code-ea7fb2f416db/templates/classic/.cvsignore0000644000000000000000000000004010066407753017512 0ustar 00000000000000*.pyc *.pyo htmlbase.py *.cover code-ea7fb2f416db/templates/classic/TEMPLATE-INFO.txt0000644000000000000000000000053110066407753020224 0ustar 00000000000000Name: classic Description: This is a generic issue tracker that may be used to track bugs, feature requests, project issues or any number of other types of issues. Most users of Roundup will find that this template suits them, with perhaps a few customisations. Intended-For: All first-time Roundup users code-ea7fb2f416db/templates/classic/__init__.py0000644000000000000000000000205210066407753017630 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.1 2003-04-17 03:26:03 richard Exp $ import config from dbinit import open, init from interfaces import Client, MailGW # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/config.py0000644000000000000000000001522410066407753017343 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: config.py,v 1.9 2004-06-08 05:29:18 richard Exp $ import os # roundup home is this package's directory TRACKER_HOME=os.path.split(__file__)[0] # The SMTP mail host that roundup will use to send mail MAILHOST = 'localhost' # If your SMTP mail host requires a username and password for access, then # specify them here. # eg. MAILUSER = ('username', 'password') MAILUSER = () # If your SMTP mail host provides or requires TLS (Transport Layer # Security) then set MAILHOST_TLS = 'yes' # Optionallly, you may also set MAILHOST_TLS_KEYFILE to the name of a PEM # formatted file that contains your private key, and MAILHOST_TLS_CERTFILE # to the name of a PEM formatted certificate chain file. MAILHOST_TLS = 'no' MAILHOST_TLS_KEYFILE = '' MAILHOST_TLS_CERTFILE = '' # The domain name used for email addresses. MAIL_DOMAIN = 'your.tracker.email.domain.example' # This is the directory that the database is going to be stored in DATABASE = os.path.join(TRACKER_HOME, 'db') # This is the directory that the HTML templates reside in TEMPLATES = os.path.join(TRACKER_HOME, 'html') # A descriptive name for your roundup instance TRACKER_NAME = 'Roundup issue tracker' # The email address that mail to roundup should go to TRACKER_EMAIL = 'issue_tracker@%s'%MAIL_DOMAIN # The web address that the tracker is viewable at. This will be included in # information sent to users of the tracker. The URL MUST include the cgi-bin # part or anything else that is required to get to the home page of the # tracker. You MUST include a trailing '/' in the URL. TRACKER_WEB = 'http://tracker.example/cgi-bin/roundup.cgi/bugs/' # The email address that roundup will complain to if it runs into trouble ADMIN_EMAIL = 'roundup-admin@%s'%MAIL_DOMAIN # These variables define where to log Roundup's internal messages to. # You have two choices - either using the standard Python logging module # or a minimal logging facility built into Roundup. The former is activated # when you provide a LOGGING_CONFIG variable below which contains the # configuration of the logging module. The latter is activated when you # provide the LOGGING_FILENAME and optionally LOGGING_LEVEL variables. If # none of these variables are defined then only errors will be logged, and # they will go to stderr. # LOGGGING_CONFIG = os.path.join(TRACKER_HOME, 'logging.ini') # or, # LOGGING_FILENAME = '/path/to/log file' # LOGGING_LEVEL = 'INFO' # one of 'DEBUG', 'INFO', 'WARNING', 'ERROR' # The 'dispatcher' is a role that can get notified of new items to the # database. It is used by the ERROR_MESSAGES_TO config setting. DISPATCHER_EMAIL = ADMIN_EMAIL # Additional text to include in the "name" part of the From: address used # in nosy messages. If the sending user is "Foo Bar", the From: line is # usually: "Foo Bar" # the EMAIL_FROM_TAG goes inside the "Foo Bar" quotes like so: # "Foo Bar EMAIL_FROM_TAG" EMAIL_FROM_TAG = "" # # SECURITY DEFINITIONS # # define the Roles that a user gets when they register with the tracker # these are a comma-separated string of role names (e.g. 'Admin,User') NEW_WEB_USER_ROLES = 'User' NEW_EMAIL_USER_ROLES = 'User' # Send error message emails to the dispatcher, user, or both? # If 'dispatcher', error messages will only be sent to the dispatcher. # If 'user', error messages will only be sent to the user. # If 'both', error messages will be sent to both individuals. # The dispatcher is configured using the DISPATCHER_EMAIL setting, which # defaults to ADMIN_EMAIL. ERROR_MESSAGES_TO = 'user' # Send nosy messages to the author of the message MESSAGES_TO_AUTHOR = 'no' # either 'yes' or 'no' # Does the author of a message get placed on the nosy list automatically? # If 'new' is used, then the author will only be added when a message # creates a new issue. If 'yes', then the author will be added on followups # too. If 'no', they're never added to the nosy. ADD_AUTHOR_TO_NOSY = 'new' # one of 'yes', 'no', 'new' # Do the recipients (To:, Cc:) of a message get placed on the nosy list? # If 'new' is used, then the recipients will only be added when a message # creates a new issue. If 'yes', then the recipients will be added on followups # too. If 'no', they're never added to the nosy. ADD_RECIPIENTS_TO_NOSY = 'new' # either 'yes', 'no', 'new' # Where to place the email signature EMAIL_SIGNATURE_POSITION = 'bottom' # one of 'top', 'bottom', 'none' # Keep email citations when accepting messages. Setting this to "no" strips # out "quoted" text from the message. Signatures are also stripped. EMAIL_KEEP_QUOTED_TEXT = 'yes' # either 'yes' or 'no' # Preserve the email body as is - that is, keep the citations _and_ # signatures. EMAIL_LEAVE_BODY_UNCHANGED = 'no' # either 'yes' or 'no' # Default class to use in the mailgw if one isn't supplied in email # subjects. To disable, comment out the variable below or leave it blank. # Examples: MAIL_DEFAULT_CLASS = 'issue' # use "issue" class by default #MAIL_DEFAULT_CLASS = '' # disable (or just comment the var out) # HTML version to generate. The templates are html4 by default. If you # wish to make them xhtml, then you'll need to change this var to 'xhtml' # too so all auto-generated HTML is compliant. HTML_VERSION = 'html4' # either 'html4' or 'xhtml' # Character set to encode email headers with. We use utf-8 by default, as # it's the most flexible. Some mail readers (eg. Eudora) can't cope with # that, so you might need to specify a more limited character set (eg. # 'iso-8859-1'. EMAIL_CHARSET = 'utf-8' #EMAIL_CHARSET = 'iso-8859-1' # use this instead for Eudora users # You may specify a different default timezone, for use when users do not # choose their own in their settings. DEFAULT_TIMEZONE = 0 # specify as numeric hour offest # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/dbinit.py0000644000000000000000000001674010066407753017353 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: dbinit.py,v 1.8 2004-05-02 23:16:05 richard Exp $ import os import config from select_db import Database, Class, FileClass, IssueClass def open(name=None): ''' as from the roundupdb method openDB ''' from roundup.hyperdb import String, Password, Date, Link, Multilink from roundup.hyperdb import Interval, Boolean, Number # open the database db = Database(config, name) # # Now initialise the schema. Must do this each time the database is # opened. # # Class automatically gets these properties: # creation = Date() # activity = Date() # creator = Link('user') pri = Class(db, "priority", name=String(), order=String()) pri.setkey("name") stat = Class(db, "status", name=String(), order=String()) stat.setkey("name") keyword = Class(db, "keyword", name=String()) keyword.setkey("name") query = Class(db, "query", klass=String(), name=String(), url=String(), private_for=Link('user')) # add any additional database schema configuration here # Note: roles is a comma-separated string of Role names user = Class(db, "user", username=String(), password=Password(), address=String(), realname=String(), phone=String(), organisation=String(), alternate_addresses=String(), queries=Multilink('query'), roles=String(), timezone=String()) user.setkey("username") # FileClass automatically gets these properties: # content = String() [saved to disk in /db/files/] # (it also gets the Class properties creation, activity and creator) msg = FileClass(db, "msg", author=Link("user", do_journal='no'), recipients=Multilink("user", do_journal='no'), date=Date(), summary=String(), files=Multilink("file"), messageid=String(), inreplyto=String()) file = FileClass(db, "file", name=String(), type=String()) # IssueClass automatically gets these properties: # title = String() # messages = Multilink("msg") # files = Multilink("file") # nosy = Multilink("user") # superseder = Multilink("issue") # (it also gets the Class properties creation, activity and creator) issue = IssueClass(db, "issue", assignedto=Link("user"), topic=Multilink("keyword"), priority=Link("priority"), status=Link("status")) # # SECURITY SETTINGS # # See the configuration and customisation document for information # about security setup. # Assign the access and edit Permissions for issue, file and message # to regular users now for cl in 'issue', 'file', 'msg', 'query', 'keyword': p = db.security.getPermission('View', cl) db.security.addPermissionToRole('User', p) p = db.security.getPermission('Edit', cl) db.security.addPermissionToRole('User', p) for cl in 'priority', 'status': p = db.security.getPermission('View', cl) db.security.addPermissionToRole('User', p) # and give the regular users access to the web and email interface p = db.security.getPermission('Web Access') db.security.addPermissionToRole('User', p) p = db.security.getPermission('Email Access') db.security.addPermissionToRole('User', p) # May users view other user information? Comment these lines out # if you don't want them to p = db.security.getPermission('View', 'user') db.security.addPermissionToRole('User', p) # Assign the appropriate permissions to the anonymous user's Anonymous # Role. Choices here are: # - Allow anonymous users to register through the web p = db.security.getPermission('Web Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous (new) users to register through the email gateway p = db.security.getPermission('Email Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to view issues (which implies being # able to view all linked information too for cl in 'issue', 'file', 'msg', 'keyword', 'priority', 'status': p = db.security.getPermission('View', cl) db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to edit the "issue" class of data # Note: this also grants access to create related information like # files and messages etc that are linked to issues #p = db.security.getPermission('Edit', 'issue') #db.security.addPermissionToRole('Anonymous', p) # oh, g'wan, let anonymous access the web interface too p = db.security.getPermission('Web Access') db.security.addPermissionToRole('Anonymous', p) import detectors detectors.init(db) # schema is set up - run any post-initialisation db.post_init() return db def init(adminpw): '''Invoked by the "roundup-admin initialise" command to set up the initial state of the hyperdb. If you wish to change the hyperdb *after* running that command, see the customisation doc "Database Content" section. ''' dbdir = os.path.join(config.DATABASE, 'files') if not os.path.isdir(dbdir): os.makedirs(dbdir) db = open("admin") db.clear() # # INITIAL PRIORITY AND STATUS VALUES # pri = db.getclass('priority') pri.create(name="critical", order="1") pri.create(name="urgent", order="2") pri.create(name="bug", order="3") pri.create(name="feature", order="4") pri.create(name="wish", order="5") stat = db.getclass('status') stat.create(name="unread", order="1") stat.create(name="deferred", order="2") stat.create(name="chatting", order="3") stat.create(name="need-eg", order="4") stat.create(name="in-progress", order="5") stat.create(name="testing", order="6") stat.create(name="done-cbb", order="7") stat.create(name="resolved", order="8") # create the two default users user = db.getclass('user') user.create(username="admin", password=adminpw, address=config.ADMIN_EMAIL, roles='Admin') user.create(username="anonymous", roles='Anonymous') # add any additional database create steps here - but only if you # haven't initialised the database with the admin "initialise" command db.commit() db.close() # vim: set filetype=python ts=4 sw=4 et si #SHA: 92c54c05ba9f59453dc74fa9fdbbae34f7a9c077 code-ea7fb2f416db/templates/classic/detectors/.cvsignore0000644000000000000000000000002410066407753021510 0ustar 00000000000000*.pyc *.pyo *.cover code-ea7fb2f416db/templates/classic/detectors/__init__.py0000644000000000000000000000310210066407753021621 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: __init__.py,v 1.4 2003-10-07 06:18:45 richard Exp $ import sys, os, imp def init(db): ''' execute the init functions of all the modules in this directory ''' this_dir = os.path.split(__file__)[0] for filename in os.listdir(this_dir): name, ext = os.path.splitext(filename) if name == '__init__': continue if ext == '.py': path = os.path.abspath(os.path.join(this_dir, filename)) fp = open(path) try: module = imp.load_module(name, fp, path, ('.py', 'r', imp.PY_SOURCE)) finally: fp.close() module.init(db) # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/detectors/messagesummary.py0000644000000000000000000000105310066407753023127 0ustar 00000000000000#$Id: messagesummary.py,v 1.1 2003-04-17 03:26:38 richard Exp $ from roundup.mailgw import parseContent def summarygenerator(db, cl, nodeid, newvalues): ''' If the message doesn't have a summary, make one for it. ''' if newvalues.has_key('summary') or not newvalues.has_key('content'): return summary, content = parseContent(newvalues['content'], 1, 1) newvalues['summary'] = summary def init(db): # fire before changes are made db.msg.audit('create', summarygenerator) # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/detectors/nosyreaction.py0000644000000000000000000001275310066407753022613 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: nosyreaction.py,v 1.2 2003-09-04 00:47:01 richard Exp $ from roundup import roundupdb, hyperdb def nosyreaction(db, cl, nodeid, oldvalues): ''' A standard detector is provided that watches for additions to the "messages" property. When a new message is added, the detector sends it to all the users on the "nosy" list for the issue that are not already on the "recipients" list of the message. Those users are then appended to the "recipients" property on the message, so multiple copies of a message are never sent to the same user. The journal recorded by the hyperdatabase on the "recipients" property then provides a log of when the message was sent to whom. ''' # send a copy of all new messages to the nosy list for msgid in determineNewMessages(cl, nodeid, oldvalues): try: cl.nosymessage(nodeid, msgid, oldvalues) except roundupdb.MessageSendError, message: raise roundupdb.DetectorError, message def determineNewMessages(cl, nodeid, oldvalues): ''' Figure a list of the messages that are being added to the given node in this transaction. ''' messages = [] if oldvalues is None: # the action was a create, so use all the messages in the create messages = cl.get(nodeid, 'messages') elif oldvalues.has_key('messages'): # the action was a set (so adding new messages to an existing issue) m = {} for msgid in oldvalues['messages']: m[msgid] = 1 messages = [] # figure which of the messages now on the issue weren't there before for msgid in cl.get(nodeid, 'messages'): if not m.has_key(msgid): messages.append(msgid) return messages def updatenosy(db, cl, nodeid, newvalues): '''Update the nosy list for changes to the assignedto ''' # nodeid will be None if this is a new node current = {} if nodeid is None: ok = ('new', 'yes') else: ok = ('yes',) # old node, get the current values from the node if they haven't # changed if not newvalues.has_key('nosy'): nosy = cl.get(nodeid, 'nosy') for value in nosy: if not current.has_key(value): current[value] = 1 # if the nosy list changed in this transaction, init from the new value if newvalues.has_key('nosy'): nosy = newvalues.get('nosy', []) for value in nosy: if not db.hasnode('user', value): continue if not current.has_key(value): current[value] = 1 # add assignedto(s) to the nosy list if newvalues.has_key('assignedto') and newvalues['assignedto'] is not None: propdef = cl.getprops() if isinstance(propdef['assignedto'], hyperdb.Link): assignedto_ids = [newvalues['assignedto']] elif isinstance(propdef['assignedto'], hyperdb.Multilink): assignedto_ids = newvalues['assignedto'] for assignedto_id in assignedto_ids: if not current.has_key(assignedto_id): current[assignedto_id] = 1 # see if there's any new messages - if so, possibly add the author and # recipient to the nosy if newvalues.has_key('messages'): if nodeid is None: ok = ('new', 'yes') messages = newvalues['messages'] else: ok = ('yes',) # figure which of the messages now on the issue weren't # there before oldmessages = cl.get(nodeid, 'messages') messages = [] for msgid in newvalues['messages']: if msgid not in oldmessages: messages.append(msgid) # configs for nosy modifications add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new') add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new') # now for each new message: msg = db.msg for msgid in messages: if add_author in ok: authid = msg.get(msgid, 'author') current[authid] = 1 # add on the recipients of the message if add_recips in ok: for recipient in msg.get(msgid, 'recipients'): current[recipient] = 1 # that's it, save off the new nosy list newvalues['nosy'] = current.keys() def init(db): db.issue.react('create', nosyreaction) db.issue.react('set', nosyreaction) db.issue.audit('create', updatenosy) db.issue.audit('set', updatenosy) # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/detectors/statusauditor.py0000644000000000000000000000562110066407753023005 0ustar 00000000000000# Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: statusauditor.py,v 1.5 2004-03-27 00:01:48 richard Exp $ def chatty(db, cl, nodeid, newvalues): ''' If the issue is currently 'unread', 'resolved', 'done-cbb' or None, then set it to 'chatting' ''' # don't fire if there's no new message (ie. chat) if not newvalues.has_key('messages'): return if newvalues['messages'] == cl.get(nodeid, 'messages'): return # get the chatting state ID try: chatting_id = db.status.lookup('chatting') except KeyError: # no chatting state, ignore all this stuff return # get the current value current_status = cl.get(nodeid, 'status') # see if there's an explicit change in this transaction if newvalues.has_key('status'): # yep, skip return # determine the id of 'unread', 'resolved' and 'chatting' fromstates = [] for state in 'unread resolved done-cbb'.split(): try: fromstates.append(db.status.lookup(state)) except KeyError: pass # ok, there's no explicit change, so check if we are in a state that # should be changed if current_status in fromstates + [None]: # yep, we're now chatting newvalues['status'] = chatting_id def presetunread(db, cl, nodeid, newvalues): ''' Make sure the status is set on new issues ''' if newvalues.has_key('status') and newvalues['status']: return # get the unread state ID try: unread_id = db.status.lookup('unread') except KeyError: # no unread state, ignore all this stuff return # ok, do it newvalues['status'] = unread_id def init(db): # fire before changes are made db.issue.audit('set', chatty) db.issue.audit('create', presetunread) # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/detectors/userauditor.py0000644000000000000000000000364410066407753022443 0ustar 00000000000000# Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: userauditor.py,v 1.2 2003-11-11 22:25:37 richard Exp $ def audit_user_fields(db, cl, nodeid, newvalues): ''' Make sure user properties are valid. - email address has no spaces in it - roles specified exist ''' if newvalues.has_key('address') and ' ' in newvalues['address']: raise ValueError, 'Email address must not contain spaces' if newvalues.has_key('roles'): roles = [x.lower().strip() for x in newvalues['roles'].split(',')] for rolename in roles: if not db.security.role.has_key(rolename): raise ValueError, 'Role "%s" does not exist'%rolename def init(db): # fire before changes are made db.user.audit('set', audit_user_fields) db.user.audit('create', audit_user_fields) # vim: set filetype=python ts=4 sw=4 et si code-ea7fb2f416db/templates/classic/html/_generic.collision.html0000644000000000000000000000136710066407753023126 0ustar 00000000000000 <span tal:replace="python:context._classname.capitalize()" i18n:name="class" /> Edit Collision - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> Edit Collision code-ea7fb2f416db/templates/classic/html/_generic.help.html0000644000000000000000000000726110066407753022062 0ustar 00000000000000 <span i18n:name="property" tal:replace="property" /> help - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" />
 x
 x
<< previous   .. out of next >>  
code-ea7fb2f416db/templates/classic/html/_generic.index.html0000644000000000000000000000424610066407753022241 0ustar 00000000000000 <span tal:replace="python:context._classname.capitalize()" i18n:name="class" /> editing - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> editing You are not allowed to view this page.

You may edit the contents of the class using this form. Commas, newlines and double quotes (") must be handled delicately. You may include commas and newlines by enclosing the values in double-quotes ("). Double quotes themselves must be quoted by doubling ("").

Multilink properties have their multiple values colon (":") separated (... ,"one:two:three", ...)

Remove entries by deleting their line. Add new entries by appending them to the table - put an X in the id column.


 
 
code-ea7fb2f416db/templates/classic/html/_generic.item.html0000644000000000000000000000360610066407753022067 0ustar 00000000000000 <span tal:replace="python:context._classname.capitalize()" i18n:name="class" /> editing - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> editing You are not allowed to view this page.
  submit button will go here
code-ea7fb2f416db/templates/classic/html/file.index.html0000644000000000000000000000204610066407753021401 0ustar 00000000000000 List of files - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /> List of files
Download Content Type Uploaded By Date
dld link content type creator's name creation date
code-ea7fb2f416db/templates/classic/html/file.item.html0000644000000000000000000000354510066407753021235 0ustar 00000000000000 File display - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> File display You are not allowed to view this page.
Name
Content Type
  submit button here
download
Name
Content Type
code-ea7fb2f416db/templates/classic/html/help_controls.js0000644000000000000000000000613310066407753021700 0ustar 00000000000000// initial values for either Nosy, Superseder, Topic and Waiting On, // depending on which has called original_field = window.opener.document.itemSynopsis[field].value; // Some browsers (ok, IE) don't define the "undefined" variable. undefined = document.geez_IE_is_really_friggin_annoying; function trim(value) { var temp = value; var obj = /^(\s*)([\W\w]*)(\b\s*$)/; if (obj.test(temp)) { temp = temp.replace(obj, '$2'); } var obj = / /g; while (temp.match(obj)) { temp = temp.replace(obj, " "); } return temp; } function determineList() { // generate a comma-separated list of the checked items var list = new String(''); for (box=0; box < document.frm_help.check.length; box++) { if (document.frm_help.check[box].checked) { if (list.length == 0) { separator = ''; } else { separator = ','; } // we used to use an Array and push / join, but IE5.0 sux list = list + separator + document.frm_help.check[box].value; } } return list; } function updateList() { // write back to opener window if (document.frm_help.check==undefined) { return; } window.opener.document.itemSynopsis[field].value = determineList(); } function updatePreview() { // update the preview box if (document.frm_help.check==undefined) { return; } writePreview(determineList()); } function clearList() { // uncheck all checkboxes if (document.frm_help.check==undefined) { return; } for (box=0; box < document.frm_help.check.length; box++) { document.frm_help.check[box].checked = false; } } function reviseList(vals) { // update the checkboxes based on the preview field if (document.frm_help.check==undefined) { return; } var to_check; var list = vals.split(","); if (document.frm_help.check.length==undefined) { check = document.frm_help.check; to_check = false; for (val in list) { if (check.value==trim(list[val])) { to_check = true; break; } } check.checked = to_check; } else { for (box=0; box < document.frm_help.check.length; box++) { check = document.frm_help.check[box]; to_check = false; for (val in list) { if (check.value==trim(list[val])) { to_check = true; break; } } check.checked = to_check; } } } function resetList() { // reset preview and check boxes to initial values if (document.frm_help.check==undefined) { return; } writePreview(original_field); reviseList(original_field); } function writePreview(val) { // writes a value to the text_preview document.frm_help.text_preview.value = val; } function focusField(name) { for(i=0; i < document.forms.length; ++i) { var obj = document.forms[i].elements[name]; if (obj && obj.focus) {obj.focus();} } } function selectField(name) { for(i=0; i < document.forms.length; ++i) { var obj = document.forms[i].elements[name]; if (obj && obj.focus){obj.focus();} if (obj && obj.select){obj.select();} } } code-ea7fb2f416db/templates/classic/html/home.classlist.html0000644000000000000000000000140410066407753022301 0ustar 00000000000000 List of classes - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> List of classes
classname
name type
code-ea7fb2f416db/templates/classic/html/home.html0000644000000000000000000000105510066407753020303 0ustar 00000000000000 code-ea7fb2f416db/templates/classic/html/issue.index.html0000644000000000000000000001274210066407753021616 0ustar 00000000000000 List of issues - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /> List of issues You are not allowed to view this page.
Priority ID Creation Activity Actor Topic Title Status Creator Assigned To
            title      
<< previous   .. out of next >>  
Download as CSV
Sort on: Descending:
Group on: Descending:
code-ea7fb2f416db/templates/classic/html/issue.item.html0000644000000000000000000001403410066407753021441 0ustar 00000000000000 <tal:block condition="context/id" i18n:translate="" >Issue <span tal:replace="context/id" i18n:name="id" />: <span tal:replace="context/title" i18n:name="title" /> - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /></tal:block> <tal:block condition="not:context/id" i18n:translate="" >New Issue - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /></tal:block> New Issue New Issue Editing Issue Issue Editing
Title title
Priority priority Status status
Superseder
View: 		Nosy List
Assigned To assignedto menu Topics
Change Note
File
  submit button will go here
Note:  highlighted  fields are required.

activity info

Files
File name Uploaded Type Edit Remove
dld link creator's name, creation date edit
Messages
author date 
content
code-ea7fb2f416db/templates/classic/html/issue.search.html0000644000000000000000000001472110066407753021753 0ustar 00000000000000 Issue searching - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> Issue searching
  Filter on Display Sort on Group on
All text*:      
Title:  
Topic:
ID:  
Creation Date:
Creator:
Activity:  
Actor:  
Priority:
Status:
Assigned to:
Pagesize:
Start With:
Sort Descending:
Group Descending:
Query name**:
 
  *: The "all text" field will look in message bodies and issue titles
**: If you supply a name, the query will be saved off and available as a link in the sidebar
code-ea7fb2f416db/templates/classic/html/keyword.item.html0000644000000000000000000000341110066407753021772 0ustar 00000000000000 Keyword editing - <span i18n:name="tracker" tal:replace="config/TRACKER_NAME" /> Keyword editing
Existing Keywords
keyword here
To edit an existing keyword (for spelling or typing errors), click on its entry above.

To create a new keyword, enter it below and click "Submit New Entry".

Keyword name
  submit button will go here
code-ea7fb2f416db/templates/classic/html/msg.index.html0000644000000000000000000000141610066407753021250 0ustar 00000000000000 List of messages - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker"/> Message listing
Messages
author date 
content
code-ea7fb2f416db/templates/classic/html/msg.item.html0000644000000000000000000000446510066407753021106 0ustar 00000000000000 <tal:block condition="context/id" i18n:translate="" >Message <span tal:replace="context/id" i18n:name="id" /> - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /></tal:block> <tal:block condition="not:context/id" i18n:translate="" >New Message - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" /></tal:block> New Message New Message Editing Message Message Editing
Author
Recipients
Date
Content

 






 
Files

 

  File name
  Uploaded
 

 

  
   dld link
  
  
   creator's name,
   creation date
  
 








code-ea7fb2f416db/templates/classic/html/page.html0000644000000000000000000001716710066407753020302 0ustar  00000000000000



title goes here












  
 
  
body title

 		





 
  

   Your Queries (edit)

   
    link

   
  


  

   

    Issues

    Create New

    Show Unassigned

    Show All

    Search

    
    
    
   

  


  

   Keywords

   Create New

   Edit Existing

  


  

   Administration

   
    Class List

   
   User List

   Add User
  


  

   

    Login

    

    

    
    

    
    Register

    Lost your login?

   

  


  

   Hello, username

   My Issues

   My Details

   Logout
  

  

   Help

   Roundup docs
  

 		
 
  
error

  
error

 		




 Page content goes here















  



  
  
  



  



 
    
 
  • 
  
  
    • 
 
  • 
  
  
 
    • 
 




  



  



  


code-ea7fb2f416db/templates/classic/html/query.edit.html0000644000000000000000000000704010066407753021444 0ustar  00000000000000

"Your Queries" Editing - <span tal:replace="config/TRACKER_NAME"
 i18n:name="tracker" />
"Your Queries" Editing



You are not allowed to edit queries.








 



Query
    Include in "Your Queries"
    Edit
    Private to you?
     





 query

 
  
  
 

 [query is retired]

 
 





 query

 

 edit

 
  
 

 
  
  





 query

 
 [not yours to edit]





        
        
        










code-ea7fb2f416db/templates/classic/html/query.item.html0000644000000000000000000000011610066407753021452 0ustar  00000000000000


code-ea7fb2f416db/templates/classic/html/style.css0000644000000000000000000001466510066407753020352 0ustar  00000000000000/* main page styles */
body.body {
  font-family: sans-serif, Arial, Helvetica;
  background-color: white;
  color: #333;
  margin: 0;
}
a[href]:hover {
  color:blue;
  text-decoration: underline;
}
a[href], a[href]:link {
  color:blue;
  text-decoration: none;
}

table.body {
  border: 0;
  padding: 0;
  border-spacing: 0;
  border-collapse: separate;
}

td.page-header-left {
  padding: 5px;
  border-bottom: 1px solid #444;
}
td.sidebar {
  padding: 1px 0 0 1px;
  white-space: nowrap;
}

/* don't display the sidebar when printing */
@media print {
    td.page-header-left {
        display: none;
    }
    td.sidebar {
        display: none;
    }
    .index-controls {
        display: none;
    }
}

td.page-header-top {
  padding: 5px;
  border-bottom: 1px solid #444;
}

form {
  margin: 0;
}

textarea {
    font-family: monospace;
}

td.sidebar p.classblock {
  padding: 2px 5px 2px 5px;
  margin: 1px;
  border: 1px solid #444;
  background-color: #eee;
}

td.sidebar p.userblock {
  padding: 2px 5px 2px 5px;
  margin: 1px 1px 1px 1px;
  border: 1px solid #444;
  background-color: #eef;
}

td.content {
  padding: 1px 5px 1px 5px;
  vertical-align: top;
  width: 100%;
}

td.date, th.date { 
  white-space: nowrap;
}

p.ok-message {
  background-color: #22bb22;
  padding: 5px;
  color: white;
  font-weight: bold;
}
p.error-message {
  background-color: #bb2222;
  padding: 5px;
  color: white;
  font-weight: bold;
}


/* style for search forms */
ul.search-checkboxes {
    display: inline;
    padding: none;
    list-style: none;
}
ul.search-checkboxes > li {
    display: inline;
    padding-right: .5em;
}


/* style for forms */
table.form {
  padding: 2px;
  border-spacing: 0;
  border-collapse: separate;
}

table.form th {
  color: #338;
  text-align: right;
  vertical-align: top;
  font-weight: normal;
  white-space: nowrap;
}

table.form th.header {
  font-weight: bold;
  background-color: #eef;
  text-align: left;
}

table.form th.required {
  font-weight: bold;
}

table.form td {
  color: #333;
  empty-cells: show;
  vertical-align: top;
}

table.form td.optional {
  font-weight: bold;
  font-style: italic;
}

table.form td.html {
  color: #777;
}

/* style for lists */
table.list {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.list th {
  padding: 0 4px 0 4px;
  color: #404070;
  background-color: #eef;
  border: 1px solid white;
  vertical-align: top;
  empty-cells: show;
}
table.list th a[href]:hover { color: #404070 }
table.list th a[href]:link { color: #404070 }
table.list th a[href] { color: #404070 }
table.list th.group {
  background-color: #f4f4ff;
  text-align: center;
}

table.list td {
  padding: 0 4px 0 4px;
  border: 1px solid white;
  color: #404070;
  background-color: #efefef;
  vertical-align: top;
  empty-cells: show;
}

table.list tr.navigation th {
  width: 33%;
  border-style: hidden;
  text-align: center;
}
table.list tr.navigation td {
    border: none
}
table.list tr.navigation th:first-child {
  text-align: left;
}
table.list tr.navigation th:last-child {
  text-align: right;
}


/* style for message displays */
table.messages {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.messages th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.messages th {
  font-weight: bold;
  color: black;
  text-align: left;
  border-bottom: 1px solid #afafaf;
}

table.messages td {
  font-family: monospace;
  background-color: #efefef;
  border-bottom: 1px solid #afafaf;
  color: black;
  empty-cells: show;
  border-right: 1px solid #afafaf;
  vertical-align: top;
  padding: 2px 5px 2px 5px;
}

table.messages td:first-child {
  border-left: 1px solid #afafaf;
  border-right: 1px solid #afafaf;
}

/* style for file displays */
table.files {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.files th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.files th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}

table.files td {
  font-family: monospace;
  empty-cells: show;
}

/* style for history displays */
table.history {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.history th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
  font-size: 100%;
}

table.history th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
  font-size: 90%;
}

table.history td {
  font-size: 90%;
  vertical-align: top;
  empty-cells: show;
}


/* style for class list */
table.classlist {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.classlist th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.classlist th {
  font-weight: bold;
  text-align: left;
}


/* style for class help display */
table.classhelp {      /* the table-layout: fixed;        */ 
  table-layout: fixed; /* compromises quality for speed   */
  overflow: hidden;
  font-size: .9em;
  padding-bottom: 3em;
}

table.classhelp th {
  font-weight: normal;
  text-align: left;
  color: #444;
  background-color: #efefef;
  border-bottom: 1px solid #afafaf;
  border-top: 1px solid #afafaf;
  text-transform: uppercase;
  vertical-align: middle;
  line-height:1.5em;
}

table.classhelp td {
  vertical-align: middle;
  padding-right: .2em;
  border-bottom: 1px solid #efefef;
  text-align: left;
  empty-cells: show;
  white-space: nowrap;
  vertical-align: middle;
}

table.classhelp tr:hover {
  background-color: #eee;
}

label.classhelp-label {
  cursor: pointer;
}

#classhelp-controls {
  position: fixed;
  display: block;
  top: auto;
  right: 0;
  bottom: 0;
  left: 0;
  padding: .5em;
  border-top: 2px solid #444;
  background-color: #eee;
}

#classhelp-controls input.apply {
  width: 7em;
  font-weight: bold;
  margin-right: 2em;
  margin-left: 2em;
}

#classhelp-controls input.preview {
   margin-right: 3em;
   margin-left: 1em;
}

/* style for "other" displays */
table.otherinfo {
  border-spacing: 0;
  border-collapse: separate;
  width: 100%;
}

table.otherinfo th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.otherinfo th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}
code-ea7fb2f416db/templates/classic/html/user.forgotten.html0000644000000000000000000000310710066407753022337 0ustar  00000000000000

Password reset request - <span
 i18n:name="tracker" tal:replace="config/TRACKER_NAME" />
Password reset request



You have two options if you have forgotten your password.
If you know the email address you registered with, enter it below.




    

      

        Email Address:
        
      

      

         
        
          
          
          
        
      





Or, if you know your username, then enter it below.




 
Username:  

 







A confirmation email will be sent to you -
please follow the instructions within it to complete the reset process.




code-ea7fb2f416db/templates/classic/html/user.index.html0000644000000000000000000000305410066407753021440 0ustar  00000000000000

User listing - <span
 i18n:name="tracker" tal:replace="config/TRACKER_NAME" />
User listing


You are not allowed to view this page.





 Username
 Real name
 Organisation
 Email address
 Phone number
 Retire




 
  username
 
  
  
  
  
 
  retire
 







code-ea7fb2f416db/templates/classic/html/user.item.html0000644000000000000000000000673710066407753021302 0ustar  00000000000000


<tal:block condition="context/id" i18n:translate=""
 >User <span tal:replace="context/id" i18n:name="id"
 />: <span tal:replace="context/username" i18n:name="title"
 /> - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker"
/></tal:block>
<tal:block condition="not:context/id" i18n:translate=""
 >New User - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker"
/></tal:block>


 New User
 New User Editing
 User
 User Editing









 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Confirm Password
  password
 

 

  Roles
  
   
   
   (to give the user more than one role,
    enter a comma,separated,list)
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  Timezone
  
   
   (this is a numeric hour offset, the default is
    )
  
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

  
    
   
   
  
  submit button here
 











code-ea7fb2f416db/templates/classic/html/user.register.html0000644000000000000000000000517110066407753022157 0ustar  00000000000000

Registering with <span i18n:name="tracker"
 tal:replace="db/config/TRACKER_NAME" />
Registering with 




You are not allowed to view this page.







 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Confirm Password
  password
 

 

  Roles
  roles
  
   
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

   
  
   
   
   
   
  
 













code-ea7fb2f416db/templates/classic/html/user.rego_progress.html0000644000000000000000000000117310066407753023211 0ustar  00000000000000

Registration in progress - <span i18n:name="tracker"
 tal:replace="config/TRACKER_NAME" />
Registration in progress...



You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.





code-ea7fb2f416db/templates/classic/interfaces.py0000644000000000000000000000276110066407753020223 0ustar  00000000000000#
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE.  THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
# 
# $Id: interfaces.py,v 1.1 2003-04-17 03:26:03 richard Exp $

from roundup import mailgw 
from roundup.cgi import client

class Client(client.Client): 
    ''' derives basic CGI implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

class TemplatingUtils:
    ''' Methods implemented on this class will be available to HTML templates
        through the 'utils' variable.
    '''
    pass

class MailGW(mailgw.MailGW): 
    ''' derives basic mail gateway implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

# vim: set filetype=python ts=4 sw=4 et si