 1.48 2001/11/27 22:32:03 richard # typo # # Revision 1.47 2001/11/26 22:55:56 richard # Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # # Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # # Revision 1.46 2001/11/21 03:40:54 richard # more new property handling # # Revision 1.45 2001/11/12 22:51:59 jhermann # Fixed option & associated error handling # # Revision 1.44 2001/11/12 22:01:06 richard # Fixed issues with nosy reaction and author copies. # # Revision 1.43 2001/11/09 22:33:28 richard # More error handling fixes. # # Revision 1.42 2001/11/09 10:11:08 richard # . roundup-admin now handles all hyperdb exceptions # # Revision 1.41 2001/11/09 01:25:40 richard # Should parse with python 1.5.2 now. # # Revision 1.40 2001/11/08 04:42:00 richard # Expanded the already-abbreviated "initialise" and "specification" commands, # and added a comment to the command help about the abbreviation. # # Revision 1.39 2001/11/08 04:29:59 richard # roundup-admin now accepts abbreviated commands (eg. l = li = lis = list) # [thanks Engelbert Gruber for the inspiration] # # Revision 1.38 2001/11/05 23:45:40 richard # Fixed newuser_action so it sets the cookie with the unencrypted password. # Also made it present nicer error messages (not tracebacks). # # Revision 1.37 2001/10/23 01:00:18 richard # Re-enabled login and registration access after lopping them off via # disabling access for anonymous users. # Major re-org of the htmltemplate code, cleaning it up significantly. Fixed # a couple of bugs while I was there. Probably introduced a couple, but # things seem to work OK at the moment. # # Revision 1.36 2001/10/21 00:45:15 richard # Added author identification to e-mail messages from roundup. # # Revision 1.35 2001/10/20 11:58:48 richard # Catch errors in login - no username or password supplied. # Fixed editing of password (Password property type) thanks Roch'e Compaan. # # Revision 1.34 2001/10/18 02:16:42 richard # Oops, committed the admin script with the wierd #! line. # Also, made the thing into a class to reduce parameter passing. # Nuked the leading whitespace from the help __doc__ displays too. # # Revision 1.33 2001/10/17 23:13:19 richard # Did a fair bit of work on the admin tool. Now has an extra command "table" # which displays node information in a tabular format. Also fixed import and # export so they work. Removed freshen. # Fixed quopri usage in mailgw from bug reports. # # Revision 1.32 2001/10/17 06:57:29 richard # Interactive startup blurb - need to figure how to get the version in there. # # Revision 1.31 2001/10/17 06:17:26 richard # Now with readline support :) # # Revision 1.30 2001/10/17 06:04:00 richard # Beginnings of an interactive mode for roundup-admin # # Revision 1.29 2001/10/16 03:48:01 richard # admin tool now complains if a "find" is attempted with a non-link property. # # Revision 1.28 2001/10/13 00:07:39 richard # More help in admin tool. # # Revision 1.27 2001/10/11 23:43:04 richard # Implemented the comma-separated printing option in the admin tool. # Fixed a typo (more of a vim-o actually :) in mailgw. # # Revision 1.26 2001/10/11 05:03:51 richard # Marked the roundup-admin import/export as experimental since they're not fully # operational. # # Revision 1.25 2001/10/10 04:12:32 richard # The setup.cfg file is just causing pain. Away it goes. # # Revision 1.24 2001/10/10 03:54:57 richard # Added database importing and exporting through CSV files. # Uses the csv module from object-craft for exporting if it's available. # Requires the csv module for importing. # # Revision 1.23 2001/10/09 23:36:25 richard # Spit out command help if roundup-admin command doesn't get an argument. # # Revision 1.22 2001/10/09 07:25:59 richard # Added the Password property type. See "pydoc roundup.password" for # implementation details. Have updated some of the documentation too. # # Revision 1.21 2001/10/05 02:23:24 richard # . roundup-admin create now prompts for property info if none is supplied # on the command-line. # . hyperdb Class getprops() method may now return only the mutable # properties. # . Login now uses cookies, which makes it a whole lot more flexible. We can # now support anonymous user access (read-only, unless there's an # "anonymous" user, in which case write access is permitted). Login # handling has been moved into cgi_client.Client.main() # . The "extended" schema is now the default in roundup init. # . The schemas have had their page headings modified to cope with the new # login handling. Existing installations should copy the interfaces.py # file from the roundup lib directory to their instance home. # . Incorrectly had a Bizar Software copyright on the cgitb.py module from # Ping - has been removed. # . Fixed a whole bunch of places in the CGI interface where we should have # been returning Not Found instead of throwing an exception. # . Fixed a deviation from the spec: trying to modify the 'id' property of # an item now throws an exception. # # Revision 1.20 2001/10/04 02:12:42 richard # Added nicer command-line item adding: passing no arguments will enter an # interactive more which asks for each property in turn. While I was at it, I # fixed an implementation problem WRT the spec - I wasn't raising a # ValueError if the key property was missing from a create(). Also added a # protected=boolean argument to getprops() so we can list only the mutable # properties (defaults to yes, which lists the immutables). # # Revision 1.19 2001/10/01 06:40:43 richard # made do_get have the args in the correct order # # Revision 1.18 2001/09/18 22:58:37 richard # # Added some more help to roundu-admin # # Revision 1.17 2001/08/28 05:58:33 anthonybaxter # added missing 'import' statements. # # Revision 1.16 2001/08/12 06:32:36 richard # using isinstance(blah, Foo) now instead of isFooType # # Revision 1.15 2001/08/07 00:24:42 richard # stupid typo # # Revision 1.14 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.13 2001/08/05 07:44:13 richard # Instances are now opened by a special function that generates a unique # module name for the instances on import time. # # Revision 1.12 2001/08/03 01:28:33 richard # Used the much nicer load_package, pointed out by Steve Majewski. # # Revision 1.11 2001/08/03 00:59:34 richard # Instance import now imports the instance using imp.load_module so that # we can have instance homes of "roundup" or other existing python package # names. # # Revision 1.10 2001/07/30 08:12:17 richard # Added time logging and file uploading to the templates. # # Revision 1.9 2001/07/30 03:52:55 richard # init help now lists templates and backends # # Revision 1.8 2001/07/30 02:37:07 richard # Freshen is really broken. Commented out. # # Revision 1.7 2001/07/30 01:28:46 richard # Bugfixes # # Revision 1.6 2001/07/30 00:57:51 richard # Now uses getopt, much improved command-line parsing. Much fuller help. Much # better internal structure. It's just BETTER. :) # # Revision 1.5 2001/07/30 00:04:48 richard # Made the "init" prompting more friendly. # # Revision 1.4 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.3 2001/07/23 08:45:28 richard # ok, so now "./roundup-admin init" will ask questions in an attempt to get a # workable instance_home set up :) # _and_ anydbm has had its first test :) # # Revision 1.2 2001/07/23 08:20:44 richard # Moved over to using marshal in the bsddb and anydbm backends. # roundup-admin now has a "freshen" command that'll load/save all nodes (not # retired - mod hyperdb.Class.list() so it lists retired nodes) # # Revision 1.1 2001/07/23 03:46:48 richard # moving the bin files to facilitate out-of-the-boxness # # Revision 1.1 2001/07/22 11:15:45 richard # More Grande Splite stuff # # # vim: set filetype=python ts=4 sw=4 et si code-f282940c1f41/roundup/scripts/roundup_mailgw.py0000644000000000000000000002260407503776574020412 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_mailgw.py,v 1.3 2002-03-14 23:59:24 richard Exp $ # python version check from roundup import version_check import sys, os, re, cStringIO from roundup.mailgw import Message from roundup.i18n import _ def do_pipe(handler): '''Read a message from standard input and pass it to the mail handler. ''' handler.main(sys.stdin) return 0 def do_mailbox(handler, filename): '''Read a series of messages from the specified unix mailbox file and pass each to the mail handler. ''' # open the spool file and lock it import fcntl, FCNTL f = open(filename, 'r+') fcntl.flock(f.fileno(), FCNTL.LOCK_EX) # handle and clear the mailbox try: from mailbox import UnixMailbox mailbox = UnixMailbox(f, factory=Message) # grab one message message = mailbox.next() while message: # call the instance mail handler handler.handle_Message(message) message = mailbox.next() # nuke the file contents os.ftruncate(f.fileno(), 0) except: import traceback traceback.print_exc() return 1 fcntl.flock(f.fileno(), FCNTL.LOCK_UN) return 0 def do_pop(handler, server, user='', password=''): '''Read a series of messages from the specified POP server. ''' import getpass, poplib, socket try: if not user: user = raw_input(_('User: ')) if not password: password = getpass.getpass() except (KeyboardInterrupt, EOFError): # Ctrl C or D maybe also Ctrl Z under Windows. print "\nAborted by user." return 1 # open a connection to the server and retrieve all messages try: server = poplib.POP3(server) except socket.error, message: print "POP server error:", message return 1 server.user(user) server.pass_(password) numMessages = len(server.list()[1]) for i in range(1, numMessages+1): # retr: returns # [ pop response e.g. '+OK 459 octets', # [ array of message lines ], # number of octets ] lines = server.retr(i)[1] s = cStringIO.StringIO('\n'.join(lines)) s.seek(0) handler.handle_Message(Message(s)) # delete the message server.dele(i) # quit the server to commit changes. server.quit() return 0 def usage(args, message=None): if message is not None: print message print _('Usage: %(program)s [source spec]')%{'program': args[0]} print _(''' The roundup mail gateway may be called in one of two ways: . with an instance home as the only argument, . with both an instance home and a mail spool file, or . with both an instance home and a pop server account. PIPE: In the first case, the mail gateway reads a single message from the standard input and submits the message to the roundup.mailgw module. UNIX mailbox: In the second case, the gateway reads all messages from the mail spool file and submits each in turn to the roundup.mailgw module. The file is emptied once all messages have been successfully handled. The file is specified as: mailbox /path/to/mailbox POP: In the third case, the gateway reads all messages from the POP server specified and submits each in turn to the roundup.mailgw module. The server is specified as: pop username:password@server The username and password may be omitted: pop username@server pop server are both valid. The username and/or password will be prompted for if not supplied on the command-line. ''') return 1 def main(args): '''Handle the arguments to the program and initialise environment. ''' # figure the instance home if len(args) > 1: instance_home = args[1] else: instance_home = os.environ.get('ROUNDUP_INSTANCE', '') if not instance_home: return usage(args) # get the instance import roundup.instance instance = roundup.instance.open(instance_home) # get a mail handler db = instance.open('admin') handler = instance.MailGW(instance, db) # if there's no more arguments, read a single message from stdin if len(args) == 2: return do_pipe(handler) # otherwise, figure what sort of mail source to handle if len(args) < 4: return usage(args, _('Error: not enough source specification information')) source, specification = args[2:] if source == 'mailbox': return do_mailbox(handler, specification) elif source == 'pop': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: return do_pop(handler, m.group('server'), m.group('user'), m.group('pass')) return usage(args, _('Error: pop specification not valid')) return usage(args, _('Error: The source must be either "mailbox" or "pop"')) def run(): sys.exit(main(sys.argv)) # call main if __name__ == '__main__': run() # # $Log: not supported by cvs2svn $ # Revision 1.2 2002/01/29 20:07:15 jhermann # Conversion to generated script stubs # # Revision 1.1 2002/01/29 19:53:08 jhermann # Moved scripts from top-level dir to roundup.scripts subpackage # # Revision 1.21 2002/01/11 07:02:29 grubert # put an exception around: do_pop user and password entry to catch ctrl-c/d. # # Revision 1.20 2002/01/07 10:43:48 richard # #500329 ] exception on server not reachable-patch # # Revision 1.19 2002/01/05 02:19:03 richard # i18n'ification # # Revision 1.18 2001/12/13 00:20:01 richard # . Centralised the python version check code, bumped version to 2.1.1 (really # needs to be 2.1.2, but that isn't released yet :) # # Revision 1.17 2001/12/02 05:06:16 richard # . We now use weakrefs in the Classes to keep the database reference, so # the close() method on the database is no longer needed. # I bumped the minimum python requirement up to 2.1 accordingly. # . #487480 ] roundup-server # . #487476 ] INSTALL.txt # # I also cleaned up the change message / post-edit stuff in the cgi client. # There's now a clearly marked "TODO: append the change note" where I believe # the change note should be added there. The "changes" list will obviously # have to be modified to be a dict of the changes, or somesuch. # # More testing needed. # # Revision 1.16 2001/11/30 18:23:55 jhermann # Cleaned up strange import (less pollution, too) # # Revision 1.15 2001/11/30 13:16:37 rochecompaan # Fixed bug. Mail gateway was not using the extended Message class # resulting in failed submissions when mails were processed from a Unix # mailbox # # Revision 1.14 2001/11/13 21:44:44 richard # . re-open the database as the author in mail handling # # Revision 1.13 2001/11/09 01:05:55 richard # Fixed bug #479511 ] mailgw to pop once engelbert gruber tested the POP # gateway. # # Revision 1.12 2001/11/08 05:16:55 richard # Rolled roundup-popgw into roundup-mailgw. Cleaned mailgw up significantly, # tested unix mailbox some more. POP still untested. # # Revision 1.11 2001/11/07 05:32:58 richard # More roundup-mailgw usage help. # # Revision 1.10 2001/11/07 05:30:11 richard # Nicer usage message. # # Revision 1.9 2001/11/07 05:29:26 richard # Modified roundup-mailgw so it can read e-mails from a local mail spool # file. Truncates the spool file after parsing. # Fixed a couple of small bugs introduced in roundup.mailgw when I started # the popgw. # # Revision 1.8 2001/11/01 22:04:37 richard # Started work on supporting a pop3-fetching server # Fixed bugs: # . bug #477104 ] HTML tag error in roundup-server # . bug #477107 ] HTTP header problem # # Revision 1.7 2001/08/07 00:24:42 richard # stupid typo # # Revision 1.6 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.5 2001/08/05 07:44:25 richard # Instances are now opened by a special function that generates a unique # module name for the instances on import time. # # Revision 1.4 2001/08/03 01:28:33 richard # Used the much nicer load_package, pointed out by Steve Majewski. # # Revision 1.3 2001/08/03 00:59:34 richard # Instance import now imports the instance using imp.load_module so that # we can have instance homes of "roundup" or other existing python package # names. # # Revision 1.2 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.1 2001/07/23 03:46:48 richard # moving the bin files to facilitate out-of-the-boxness # # Revision 1.1 2001/07/22 11:15:45 richard # More Grande Splite stuff # # # vim: set filetype=python ts=4 sw=4 et si code-f282940c1f41/roundup/scripts/roundup_server.py0000644000000000000000000003340307503776574020437 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # """ HTTP Server that serves roundup. $Id: roundup_server.py,v 1.5 2002-03-14 23:59:24 richard Exp $ """ # python version check from roundup import version_check import sys, os, urllib, StringIO, traceback, cgi, binascii, getopt, imp import BaseHTTPServer # Roundup modules of use here from roundup import cgitb, cgi_client import roundup.instance from roundup.i18n import _ # ## Configuration # # This indicates where the Roundup instance lives ROUNDUP_INSTANCE_HOMES = { 'bar': '/tmp/bar', } ROUNDUP_USER = None # Where to log debugging information to. Use an instance of DevNull if you # don't want to log anywhere. # TODO: actually use this stuff #class DevNull: # def write(self, info): # pass #LOG = open('/var/log/roundup.cgi.log', 'a') #LOG = DevNull() # ## end configuration # class RoundupRequestHandler(BaseHTTPServer.BaseHTTPRequestHandler): ROUNDUP_INSTANCE_HOMES = ROUNDUP_INSTANCE_HOMES ROUNDUP_USER = ROUNDUP_USER def run_cgi(self): """ Execute the CGI command. Wrap an innner call in an error handler so all errors can be caught. """ save_stdin = sys.stdin sys.stdin = self.rfile try: self.inner_run_cgi() except cgi_client.NotFound: self.send_error(404, self.path) except cgi_client.Unauthorised: self.send_error(403, self.path) except: # it'd be nice to be able to detect if these are going to have # any effect... self.send_response(400) self.send_header('Content-Type', 'text/html') self.end_headers() try: reload(cgitb) self.wfile.write(cgitb.breaker()) self.wfile.write(cgitb.html()) except: self.wfile.write("
")
                s = StringIO.StringIO()
                traceback.print_exc(None, s)
                self.wfile.write(cgi.escape(s.getvalue()))
                self.wfile.write("
\n") sys.stdin = save_stdin do_GET = do_POST = do_HEAD = send_head = run_cgi def index(self): ''' Print up an index of the available instances ''' self.send_response(200) self.send_header('Content-Type', 'text/html') self.end_headers() w = self.wfile.write w(_('Roundup instances index\n')) w(_('

Roundup instances index

    \n')) for instance in self.ROUNDUP_INSTANCE_HOMES.keys(): w(_('
  1. %(instance_name)s\n')%{ 'instance_url': urllib.quote(instance), 'instance_name': cgi.escape(instance)}) w(_('
')) def inner_run_cgi(self): ''' This is the inner part of the CGI handling ''' rest = self.path i = rest.rfind('?') if i >= 0: rest, query = rest[:i], rest[i+1:] else: query = '' # figure the instance if rest == '/': return self.index() l_path = rest.split('/') instance_name = urllib.unquote(l_path[1]) if self.ROUNDUP_INSTANCE_HOMES.has_key(instance_name): instance_home = self.ROUNDUP_INSTANCE_HOMES[instance_name] instance = roundup.instance.open(instance_home) else: raise cgi_client.NotFound # figure out what the rest of the path is if len(l_path) > 2: rest = '/'.join(l_path[2:]) else: rest = '/' # Set up the CGI environment env = {} env['INSTANCE_NAME'] = instance_name env['REQUEST_METHOD'] = self.command env['PATH_INFO'] = urllib.unquote(rest) if query: env['QUERY_STRING'] = query host = self.address_string() if self.headers.typeheader is None: env['CONTENT_TYPE'] = self.headers.type else: env['CONTENT_TYPE'] = self.headers.typeheader length = self.headers.getheader('content-length') if length: env['CONTENT_LENGTH'] = length co = filter(None, self.headers.getheaders('cookie')) if co: env['HTTP_COOKIE'] = ', '.join(co) env['SCRIPT_NAME'] = '' env['SERVER_NAME'] = self.server.server_name env['SERVER_PORT'] = str(self.server.server_port) env['HTTP_HOST'] = self.headers['host'] decoded_query = query.replace('+', ' ') # do the roundup thang client = instance.Client(instance, self, env) client.main() def usage(message=''): if message: message = _('Error: %(error)s\n\n')%{'error': message} print _('''%(message)sUsage: roundup-server [-n hostname] [-p port] [name=instance home]* -n: sets the host name -p: sets the port to listen on name=instance home Sets the instance home(s) to use. The name is how the instance is identified in the URL (it's the first part of the URL path). The instance home is the directory that was identified when you did "roundup-admin init". You may specify any number of these name=home pairs on the command-line. For convenience, you may edit the ROUNDUP_INSTANCE_HOMES variable in the roundup-server file instead. ''')%locals() sys.exit(0) def run(): hostname = '' port = 8080 try: # handle the command-line args try: optlist, args = getopt.getopt(sys.argv[1:], 'n:p:u:') except getopt.GetoptError, e: usage(str(e)) user = ROUNDUP_USER for (opt, arg) in optlist: if opt == '-n': hostname = arg elif opt == '-p': port = int(arg) elif opt == '-u': user = arg elif opt == '-h': usage() if hasattr(os, 'getuid'): # if root, setuid to the running user if not os.getuid() and user is not None: try: import pwd except ImportError: raise ValueError, _("Can't change users - no pwd module") try: uid = pwd.getpwnam(user)[2] except KeyError: raise ValueError, _("User %(user)s doesn't exist")%locals() os.setuid(uid) elif os.getuid() and user is not None: print _('WARNING: ignoring "-u" argument, not root') # People can remove this check if they're really determined if not os.getuid() and user is None: raise ValueError, _("Can't run as root!") # handle instance specs if args: d = {} for arg in args: try: name, home = arg.split('=') except ValueError: raise ValueError, _("Instances must be name=home") d[name] = home RoundupRequestHandler.ROUNDUP_INSTANCE_HOMES = d except SystemExit: raise except: exc_type, exc_value = sys.exc_info()[:2] usage('%s: %s'%(exc_type, exc_value)) # we don't want the cgi module interpreting the command-line args ;) sys.argv = sys.argv[:1] address = (hostname, port) httpd = BaseHTTPServer.HTTPServer(address, RoundupRequestHandler) print _('Roundup server started on %(address)s')%locals() httpd.serve_forever() if __name__ == '__main__': run() # # $Log: not supported by cvs2svn $ # Revision 1.4 2002/02/21 07:02:54 richard # The correct var is "HTTP_HOST" # # Revision 1.3 2002/02/21 06:57:39 richard # . Added popup help for classes using the classhelp html template function. # - add # to an item page, and it generates a link to a popup window which displays # the id, name and description for the priority class. The description # field won't exist in most installations, but it will be added to the # default templates. # # Revision 1.2 2002/01/29 20:07:15 jhermann # Conversion to generated script stubs # # Revision 1.1 2002/01/29 19:53:08 jhermann # Moved scripts from top-level dir to roundup.scripts subpackage # # Revision 1.25 2002/01/05 02:21:21 richard # fixes # # Revision 1.24 2002/01/05 02:19:03 richard # i18n'ification # # Revision 1.23 2001/12/15 23:47:07 richard # sys module went away... # # Revision 1.22 2001/12/13 00:20:01 richard # . Centralised the python version check code, bumped version to 2.1.1 (really # needs to be 2.1.2, but that isn't released yet :) # # Revision 1.21 2001/12/02 05:06:16 richard # . We now use weakrefs in the Classes to keep the database reference, so # the close() method on the database is no longer needed. # I bumped the minimum python requirement up to 2.1 accordingly. # . #487480 ] roundup-server # . #487476 ] INSTALL.txt # # I also cleaned up the change message / post-edit stuff in the cgi client. # There's now a clearly marked "TODO: append the change note" where I believe # the change note should be added there. The "changes" list will obviously # have to be modified to be a dict of the changes, or somesuch. # # More testing needed. # # Revision 1.20 2001/11/26 22:55:56 richard # Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # # Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # # Revision 1.19 2001/11/12 22:51:04 jhermann # Fixed option & associated error handling # # Revision 1.18 2001/11/01 22:04:37 richard # Started work on supporting a pop3-fetching server # Fixed bugs: # . bug #477104 ] HTML tag error in roundup-server # . bug #477107 ] HTTP header problem # # Revision 1.17 2001/10/29 23:55:44 richard # Fix to CGI top-level index (thanks Juergen Hermann) # # Revision 1.16 2001/10/27 00:12:21 richard # Fixed roundup-server for windows, thanks Juergen Hermann. # # Revision 1.15 2001/10/12 02:23:26 richard # Didn't clean up after myself :) # # Revision 1.14 2001/10/12 02:20:32 richard # server now handles setuid'ing much better # # Revision 1.13 2001/10/05 02:23:24 richard # . roundup-admin create now prompts for property info if none is supplied # on the command-line. # . hyperdb Class getprops() method may now return only the mutable # properties. # . Login now uses cookies, which makes it a whole lot more flexible. We can # now support anonymous user access (read-only, unless there's an # "anonymous" user, in which case write access is permitted). Login # handling has been moved into cgi_client.Client.main() # . The "extended" schema is now the default in roundup init. # . The schemas have had their page headings modified to cope with the new # login handling. Existing installations should copy the interfaces.py # file from the roundup lib directory to their instance home. # . Incorrectly had a Bizar Software copyright on the cgitb.py module from # Ping - has been removed. # . Fixed a whole bunch of places in the CGI interface where we should have # been returning Not Found instead of throwing an exception. # . Fixed a deviation from the spec: trying to modify the 'id' property of # an item now throws an exception. # # Revision 1.12 2001/09/29 13:27:00 richard # CGI interfaces now spit up a top-level index of all the instances they can # serve. # # Revision 1.11 2001/08/07 00:24:42 richard # stupid typo # # Revision 1.10 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.9 2001/08/05 07:44:36 richard # Instances are now opened by a special function that generates a unique # module name for the instances on import time. # # Revision 1.8 2001/08/03 01:28:33 richard # Used the much nicer load_package, pointed out by Steve Majewski. # # Revision 1.7 2001/08/03 00:59:34 richard # Instance import now imports the instance using imp.load_module so that # we can have instance homes of "roundup" or other existing python package # names. # # Revision 1.6 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.5 2001/07/24 01:07:59 richard # Added command-line arg handling to roundup-server so it's more useful # out-of-the-box. # # Revision 1.4 2001/07/23 10:31:45 richard # disabled the reloading until it can be done properly # # Revision 1.3 2001/07/23 08:53:44 richard # Fixed the ROUNDUPS decl in roundup-server # Move the installation notes to INSTALL # # Revision 1.2 2001/07/23 04:05:05 anthonybaxter # actually quit if python version wrong # # Revision 1.1 2001/07/23 03:46:48 richard # moving the bin files to facilitate out-of-the-boxness # # Revision 1.1 2001/07/22 11:15:45 richard # More Grande Splite stuff # # # vim: set filetype=python ts=4 sw=4 et si