code-ed7a01a453f3/templates/classic/.cvsignore0000644000000000000000000000004007767163320017347 0ustar 00000000000000*.pyc *.pyo htmlbase.py *.cover code-ed7a01a453f3/templates/classic/TEMPLATE-INFO.txt0000644000000000000000000000053107767163320020061 0ustar 00000000000000Name: classic Description: This is a generic issue tracker that may be used to track bugs, feature requests, project issues or any number of other types of issues. Most users of Roundup will find that this template suits them, with perhaps a few customisations. Intended-For: All first-time Roundup users code-ed7a01a453f3/templates/classic/__init__.py0000644000000000000000000000205207767163320017465 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.1 2003-04-17 03:26:03 richard Exp $ import config from dbinit import open, init from interfaces import Client, MailGW # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/config.py0000644000000000000000000001214207767163320017174 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: config.py,v 1.4 2003-12-06 00:00:54 richard Exp $ import os # roundup home is this package's directory TRACKER_HOME=os.path.split(__file__)[0] # The SMTP mail host that roundup will use to send mail MAILHOST = 'localhost' # If your SMTP mail host requires a username and password for access, then # specify them here. # eg. MAILUSER = ('username', 'password') MAILUSER = () # If your SMTP mail host provides or requires TLS (Transport Layer # Security) then set MAILHOST_TLS = 'yes' # Optionallly, you may also set MAILHOST_TLS_KEYFILE to the name of a PEM # formatted file that contains your private key, and MAILHOST_TLS_CERTFILE # to the name of a PEM formatted certificate chain file. MAILHOST_TLS = 'no' MAILHOST_TLS_KEYFILE = '' MAILHOST_TLS_CERTFILE = '' # The domain name used for email addresses. MAIL_DOMAIN = 'your.tracker.email.domain.example' # This is the directory that the database is going to be stored in DATABASE = os.path.join(TRACKER_HOME, 'db') # This is the directory that the HTML templates reside in TEMPLATES = os.path.join(TRACKER_HOME, 'html') # A descriptive name for your roundup instance TRACKER_NAME = 'Roundup issue tracker' # The email address that mail to roundup should go to TRACKER_EMAIL = 'issue_tracker@%s'%MAIL_DOMAIN # The web address that the tracker is viewable at. This will be included in # information sent to users of the tracker. The URL MUST include the cgi-bin # part or anything else that is required to get to the home page of the # tracker. You MUST include a trailing '/' in the URL. TRACKER_WEB = 'http://tracker.example/cgi-bin/roundup.cgi/bugs/' # The email address that roundup will complain to if it runs into trouble ADMIN_EMAIL = 'roundup-admin@%s'%MAIL_DOMAIN # Additional text to include in the "name" part of the From: address used # in nosy messages. If the sending user is "Foo Bar", the From: line is # usually: # "Foo Bar" # the EMAIL_FROM_TAG goes inside the "Foo Bar" quotes like so: # "Foo Bar EMAIL_FROM_TAG" EMAIL_FROM_TAG = "" # Send nosy messages to the author of the message? # If 'new' is used, then the author will only be sent the message when the # message creates a new issue. If 'yes' then the author will always be sent # a copy of the message they wrote. MESSAGES_TO_AUTHOR = 'no' # one of 'yes', 'no', 'new' # Does the author of a message get placed on the nosy list automatically? # If 'new' is used, then the author will only be added when a message # creates a new issue. If 'yes', then the author will be added on followups # too. If 'no', they're never added to the nosy. ADD_AUTHOR_TO_NOSY = 'new' # one of 'yes', 'no', 'new' # Do the recipients (To:, Cc:) of a message get placed on the nosy list? # If 'new' is used, then the recipients will only be added when a message # creates a new issue. If 'yes', then the recipients will be added on followups # too. If 'no', they're never added to the nosy. ADD_RECIPIENTS_TO_NOSY = 'new' # either 'yes', 'no', 'new' # Where to place the email signature EMAIL_SIGNATURE_POSITION = 'bottom' # one of 'top', 'bottom', 'none' # Keep email citations when accepting messages. Setting this to "no" strips # out "quoted" text from the message. Signatures are also stripped. EMAIL_KEEP_QUOTED_TEXT = 'yes' # either 'yes' or 'no' # Preserve the email body as is - that is, keep the citations _and_ # signatures. EMAIL_LEAVE_BODY_UNCHANGED = 'no' # either 'yes' or 'no' # Default class to use in the mailgw if one isn't supplied in email # subjects. To disable, comment out the variable below or leave it blank. # Examples: MAIL_DEFAULT_CLASS = 'issue' # use "issue" class by default #MAIL_DEFAULT_CLASS = '' # disable (or just comment the var out) # HTML version to generate. The templates are html4 by default. If you # wish to make them xhtml, then you'll need to change this var to 'xhtml' # too so all auto-generated HTML is compliant. HTML_VERSION = 'html4' # either 'html4' or 'xhtml' # # SECURITY DEFINITIONS # # define the Roles that a user gets when they register with the tracker # these are a comma-separated string of role names (e.g. 'Admin,User') NEW_WEB_USER_ROLES = 'User' NEW_EMAIL_USER_ROLES = 'User' # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/dbinit.py0000644000000000000000000001717507767163320017213 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: dbinit.py,v 1.2 2003-11-10 03:56:39 richard Exp $ import os import config from select_db import Database, Class, FileClass, IssueClass def open(name=None): ''' as from the roundupdb method openDB ''' from roundup.hyperdb import String, Password, Date, Link, Multilink from roundup.hyperdb import Interval, Boolean, Number # open the database db = Database(config, name) # # Now initialise the schema. Must do this each time the database is # opened. # # Class automatically gets these properties: # creation = Date() # activity = Date() # creator = Link('user') pri = Class(db, "priority", name=String(), order=String()) pri.setkey("name") stat = Class(db, "status", name=String(), order=String()) stat.setkey("name") keyword = Class(db, "keyword", name=String()) keyword.setkey("name") query = Class(db, "query", klass=String(), name=String(), url=String()) query.setkey("name") # add any additional database schema configuration here # Note: roles is a comma-separated string of Role names user = Class(db, "user", username=String(), password=Password(), address=String(), realname=String(), phone=String(), organisation=String(), alternate_addresses=String(), queries=Multilink('query'), roles=String(), timezone=String()) user.setkey("username") # FileClass automatically gets these properties: # content = String() [saved to disk in /db/files/] # (it also gets the Class properties creation, activity and creator) msg = FileClass(db, "msg", author=Link("user", do_journal='no'), recipients=Multilink("user", do_journal='no'), date=Date(), summary=String(), files=Multilink("file"), messageid=String(), inreplyto=String()) file = FileClass(db, "file", name=String(), type=String()) # IssueClass automatically gets these properties: # title = String() # messages = Multilink("msg") # files = Multilink("file") # nosy = Multilink("user") # superseder = Multilink("issue") # (it also gets the Class properties creation, activity and creator) issue = IssueClass(db, "issue", assignedto=Link("user"), topic=Multilink("keyword"), priority=Link("priority"), status=Link("status")) # # SECURITY SETTINGS # # See the configuration and customisation document for information # about security setup. # Add new Permissions for this schema for cl in 'issue', 'file', 'msg', 'user', 'query', 'keyword': db.security.addPermission(name="Edit", klass=cl, description="User is allowed to edit "+cl) db.security.addPermission(name="View", klass=cl, description="User is allowed to access "+cl) # Assign the access and edit Permissions for issue, file and message # to regular users now for cl in 'issue', 'file', 'msg', 'query', 'keyword': p = db.security.getPermission('View', cl) db.security.addPermissionToRole('User', p) p = db.security.getPermission('Edit', cl) db.security.addPermissionToRole('User', p) # and give the regular users access to the web and email interface p = db.security.getPermission('Web Access') db.security.addPermissionToRole('User', p) p = db.security.getPermission('Email Access') db.security.addPermissionToRole('User', p) # May users view other user information? Comment these lines out # if you don't want them to p = db.security.getPermission('View', 'user') db.security.addPermissionToRole('User', p) # Assign the appropriate permissions to the anonymous user's Anonymous # Role. Choices here are: # - Allow anonymous users to register through the web p = db.security.getPermission('Web Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous (new) users to register through the email gateway p = db.security.getPermission('Email Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to the "issue" class of data # Note: this also grants access to related information like files, # messages, statuses etc that are linked to issues p = db.security.getPermission('View', 'issue') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to edit the "issue" class of data # Note: this also grants access to create related information like # files and messages etc that are linked to issues #p = db.security.getPermission('Edit', 'issue') #db.security.addPermissionToRole('Anonymous', p) # oh, g'wan, let anonymous access the web interface too p = db.security.getPermission('Web Access') db.security.addPermissionToRole('Anonymous', p) import detectors detectors.init(db) # schema is set up - run any post-initialisation db.post_init() return db def init(adminpw): ''' as from the roundupdb method initDB Open the new database, and add new nodes - used for initialisation. You can edit this before running the "roundup-admin initialise" command to change the initial database entries. ''' dbdir = os.path.join(config.DATABASE, 'files') if not os.path.isdir(dbdir): os.makedirs(dbdir) db = open("admin") db.clear() # # INITIAL PRIORITY AND STATUS VALUES # pri = db.getclass('priority') pri.create(name="critical", order="1") pri.create(name="urgent", order="2") pri.create(name="bug", order="3") pri.create(name="feature", order="4") pri.create(name="wish", order="5") stat = db.getclass('status') stat.create(name="unread", order="1") stat.create(name="deferred", order="2") stat.create(name="chatting", order="3") stat.create(name="need-eg", order="4") stat.create(name="in-progress", order="5") stat.create(name="testing", order="6") stat.create(name="done-cbb", order="7") stat.create(name="resolved", order="8") # create the two default users user = db.getclass('user') user.create(username="admin", password=adminpw, address=config.ADMIN_EMAIL, roles='Admin') user.create(username="anonymous", roles='Anonymous') # add any additional database create steps here - but only if you # haven't initialised the database with the admin "initialise" command db.commit() db.close() # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/detectors/.cvsignore0000644000000000000000000000002407767163320021345 0ustar 00000000000000*.pyc *.pyo *.cover code-ed7a01a453f3/templates/classic/detectors/__init__.py0000644000000000000000000000310207767163320021456 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: __init__.py,v 1.4 2003-10-07 06:18:45 richard Exp $ import sys, os, imp def init(db): ''' execute the init functions of all the modules in this directory ''' this_dir = os.path.split(__file__)[0] for filename in os.listdir(this_dir): name, ext = os.path.splitext(filename) if name == '__init__': continue if ext == '.py': path = os.path.abspath(os.path.join(this_dir, filename)) fp = open(path) try: module = imp.load_module(name, fp, path, ('.py', 'r', imp.PY_SOURCE)) finally: fp.close() module.init(db) # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/detectors/messagesummary.py0000644000000000000000000000105307767163320022764 0ustar 00000000000000#$Id: messagesummary.py,v 1.1 2003-04-17 03:26:38 richard Exp $ from roundup.mailgw import parseContent def summarygenerator(db, cl, nodeid, newvalues): ''' If the message doesn't have a summary, make one for it. ''' if newvalues.has_key('summary') or not newvalues.has_key('content'): return summary, content = parseContent(newvalues['content'], 1, 1) newvalues['summary'] = summary def init(db): # fire before changes are made db.msg.audit('create', summarygenerator) # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/detectors/nosyreaction.py0000644000000000000000000001275307767163320022450 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: nosyreaction.py,v 1.2 2003-09-04 00:47:01 richard Exp $ from roundup import roundupdb, hyperdb def nosyreaction(db, cl, nodeid, oldvalues): ''' A standard detector is provided that watches for additions to the "messages" property. When a new message is added, the detector sends it to all the users on the "nosy" list for the issue that are not already on the "recipients" list of the message. Those users are then appended to the "recipients" property on the message, so multiple copies of a message are never sent to the same user. The journal recorded by the hyperdatabase on the "recipients" property then provides a log of when the message was sent to whom. ''' # send a copy of all new messages to the nosy list for msgid in determineNewMessages(cl, nodeid, oldvalues): try: cl.nosymessage(nodeid, msgid, oldvalues) except roundupdb.MessageSendError, message: raise roundupdb.DetectorError, message def determineNewMessages(cl, nodeid, oldvalues): ''' Figure a list of the messages that are being added to the given node in this transaction. ''' messages = [] if oldvalues is None: # the action was a create, so use all the messages in the create messages = cl.get(nodeid, 'messages') elif oldvalues.has_key('messages'): # the action was a set (so adding new messages to an existing issue) m = {} for msgid in oldvalues['messages']: m[msgid] = 1 messages = [] # figure which of the messages now on the issue weren't there before for msgid in cl.get(nodeid, 'messages'): if not m.has_key(msgid): messages.append(msgid) return messages def updatenosy(db, cl, nodeid, newvalues): '''Update the nosy list for changes to the assignedto ''' # nodeid will be None if this is a new node current = {} if nodeid is None: ok = ('new', 'yes') else: ok = ('yes',) # old node, get the current values from the node if they haven't # changed if not newvalues.has_key('nosy'): nosy = cl.get(nodeid, 'nosy') for value in nosy: if not current.has_key(value): current[value] = 1 # if the nosy list changed in this transaction, init from the new value if newvalues.has_key('nosy'): nosy = newvalues.get('nosy', []) for value in nosy: if not db.hasnode('user', value): continue if not current.has_key(value): current[value] = 1 # add assignedto(s) to the nosy list if newvalues.has_key('assignedto') and newvalues['assignedto'] is not None: propdef = cl.getprops() if isinstance(propdef['assignedto'], hyperdb.Link): assignedto_ids = [newvalues['assignedto']] elif isinstance(propdef['assignedto'], hyperdb.Multilink): assignedto_ids = newvalues['assignedto'] for assignedto_id in assignedto_ids: if not current.has_key(assignedto_id): current[assignedto_id] = 1 # see if there's any new messages - if so, possibly add the author and # recipient to the nosy if newvalues.has_key('messages'): if nodeid is None: ok = ('new', 'yes') messages = newvalues['messages'] else: ok = ('yes',) # figure which of the messages now on the issue weren't # there before oldmessages = cl.get(nodeid, 'messages') messages = [] for msgid in newvalues['messages']: if msgid not in oldmessages: messages.append(msgid) # configs for nosy modifications add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new') add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new') # now for each new message: msg = db.msg for msgid in messages: if add_author in ok: authid = msg.get(msgid, 'author') current[authid] = 1 # add on the recipients of the message if add_recips in ok: for recipient in msg.get(msgid, 'recipients'): current[recipient] = 1 # that's it, save off the new nosy list newvalues['nosy'] = current.keys() def init(db): db.issue.react('create', nosyreaction) db.issue.react('set', nosyreaction) db.issue.audit('create', updatenosy) db.issue.audit('set', updatenosy) # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/detectors/statusauditor.py0000644000000000000000000000537107767163320022644 0ustar 00000000000000# Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: statusauditor.py,v 1.4 2003-10-24 15:51:43 jlgijsbers Exp $ def chatty(db, cl, nodeid, newvalues): ''' If the issue is currently 'unread', 'resolved', 'done-cbb' or None, then set it to 'chatting' ''' # don't fire if there's no new message (ie. chat) if not newvalues.has_key('messages'): return if newvalues['messages'] == cl.get(nodeid, 'messages'): return # get the chatting state ID try: chatting_id = db.status.lookup('chatting') except KeyError: # no chatting state, ignore all this stuff return # get the current value current_status = cl.get(nodeid, 'status') # see if there's an explicit change in this transaction if newvalues.has_key('status'): # yep, skip return # determine the id of 'unread', 'resolved' and 'chatting' fromstates = [] for state in 'unread resolved done-cbb'.split(): try: fromstates.append(db.status.lookup(state)) except KeyError: pass # ok, there's no explicit change, so check if we are in a state that # should be changed if current_status in fromstates + [None]: # yep, we're now chatting newvalues['status'] = chatting_id def presetunread(db, cl, nodeid, newvalues): ''' Make sure the status is set on new issues ''' if newvalues.has_key('status') and newvalues['status']: return # ok, do it newvalues['status'] = db.status.lookup('unread') def init(db): # fire before changes are made db.issue.audit('set', chatty) db.issue.audit('create', presetunread) # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/detectors/userauditor.py0000644000000000000000000000364407767163320022300 0ustar 00000000000000# Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: userauditor.py,v 1.2 2003-11-11 22:25:37 richard Exp $ def audit_user_fields(db, cl, nodeid, newvalues): ''' Make sure user properties are valid. - email address has no spaces in it - roles specified exist ''' if newvalues.has_key('address') and ' ' in newvalues['address']: raise ValueError, 'Email address must not contain spaces' if newvalues.has_key('roles'): roles = [x.lower().strip() for x in newvalues['roles'].split(',')] for rolename in roles: if not db.security.role.has_key(rolename): raise ValueError, 'Role "%s" does not exist'%rolename def init(db): # fire before changes are made db.user.audit('set', audit_user_fields) db.user.audit('create', audit_user_fields) # vim: set filetype=python ts=4 sw=4 et si code-ed7a01a453f3/templates/classic/html/_generic.help.html0000644000000000000000000000655607767163320021725 0ustar 00000000000000 Property
 x
 x
<< previous   current next >>  
code-ed7a01a453f3/templates/classic/html/_generic.index.html0000644000000000000000000000312507767163320022071 0ustar 00000000000000

You are not allowed to view this page.

You may edit the contents of the class using this form. Commas, newlines and double quotes (") must be handled delicately. You may include commas and newlines by enclosing the values in double-quotes ("). Double quotes themselves must be quoted by doubling ("").

Multilink properties have their multiple values colon (":") separated (... ,"one:two:three", ...)

Remove entries by deleting their line. Add new entries by appending them to the table - put an X in the id column.


view ok code-ed7a01a453f3/templates/classic/html/_generic.item.html0000644000000000000000000000333607767163320021724 0ustar 00000000000000

You are not allowed to view this page.
  submit button will go here
code-ed7a01a453f3/templates/classic/html/file.index.html0000644000000000000000000000165607767163320021244 0ustar 00000000000000 <span tal:replace="config/TRACKER_NAME" />: List of files

List of files

Download Content Type Uploaded By Date
dld link content type creator's name creation date
code-ed7a01a453f3/templates/classic/html/file.item.html0000644000000000000000000000320307767163320021061 0ustar 00000000000000 File display

File display

You are not allowed to view this page.
Name
Content Type
  submit button here
download
Name
Content Type
code-ed7a01a453f3/templates/classic/html/help_controls.js0000644000000000000000000000757707767163320021552 0ustar 00000000000000// initial values for either Nosy, Superseder, Topic and Waiting On, // depending on which has called original_field = window.opener.document.itemSynopsis[field].value; // pop() and push() methods for pre5.5 IE browsers function bName() { // test for IE if (navigator.appName == "Microsoft Internet Explorer") return 1; return 0; } function bVer() { // return version number (e.g., 4.03) msieIndex = navigator.appVersion.indexOf("MSIE") + 5; return(parseFloat(navigator.appVersion.substr(msieIndex,3))); } function pop() { // make a pop method for old IE browsers var lastElement = this[this.length - 1]; this.length--; return lastElement; } function push() { // make a pop method for old IE browsers var sub = this.length; for (var i = 0; i < push.arguments.length; ++i) { this[sub] = push.arguments[i]; sub++; } } // add the pop() and push() method to Array prototype for old IE browser if (bName() == 1 && bVer() >= 5.5); else { Array.prototype.pop = pop; Array.prototype.push = push; } function trim(value) { var temp = value; var obj = /^(\s*)([\W\w]*)(\b\s*$)/; if (obj.test(temp)) { temp = temp.replace(obj, '$2'); } var obj = / /g; while (temp.match(obj)) { temp = temp.replace(obj, " "); } return temp; } function determineList() { // generate a comma-separated list of the checked items if (document.frm_help.check==undefined) { return; } var list = new Array(); if (document.frm_help.check.length==undefined) { if (document.frm_help.check.checked) { list.push(document.frm_help.check.value); } } else { for (box=0; box < document.frm_help.check.length; box++) { if (document.frm_help.check[box].checked) { list.push(document.frm_help.check[box].value); } } } return new String(list.join(',')); } function updateList() { // write back to opener window if (document.frm_help.check==undefined) { return; } window.opener.document.itemSynopsis[field].value = determineList(); } function updatePreview() { // update the preview box if (document.frm_help.check==undefined) { return; } writePreview(determineList()); } function clearList() { // uncheck all checkboxes if (document.frm_help.check==undefined) { return; } for (box=0; box < document.frm_help.check.length; box++) { document.frm_help.check[box].checked = false; } } function reviseList(vals) { // update the checkboxes based on the preview field if (document.frm_help.check==undefined) { return; } var to_check; var list = vals.split(","); if (document.frm_help.check.length==undefined) { check = document.frm_help.check; to_check = false; for (val in list) { if (check.value==trim(list[val])) { to_check = true; break; } } check.checked = to_check; } else { for (box=0; box < document.frm_help.check.length; box++) { check = document.frm_help.check[box]; to_check = false; for (val in list) { if (check.value==trim(list[val])) { to_check = true; break; } } check.checked = to_check; } } } function resetList() { // reset preview and check boxes to initial values if (document.frm_help.check==undefined) { return; } writePreview(original_field); reviseList(original_field); } function writePreview(val) { // writes a value to the text_preview document.frm_help.text_preview.value = val; } function focusField(name) { for(i=0; i < document.forms.length; ++i) { var obj = document.forms[i].elements[name]; if (obj && obj.focus) {obj.focus();} } } function selectField(name) { for(i=0; i < document.forms.length; ++i) { var obj = document.forms[i].elements[name]; if (obj && obj.focus){obj.focus();} if (obj && obj.select){obj.select();} } } code-ed7a01a453f3/templates/classic/html/home.classlist.html0000644000000000000000000000124507767163320022141 0ustar 00000000000000 List of classes

List of classes

classname
name type
code-ed7a01a453f3/templates/classic/html/home.html0000644000000000000000000000105507767163320020140 0ustar 00000000000000 code-ed7a01a453f3/templates/classic/html/issue.index.html0000644000000000000000000001113707767163320021450 0ustar 00000000000000 <span tal:replace="config/TRACKER_NAME" />: List of issues

List of issues

You are not allowed to view this page.
Priority ID Creation Activity Topic Title Status Created By Assigned To
          title      
<< previous   current next >>  
Sort on: Descending:
Group on: Descending:
code-ed7a01a453f3/templates/classic/html/issue.item.html0000644000000000000000000001206307767163320021276 0ustar 00000000000000 <span tal:replace="config/TRACKER_NAME" />: <span tal:condition="context/id" tal:replace="string:Issue ${context/id}: ${context/title}" /> <tal:x tal:condition="not:context/id">New Issue</tal:x>

Issue Editing

You are not allowed to view this page.
Title title
Priority priority Status status
Superseder
View: 		Nosy List
Assigned To assignedto menu Topics
Change Note
File
  submit button will go here
Note:  highlighted  fields are required.
Titletitle
Prioritypriority Statusstatus
Superseder
View: 		Nosy List
Assigned To Topics

activity info

Messages
author date remove 
content
Files
File nameUploaded
dld link creator's name, creation date
code-ed7a01a453f3/templates/classic/html/issue.search.html0000644000000000000000000001277107767163320021613 0ustar 00000000000000 Issue searching

Issue searching

  Filter on Display Sort on Group on
All text*:      
Title:  
Topic:
ID:  
Creation Date:
Creator:
Activity:  
Priority:
Status:
Assigned to:
Pagesize:
Start With:
Sort Descending:
Group Descending:
Query name**:
 
  *: The "all text" field will look in message bodies and issue titles
**: If you supply a name, the query will be saved off and available as a link in the sidebar
code-ed7a01a453f3/templates/classic/html/keyword.item.html0000644000000000000000000000314207767163320021630 0ustar 00000000000000 Keyword editing

Keyword editing

Existing Keywords
keyword here
To edit an existing keyword (for spelling or typing errors), click on its entry above.

To create a new keyword, enter it below and click "Submit New Entry".

Keyword name
  submit button will go here
code-ed7a01a453f3/templates/classic/html/msg.index.html0000644000000000000000000000131507767163320021103 0ustar 00000000000000 <span tal:replace="config/TRACKER_NAME" />: List of messages

Message listing

Messages
author date 
content
code-ed7a01a453f3/templates/classic/html/msg.item.html0000644000000000000000000000300607767163320020731 0ustar 00000000000000 <span tal:replace="config/TRACKER_NAME" />: <span tal:condition="context/id" tal:replace="string:Message ${context/id}" /> <tal:x tal:condition="not:context/id">New Message</tal:x>

Message Editing

Author
Recipients
Date
Content

 






 
Files

 
File nameUploaded

 

  
   dld link
  
  
   creator's name,
   creation date
  
 








code-ed7a01a453f3/templates/classic/html/page.html0000644000000000000000000001346507767163320020134 0ustar  00000000000000



title goes here














  
 
name






 
  

   Your Queries

   
    link

   
  


  

   

    Issues

    Create New

    Show Unassigned

    Show All

    Search

    
    
    
   

  


  

   Keywords

   Create New

   Edit Existing

  


  

   Administration

   
    Class List

   
   User List

   Add User
  


  

   

    Login

    

    

    

    
    Register

    Lost your login?

   

  

   
  

   Hello, username

   My Issues

   My Details

   Logout
  

  

   Help

   Roundup docs
  

 		
 
  
error

  
error

 		




 Page content goes here














  



  



  



  



  

code-ed7a01a453f3/templates/classic/html/query.item.html0000644000000000000000000000011607767163320021307 0ustar  00000000000000


code-ed7a01a453f3/templates/classic/html/style.css0000644000000000000000000001451507767163320020201 0ustar  00000000000000/* main page styles */
body.body {
  font-family: sans-serif, Arial, Helvetica;
  color: #333333;
  margin: 0px 0px 0px 0px;
}
a[href]:hover { color:blue; text-decoration: underline; }
a[href]:link { color:blue; text-decoration: none; }
a[href] { color:blue; text-decoration: none; }

table.body {
  border: 0;
  padding: 0;
  border-spacing: 0px;
  border-collapse: separate;
}

/* don't display the sidebar when printing */
@media print {
    td.page-header-left {
        display: none;
    }
    td.sidebar {
        display: none;
    }
}

td.page-header-left {
  padding: 5px;
  border-bottom: 1px solid #444444;
}

td.page-header-top {
  padding: 5px;
  border-bottom: 1px solid #444444;
}

td.sidebar {
  padding: 1 0 0 1;
  white-space: nowrap;
}
td.sidebar form {
     margin: 0 0 0 0;
}

td.sidebar p.classblock {
  padding: 2 5 2 5;
  margin: 1 1 1 1;
  border: 1px solid #444444;
  background-color: #eeeeee;
}

td.sidebar p.userblock {
  padding: 2 5 2 5;
  margin: 1 1 1 1;
  border: 1px solid #444444;
  background-color: #eeeeff;
}

td.content {
  padding: 1 5 1 5;
  vertical-align: top;
  width: 100%;
}

td.date, th.date { 
  white-space: nowrap;
}

p.ok-message {
  background-color: #22bb22;
  padding: 5 5 5 5;
  color: white;
  font-weight: bold;
}
p.error-message {
  background-color: #bb2222;
  padding: 5 5 5 5;
  color: white;
  font-weight: bold;
}


/* style for forms */
table.form {
  padding: 2;
  border-spacing: 0px;
  border-collapse: separate;
}

table.form th {
  color: #333388;
  text-align: right;
  vertical-align: top;
  font-weight: normal;
  white-space: nowrap;
}

table.form th.header {
  font-weight: bold;
  background-color: #eeeeff;
  text-align: left;
}

table.form th.required {
  font-weight: bold;
}

table.form td {
  color: #333333;
  empty-cells: show;
  vertical-align: top;
}

table.form td.optional {
  font-weight: bold;
  font-style: italic;
}

table.form td.html {
  color: #777777;
}

/* style for lists */
table.list {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.list th {
  padding: 0 4 0 4;
  color: #404070;
  background-color: #eeeeff;
  border: 1px solid white;
  vertical-align: top;
  empty-cells: show;
}
table.list th a[href]:hover { color: #404070 }
table.list th a[href]:link { color: #404070 }
table.list th a[href] { color: #404070 }
table.list th.group {
  background-color: #f4f4ff;
  text-align: center;
}

table.list td {
  padding: 0 4 0 4;
  border: 1px solid white;
  color: #404070;
  background-color: #efefef;
  vertical-align: top;
  empty-cells: show;
}

table.list tr.navigation th {
  width: 33%;
  border-style: hidden;
  text-align: center;
}
table.list tr.navigation td {
    border: none
}
table.list tr.navigation th:first-child {
  text-align: left;
}
table.list tr.navigation th:last-child {
  text-align: right;
}


/* style for message displays */
table.messages {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.messages th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.messages th {
  font-weight: bold;
  color: black;
  text-align: left;
  border-bottom: 1px solid #afafaf;
}

table.messages td {
  font-family: monospace;
  background-color: #efefef;
  border-bottom: 1px solid #afafaf;
  color: black;
  empty-cells: show;
  border-right: 1px solid #afafaf;
  vertical-align: top;
  padding: 2 5 2 5;
}

table.messages td:first-child {
  border-left: 1px solid #afafaf;
  border-right: 1px solid #afafaf;
}

/* style for file displays */
table.files {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.files th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.files th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}

table.files td {
  font-family: monospace;
  empty-cells: show;
}

/* style for history displays */
table.history {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.history th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
  font-size: 100%;
}

table.history th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
  font-size: 90%;
}

table.history td {
  font-size: 90%;
  vertical-align: top;
  empty-cells: show;
}


/* style for class list */
table.classlist {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.classlist th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.classlist th {
  font-weight: bold;
  text-align: left;
}


/* style for class help display */
table.classhelp {      /* the table-layout: fixed;        */ 
  table-layout: fixed; /* compromises quality for speed   */
  overflow: hidden;
  font-size: .9em;
  padding-bottom: 3em;
}

table.classhelp th {
  font-weight: normal;
  text-align: left;
  color: #444444;
  background-color: #efefef;
  border-bottom: 1px solid #afafaf;
  border-top: 1px solid #afafaf;
  text-transform: uppercase;
  vertical-align: middle;
  line-height:1.5em;
}

table.classhelp td {
  vertical-align: middle;
  padding-right: .2em;
  border-bottom: 1px solid #efefef;
  text-align: left;
  empty-cells: show;
}

table.classhelp td {
  white-space: nowrap;
  vertical-align: middle;
  padding-right: .2em;
  border-bottom: 1px solid #efefef;
  text-align: left;
  empty-cells: show;
}

table.classhelp tr:hover {
  background-color: #eeeeee;
}

label.classhelp-label {
  cursor: pointer;
}

#classhelp-controls {
  position: fixed;
  display: block;
  top: auto;
  right: 0;
  bottom: 0;
  left: 0;
  padding: .5em;
  border-top: 2px solid #444444;
  background-color: #eeeeee;
}

#classhelp-controls input.apply {
  width: 7em;
  font-weight: bold;
  margin-right: 2em;
  margin-left: 2em;
}

#classhelp-controls input.preview {
   margin-right: 3em;
   margin-left: 1em;
}

/* style for "other" displays */
table.otherinfo {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.otherinfo th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.otherinfo th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}
code-ed7a01a453f3/templates/classic/html/user.forgotten.html0000644000000000000000000000252107767163320022173 0ustar  00000000000000

Password reset request

 
Password reset request





You have two options if you have forgotten your password. If you 
know the email address you registered with, enter it below.




    

      

        Email Address:
        
      

      

         
        
          
          
          
        
      





Or, if you know your username, then enter it below.




 
Username:  

 







A confirmation email will be sent to you - please follow the
instructions
within it to complete the reset process.




code-ed7a01a453f3/templates/classic/html/user.index.html0000644000000000000000000000247707767163320021305 0ustar  00000000000000

User listing

 
User listing





You are not allowed to view this page.






 Username
 Real name
 Organisation
 Email address
 Phone number
 Retire




 
  username
 
  
  
  
  
 
  
   retire
 







code-ed7a01a453f3/templates/classic/html/user.item.html0000644000000000000000000000737707767163320021140 0ustar  00000000000000

 
<span tal:replace="config/TRACKER_NAME" />: 
<span tal:condition="context/id"
      tal:replace="string:User ${context/id}: ${context/username}" />
<tal:x tal:condition="not:context/id">New User</tal:x> 
 

 

  User
   Editing
 





You are not allowed to view this page.







 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Confirm Password
  password
 

 

  Roles
  roles
  
   
   (to give the user more than one role, enter a comma,separated,list)
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  Timezone
  timezone
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

  
    
   
   
  
  submit button here
 








 
Queries

 
NameActions

 

  
  
   display   
  
  
   remove
  
 






 

  realname
 

 

  Login Name
  username
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  Timezone
  timezone
 

 

  E-mail address
  address
 









code-ed7a01a453f3/templates/classic/html/user.register.html0000644000000000000000000000456107767163320022016 0ustar  00000000000000



 







You are not allowed to view this page.








 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Confirm Password
  password
 

 

  Roles
  roles
  
   
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

   
  
   
   
   
   
  
 













code-ed7a01a453f3/templates/classic/html/user.rego_progress.html0000644000000000000000000000101107767163320023035 0ustar  00000000000000

Registration in progress

 
Registration in progress...





You will shortly receive an email to confirm your registration. To
complete the registration process, visit the link indicated in the
email.





code-ed7a01a453f3/templates/classic/interfaces.py0000644000000000000000000000276107767163320020060 0ustar  00000000000000#
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE.  THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
# 
# $Id: interfaces.py,v 1.1 2003-04-17 03:26:03 richard Exp $

from roundup import mailgw 
from roundup.cgi import client

class Client(client.Client): 
    ''' derives basic CGI implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

class TemplatingUtils:
    ''' Methods implemented on this class will be available to HTML templates
        through the 'utils' variable.
    '''
    pass

class MailGW(mailgw.MailGW): 
    ''' derives basic mail gateway implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

# vim: set filetype=python ts=4 sw=4 et si