code-c3e391d9c4e9/roundup/templates/classic/.cvsignore0000644000000000000000000000004007535063756021072 0ustar 00000000000000*.pyc *.pyo htmlbase.py *.cover code-c3e391d9c4e9/roundup/templates/classic/__init__.py0000644000000000000000000000410507535063756021211 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.5 2001-08-07 00:24:43 richard Exp $ import sys from instance_config import * try: from dbinit import * except: pass # in install dir (probably :) from interfaces import * # # $Log: not supported by cvs2svn $ # Revision 1.4 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.3 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.2 2001/07/24 10:46:22 anthonybaxter # Added templatebuilder module. two functions - one to pack up the html base, # one to unpack it. Packed up the two standard templates into htmlbases. # Modified __init__ to install them. # # __init__.py magic was needed for the rather high levels of wierd import magic. # Reducing level of import magic == (good, future) # # Revision 1.1 2001/07/23 23:28:43 richard # Adding the classic template # # Revision 1.3 2001/07/23 23:16:01 richard # Split off the interfaces (CGI, mailgw) into a separate file from the DB stuff. # # Revision 1.2 2001/07/23 04:33:21 anthonybaxter # split __init__.py into 2. dbinit and instance_config. # # # vim: set filetype=python ts=4 sw=4 et si code-c3e391d9c4e9/roundup/templates/classic/dbinit.py0000644000000000000000000003553007535063756020731 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: dbinit.py,v 1.25 2002-09-02 07:00:22 richard Exp $ import os import instance_config from select_db import Database, Class, FileClass, IssueClass def open(name=None): ''' as from the roundupdb method openDB ''' from roundup.hyperdb import String, Password, Date, Link, Multilink # open the database db = Database(instance_config, name) # # Now initialise the schema. Must do this each time the database is # opened. # # Class automatically gets these properties: # creation = Date() # activity = Date() # creator = Link('user') pri = Class(db, "priority", name=String(), order=String()) pri.setkey("name") stat = Class(db, "status", name=String(), order=String()) stat.setkey("name") keyword = Class(db, "keyword", name=String()) keyword.setkey("name") query = Class(db, "query", klass=String(), name=String(), url=String()) query.setkey("name") # Note: roles is a comma-separated string of Role names user = Class(db, "user", username=String(), password=Password(), address=String(), realname=String(), phone=String(), organisation=String(), alternate_addresses=String(), queries=Multilink('query'), roles=String()) user.setkey("username") # FileClass automatically gets these properties: # content = String() [saved to disk in /db/files/] # (it also gets the Class properties creation, activity and creator) msg = FileClass(db, "msg", author=Link("user", do_journal='no'), recipients=Multilink("user", do_journal='no'), date=Date(), summary=String(), files=Multilink("file"), messageid=String(), inreplyto=String()) file = FileClass(db, "file", name=String(), type=String()) # IssueClass automatically gets these properties: # title = String() # messages = Multilink("msg") # files = Multilink("file") # nosy = Multilink("user") # superseder = Multilink("issue") # (it also gets the Class properties creation, activity and creator) issue = IssueClass(db, "issue", assignedto=Link("user"), topic=Multilink("keyword"), priority=Link("priority"), status=Link("status")) # # SECURITY SETTINGS # # new permissions for this schema for cl in 'issue', 'file', 'msg', 'user': db.security.addPermission(name="Edit", klass=cl, description="User is allowed to edit "+cl) db.security.addPermission(name="View", klass=cl, description="User is allowed to access "+cl) # Assign the access and edit permissions for issue, file and message # to regular users now for cl in 'issue', 'file', 'msg': p = db.security.getPermission('View', cl) db.security.addPermissionToRole('User', p) p = db.security.getPermission('Edit', cl) db.security.addPermissionToRole('User', p) # and give the regular users access to the web and email interface p = db.security.getPermission('Web Access') db.security.addPermissionToRole('User', p) p = db.security.getPermission('Email Access') db.security.addPermissionToRole('User', p) # May users view other user information? Comment these lines out # if you don't want them to p = db.security.getPermission('View', 'user') db.security.addPermissionToRole('User', p) # Assign the appropriate permissions to the anonymous user's Anonymous # Role. Choices here are: # - Allow anonymous users to register through the web p = db.security.getPermission('Web Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous (new) users to register through the email gateway p = db.security.getPermission('Email Registration') db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to the "issue" class of data # Note: this also grants access to related information like files, # messages, statuses etc that are linked to issues #p = db.security.getPermission('View', 'issue') #db.security.addPermissionToRole('Anonymous', p) # - Allow anonymous users access to edit the "issue" class of data # Note: this also grants access to create related information like # files and messages etc that are linked to issues #p = db.security.getPermission('Edit', 'issue') #db.security.addPermissionToRole('Anonymous', p) # oh, g'wan, let anonymous access the web interface too p = db.security.getPermission('Web Access') db.security.addPermissionToRole('Anonymous', p) import detectors detectors.init(db) # schema is set up - run any post-initialisation db.post_init() return db def init(adminpw): ''' as from the roundupdb method initDB Open the new database, and add new nodes - used for initialisation. You can edit this before running the "roundup-admin initialise" command to change the initial database entries. ''' dbdir = os.path.join(instance_config.DATABASE, 'files') if not os.path.isdir(dbdir): os.makedirs(dbdir) db = open("admin") db.clear() # # INITIAL PRIORITY AND STATUS VALUES # pri = db.getclass('priority') pri.create(name="critical", order="1") pri.create(name="urgent", order="2") pri.create(name="bug", order="3") pri.create(name="feature", order="4") pri.create(name="wish", order="5") stat = db.getclass('status') stat.create(name="unread", order="1") stat.create(name="deferred", order="2") stat.create(name="chatting", order="3") stat.create(name="need-eg", order="4") stat.create(name="in-progress", order="5") stat.create(name="testing", order="6") stat.create(name="done-cbb", order="7") stat.create(name="resolved", order="8") # create the two default users user = db.getclass('user') user.create(username="admin", password=adminpw, address=instance_config.ADMIN_EMAIL, roles='Admin') user.create(username="anonymous", roles='Anonymous') db.commit() # # $Log: not supported by cvs2svn $ # Revision 1.24 2002/09/01 04:32:30 richard # . Lots of cleanup in the classic html (stylesheet, search page, index page, ...) # . Reinstated searching, but not query saving yet # . Filtering only allows sorting and grouping by one property - all backends # now implement this behaviour. # . Nosy list journalling turned off by default, everything else is on. # . Added some convenience methods (reverse, propchanged, [item] accesses, ...) # . Did I mention the stylesheet is much cleaner now? :) # # Revision 1.23 2002/08/30 08:30:45 richard # allow perms on user class # # Revision 1.22 2002/08/01 00:56:22 richard # Added the web access and email access permissions, so people can restrict # access to users who register through the email interface (for example). # Also added "security" command to the roundup-admin interface to display the # Role/Permission config for an instance. # # Revision 1.21 2002/07/26 08:26:59 richard # Very close now. The cgi and mailgw now use the new security API. The two # templates have been migrated to that setup. Lots of unit tests. Still some # issue in the web form for editing Roles assigned to users. # # Revision 1.20 2002/07/17 12:39:10 gmcm # Saving, running & editing queries. # # Revision 1.19 2002/07/14 02:05:54 richard # . all storage-specific code (ie. backend) is now implemented by the backends # # Revision 1.18 2002/07/09 03:02:53 richard # More indexer work: # - all String properties may now be indexed too. Currently there's a bit of # "issue" specific code in the actual searching which needs to be # addressed. In a nutshell: # + pass 'indexme="yes"' as a String() property initialisation arg, eg: # file = FileClass(db, "file", name=String(), type=String(), # comment=String(indexme="yes")) # + the comment will then be indexed and be searchable, with the results # related back to the issue that the file is linked to # - as a result of this work, the FileClass has a default MIME type that may # be overridden in a subclass, or by the use of a "type" property as is # done in the default templates. # - the regeneration of the indexes (if necessary) is done once the schema is # set up in the dbinit. # # Revision 1.17 2002/05/24 04:03:23 richard # Added commentage to the dbinit files to help people with their # customisation. # # Revision 1.16 2002/02/16 08:06:14 richard # Removed the key property restriction on title of the classic issue class. # # Revision 1.15 2002/02/15 07:08:44 richard # . Alternate email addresses are now available for users. See the MIGRATION # file for info on how to activate the feature. # # Revision 1.14 2002/01/14 02:20:15 richard # . changed all config accesses so they access either the instance or the # config attriubute on the db. This means that all config is obtained from # instance_config instead of the mish-mash of classes. This will make # switching to a ConfigParser setup easier too, I hope. # # At a minimum, this makes migration a _little_ easier (a lot easier in the # 0.5.0 switch, I hope!) # # Revision 1.13 2002/01/02 02:31:38 richard # Sorry for the huge checkin message - I was only intending to implement #496356 # but I found a number of places where things had been broken by transactions: # . modified ROUNDUPDBSENDMAILDEBUG to be SENDMAILDEBUG and hold a filename # for _all_ roundup-generated smtp messages to be sent to. # . the transaction cache had broken the roundupdb.Class set() reactors # . newly-created author users in the mailgw weren't being committed to the db # # Stuff that made it into CHANGES.txt (ie. the stuff I was actually working # on when I found that stuff :): # . #496356 ] Use threading in messages # . detectors were being registered multiple times # . added tests for mailgw # . much better attaching of erroneous messages in the mail gateway # # Revision 1.12 2001/12/02 05:06:16 richard # . We now use weakrefs in the Classes to keep the database reference, so # the close() method on the database is no longer needed. # I bumped the minimum python requirement up to 2.1 accordingly. # . #487480 ] roundup-server # . #487476 ] INSTALL.txt # # I also cleaned up the change message / post-edit stuff in the cgi client. # There's now a clearly marked "TODO: append the change note" where I believe # the change note should be added there. The "changes" list will obviously # have to be modified to be a dict of the changes, or somesuch. # # More testing needed. # # Revision 1.11 2001/12/01 07:17:50 richard # . We now have basic transaction support! Information is only written to # the database when the commit() method is called. Only the anydbm # backend is modified in this way - neither of the bsddb backends have been. # The mail, admin and cgi interfaces all use commit (except the admin tool # doesn't have a commit command, so interactive users can't commit...) # . Fixed login/registration forwarding the user to the right page (or not, # on a failure) # # Revision 1.10 2001/11/26 22:55:56 richard # Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # # Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # # Revision 1.9 2001/10/30 00:54:45 richard # Features: # . #467129 ] Lossage when username=e-mail-address # . #473123 ] Change message generation for author # . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue. # # Revision 1.8 2001/10/09 07:25:59 richard # Added the Password property type. See "pydoc roundup.password" for # implementation details. Have updated some of the documentation too. # # Revision 1.7 2001/08/07 00:24:43 richard # stupid typo # # Revision 1.6 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.5 2001/08/02 06:38:17 richard # Roundupdb now appends "mailing list" information to its messages which # include the e-mail address and web interface address. Templates may # override this in their db classes to include specific information (support # instructions, etc). # # Revision 1.4 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.3 2001/07/24 10:46:22 anthonybaxter # Added templatebuilder module. two functions - one to pack up the html base, # one to unpack it. Packed up the two standard templates into htmlbases. # Modified __init__ to install them. # # __init__.py magic was needed for the rather high levels of wierd import magic. # Reducing level of import magic == (good, future) # # Revision 1.2 2001/07/24 01:06:43 richard # Oops - accidentally duped the keywords class # # Revision 1.1 2001/07/23 23:28:43 richard # Adding the classic template # # Revision 1.4 2001/07/23 08:45:28 richard # ok, so now "./roundup-admin init" will ask questions in an attempt to get a # workable instance_home set up :) # _and_ anydbm has had its first test :) # # Revision 1.3 2001/07/23 07:14:41 richard # Moved the database backends off into backends. # # Revision 1.2 2001/07/23 06:25:50 richard # relfected the move to roundup/backends # # Revision 1.1 2001/07/23 04:33:21 anthonybaxter # split __init__.py into 2. dbinit and instance_config. # # Revision 1.1 2001/07/23 03:50:46 anthonybaxter # moved templates to proper location # # Revision 1.2 2001/07/22 12:09:32 richard # Final commit of Grande Splite # # # vim: set filetype=python ts=4 sw=4 et si code-c3e391d9c4e9/roundup/templates/classic/detectors/.cvsignore0000644000000000000000000000002407535063756023070 0ustar 00000000000000*.pyc *.pyo *.cover code-c3e391d9c4e9/roundup/templates/classic/detectors/__init__.py0000644000000000000000000000345507535063756023214 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: __init__.py,v 1.3 2001-08-07 00:24:43 richard Exp $ def init(db): ''' execute the init functions of all the modules in this directory ''' import os, sys this_dir = os.path.split(__file__)[0] try: sys.path.insert(0, this_dir) for file in os.listdir(this_dir): file, ext = os.path.splitext(file) if file == '__init__': continue if ext in ('.py', '.pyc'): module = __import__(file) module.init(db) finally: del sys.path[0] # #$Log: not supported by cvs2svn $ #Revision 1.2 2001/08/07 00:15:51 richard #Added the copyright/license notice to (nearly) all files at request of #Bizar Software. # #Revision 1.1 2001/07/23 23:29:10 richard #Adding the classic template # #Revision 1.1 2001/07/23 03:50:47 anthonybaxter #moved templates to proper location # #Revision 1.1 2001/07/22 12:09:32 richard #Final commit of Grande Splite # # code-c3e391d9c4e9/roundup/templates/classic/detectors/nosyreaction.py0000644000000000000000000002053507535063756024170 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: nosyreaction.py,v 1.13 2002-07-31 23:57:36 richard Exp $ from roundup import roundupdb, hyperdb def nosyreaction(db, cl, nodeid, oldvalues): ''' A standard detector is provided that watches for additions to the "messages" property. When a new message is added, the detector sends it to all the users on the "nosy" list for the issue that are not already on the "recipients" list of the message. Those users are then appended to the "recipients" property on the message, so multiple copies of a message are never sent to the same user. The journal recorded by the hyperdatabase on the "recipients" property then provides a log of when the message was sent to whom. ''' # send a copy of all new messages to the nosy list for msgid in determineNewMessages(cl, nodeid, oldvalues): try: cl.nosymessage(nodeid, msgid, oldvalues) except roundupdb.MessageSendError, message: raise roundupdb.DetectorError, message def determineNewMessages(cl, nodeid, oldvalues): ''' Figure a list of the messages that are being added to the given node in this transaction. ''' messages = [] if oldvalues is None: # the action was a create, so use all the messages in the create messages = cl.get(nodeid, 'messages') elif oldvalues.has_key('messages'): # the action was a set (so adding new messages to an existing issue) m = {} for msgid in oldvalues['messages']: m[msgid] = 1 messages = [] # figure which of the messages now on the issue weren't there before for msgid in cl.get(nodeid, 'messages'): if not m.has_key(msgid): messages.append(msgid) return messages def updatenosy(db, cl, nodeid, newvalues): '''Update the nosy list for changes to the assignedto ''' # nodeid will be None if this is a new node current = {} if nodeid is None: ok = ('new', 'yes') else: ok = ('yes',) # old node, get the current values from the node if they haven't # changed if not newvalues.has_key('nosy'): nosy = cl.get(nodeid, 'nosy') for value in nosy: if not current.has_key(value): current[value] = 1 # if the nosy list changed in this transaction, init from the new value if newvalues.has_key('nosy'): nosy = newvalues.get('nosy', []) for value in nosy: if not db.hasnode('user', value): continue if not current.has_key(value): current[value] = 1 # add assignedto(s) to the nosy list if newvalues.has_key('assignedto') and newvalues['assignedto'] is not None: propdef = cl.getprops() if isinstance(propdef['assignedto'], hyperdb.Link): assignedto_ids = [newvalues['assignedto']] elif isinstance(propdef['assignedto'], hyperdb.Multilink): assignedto_ids = newvalues['assignedto'] for assignedto_id in assignedto_ids: if not current.has_key(assignedto_id): current[assignedto_id] = 1 # see if there's any new messages - if so, possibly add the author and # recipient to the nosy if newvalues.has_key('messages'): if nodeid is None: ok = ('new', 'yes') messages = newvalues['messages'] else: ok = ('yes',) # figure which of the messages now on the issue weren't # there before - make sure we don't get a cached version! oldmessages = cl.get(nodeid, 'messages', cache=0) messages = [] for msgid in newvalues['messages']: if msgid not in oldmessages: messages.append(msgid) # configs for nosy modifications add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new') add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new') # now for each new message: msg = db.msg for msgid in messages: if add_author in ok: authid = msg.get(msgid, 'author') current[authid] = 1 # add on the recipients of the message if add_recips in ok: for recipient in msg.get(msgid, 'recipients'): current[recipient] = 1 # that's it, save off the new nosy list newvalues['nosy'] = current.keys() def init(db): db.issue.react('create', nosyreaction) db.issue.react('set', nosyreaction) db.issue.audit('create', updatenosy) db.issue.audit('set', updatenosy) # #$Log: not supported by cvs2svn $ #Revision 1.12 2002/05/29 01:16:17 richard #Sorry about this huge checkin! It's fixing a lot of related stuff in one go #though. # #. #541941 ] changing multilink properties by mail #. #526730 ] search for messages capability #. #505180 ] split MailGW.handle_Message # - also changed cgi client since it was duplicating the functionality #. build htmlbase if tests are run using CVS checkout (removed note from # installation.txt) #. don't create an empty message on email issue creation if the email is empty # #Revision 1.11 2002/01/14 22:21:38 richard ##503353 ] setting properties in initial email # #Revision 1.10 2002/01/11 23:22:29 richard # . #502437 ] rogue reactor and unittest # in short, the nosy reactor was modifying the nosy list. That code had # been there for a long time, and I suspsect it was there because we # weren't generating the nosy list correctly in other places of the code. # We're now doing that, so the nosy-modifying code can go away from the # nosy reactor. # #Revision 1.9 2001/12/15 19:24:39 rochecompaan # . Modified cgi interface to change properties only once all changes are # collected, files created and messages generated. # . Moved generation of change note to nosyreactors. # . We now check for changes to "assignedto" to ensure it's added to the # nosy list. # #Revision 1.8 2001/12/05 14:26:44 rochecompaan #Removed generation of change note from "sendmessage" in roundupdb.py. #The change note is now generated when the message is created. # #Revision 1.7 2001/11/30 11:29:04 rochecompaan #Property changes are now listed in emails generated by Roundup # #Revision 1.6 2001/11/26 22:55:56 richard #Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # #Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # #Revision 1.5 2001/11/12 22:01:07 richard #Fixed issues with nosy reaction and author copies. # #Revision 1.4 2001/10/30 00:54:45 richard #Features: # . #467129 ] Lossage when username=e-mail-address # . #473123 ] Change message generation for author # . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue. # #Revision 1.3 2001/08/07 00:24:43 richard #stupid typo # #Revision 1.2 2001/08/07 00:15:51 richard #Added the copyright/license notice to (nearly) all files at request of #Bizar Software. # #Revision 1.1 2001/07/23 23:29:10 richard #Adding the classic template # #Revision 1.1 2001/07/23 03:50:47 anthonybaxter #moved templates to proper location # #Revision 1.1 2001/07/22 12:09:32 richard #Final commit of Grande Splite # # code-c3e391d9c4e9/roundup/templates/classic/detectors/statusauditor.py0000644000000000000000000000472207535063756024366 0ustar 00000000000000# Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: statusauditor.py,v 1.1 2002-05-29 01:16:17 richard Exp $ def chatty(db, cl, nodeid, newvalues): ''' If the issue is currently 'unread' or 'resolved', then set it to 'chatting' ''' # don't fire if there's no new message (ie. chat) if not newvalues.has_key('messages'): return if newvalues['messages'] == cl.get(nodeid, 'messages', cache=0): return # determine the id of 'unread', 'resolved' and 'chatting' unread_id = db.status.lookup('unread') resolved_id = db.status.lookup('resolved') chatting_id = db.status.lookup('chatting') # get the current value current_status = cl.get(nodeid, 'status') # see if there's an explicit change in this transaction if newvalues.has_key('status') and newvalues['status'] != current_status: # yep, skip return # ok, there's no explicit change, so do it manually if current_status in (unread_id, resolved_id): newvalues['status'] = chatting_id def presetunread(db, cl, nodeid, newvalues): ''' Make sure the status is set on new issues ''' if newvalues.has_key('status'): return # ok, do it newvalues['status'] = db.status.lookup('unread') def init(db): # fire before changes are made db.issue.audit('set', chatty) db.issue.audit('create', presetunread) # #$Log: not supported by cvs2svn $ # code-c3e391d9c4e9/roundup/templates/classic/html/file.index0000644000000000000000000000102607535063756022013 0ustar 00000000000000 dld link content type creator's name creation date code-c3e391d9c4e9/roundup/templates/classic/html/file.newitem0000644000000000000000000000100607535063756022352 0ustar 00000000000000
File upload details
File:
 
code-c3e391d9c4e9/roundup/templates/classic/html/home0000644000000000000000000000105607535063756020721 0ustar 00000000000000 code-c3e391d9c4e9/roundup/templates/classic/html/home.classlist0000644000000000000000000000071307535063756022720 0ustar 00000000000000
classname
name type
code-c3e391d9c4e9/roundup/templates/classic/html/issue.index0000644000000000000000000000703307535063756022230 0ustar 00000000000000
Priority ID Activity Title Status Created By Assigned To
title
<< previous   next >>  
Sort on: Descending:
Group on: Descending:
code-c3e391d9c4e9/roundup/templates/classic/html/issue.item0000644000000000000000000000604707535063756022063 0ustar 00000000000000
Title title
Priority priority Status status
Superseder
View: 		Nosy List
Assigned To assignedto menu    
Change Note
File
  submit button will go here
activity info
Messages
author date 
content
Files
File nameUploaded
dld link creator's name, creation date
History
history
code-c3e391d9c4e9/roundup/templates/classic/html/issue.search0000644000000000000000000001036207535063756022365 0ustar 00000000000000
  Filter onDisplaySort onGroup on
All text*:      
Title:  
Created:
Creator:
Activity:  
Priority:
Status:
Assigned To:
Pagesize:
Start With:
Sort Descending:
Group Descending:
Query name**:
 
  *: The "all text" field will look in message bodies and issue titles
**: If you supply a name, the query will be saved off and available as a link in the sidebar
code-c3e391d9c4e9/roundup/templates/classic/html/msg.index0000644000000000000000000000045507535063756021667 0ustar 00000000000000
code-c3e391d9c4e9/roundup/templates/classic/html/msg.item0000644000000000000000000000233507535063756021515 0ustar 00000000000000
Author
Recipients
Date 

 		




Files



 
  dld link
 
 
  creator's name,
  creation date
 





History


history




code-c3e391d9c4e9/roundup/templates/classic/html/page0000644000000000000000000000630607535063756020710 0ustar  00000000000000

title goes here













  
 
  
name

 		





 
  

   Your Queries

   link
  


  

   Issues

   New Issue

   Unassigned Issues

   All Issues

   Search Issues
  


  

   Admin

   Class List

   User List

   Add User
  


  

   

    

    

    
    
   
   Register
  

   
  

   Hello,
username

   My Issues

   My Details

   Logout
  

 

 
  
error

  
error

 		




 
   The page content goes here.
 











code-c3e391d9c4e9/roundup/templates/classic/html/query.index0000755000000000000000000000031307535063756022242 0ustar  00000000000000
  
    
      
    
  
  
    
      
    
  


code-c3e391d9c4e9/roundup/templates/classic/html/query.item0000755000000000000000000000114207535063756022072 0ustar  00000000000000



  Query





  Class
  





  Name
  





  





  
  





code-c3e391d9c4e9/roundup/templates/classic/html/style.css0000644000000000000000000000711107535063756021716 0ustar  00000000000000/* main page styles */
.body {
  font-family: sans-serif, Arial, Helvetica;
  color: #333333;
}
a:hover { text-decoration: underline; }
a:link { text-decoration: none; }
a { text-decoration: none; }

.page-header-left {
  background-color: #cccc88;
  padding: 5px;
}

.page-header-top {
  background-color: #cccc88;
  border-bottom: 1px solid #dddd99;
  padding: 5px;
}

td.sidebar {
  background-color: #cccc88;
  border-right: 1px solid #dddd99;
  border-bottom: 1px solid #dddd99;
  padding: 0px;
}

td.sidebar p.classblock {
  padding: 0 5 0 5;
  border-top: 1px solid #dddd99;
  border-bottom: 1px solid #dddd99;
}

td.sidebar p.userblock {
  padding: 0 5 0 5;
  background-color: #dddd99;
  border-top: 1px solid #ffffbb;
  border-bottom: 1px solid #ffffbb;
}

td.content {
  padding: 1px;
}

p.ok-message {
  background-color: #22bb22;
  padding: 5 5 5 5;
  color: white;
  font-weight: bold;
}
p.error-message {
  background-color: #bb2222;
  padding: 5 5 5 5;
  color: white;
  font-weight: bold;
}


/* style for forms */
table.form {
  border-spacing: 0px;
  border-collapse: separate;
}

.form th {
  font-weight: bold;
  color: #333388;
  text-align: right;
  vertical-align: top;
}

.form-header th {
  font-weight: bold;
  color: #333388;
  background-color: #eeeeff;
  text-align: left;
}

.form td.optional {
  font-weight: bold;
  font-style: italic;
  color: #333333;
}

.form td {
  color: #333333;
}

.form td.html {
  color: #777777;
}

/* style for lists */
table.list {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.list th {
  padding: 0 4 0 4;
  color: #404070;
  background-color: #eeeeff;
  border-right: 1px solid #404070;
  border-top: 1px solid #404070;
  vertical-align: top;
}
table.list th a:hover { color: #404070 }
table.list th a:link { color: #404070 }
table.list th a { color: #404070 }
table.list th.group {
  background-color: #f4f4ff;
  text-align: center;
}

table.list td {
  padding: 0 4 0 4;
  border: 0 2 0 2;
  border-right: 1px solid #404070;
  color: #404070;
  background-color: white;
  vertical-align: top;
}

table.list td.normal {
}

table.list td.alt {
  background-color: #efefef;
}

table.list td:first-child {
  border-left: 1px solid #404070;
  border-right: 1px solid #404070;
}

table.list th:first-child {
  border-left: 1px solid #404070;
  border-right: 1px solid #404070;
}


/* style for message displays */
table.messages {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.messages th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.messages th {
  font-weight: bold;
  color: black;
  text-align: left;
}

table.messages td {
  font-family: monospace;
  background-color: #efefef;
  border-top: 1px solid #afafaf;
  border-bottom: 1px solid #afafaf;
  color: black;
}

/* style for file displays */
table.files {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.files th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.files th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}

table.files td {
  font-family: monospace;
}


/* style for file displays */
table.otherinfo {
  border-spacing: 0px;
  border-collapse: separate;
  width: 100%;
}

table.otherinfo th.header{
  padding-top: 10px;
  border-bottom: 1px solid gray;
  font-weight: bold;
  background-color: white;
  color: #707040;
}

table.otherinfo th {
  border-bottom: 1px solid #afafaf;
  font-weight: bold;
  text-align: left;
}

code-c3e391d9c4e9/roundup/templates/classic/html/user.index0000644000000000000000000000140007535063756022046 0ustar  00000000000000




 Username
 Real name
 Organisation
 Email address
 Phone number




 
  username
 
 realname
 organisation
 address
 phone




code-c3e391d9c4e9/roundup/templates/classic/html/user.item0000644000000000000000000000505107535063756021703 0ustar  00000000000000



You are not allowed to view this page.








 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Roles
  roles
  
   
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

   
  submit button here
 







 

  
Queries

  

   query
  

 


 

  
History

  

   history
  

 







 

  realname
 

 

  Login Name
  username
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  E-mail address
  address
 






code-c3e391d9c4e9/roundup/templates/classic/html/user.register0000644000000000000000000000326007535063756022571 0ustar  00000000000000



You are not allowed to view this page.








 

  Name
  realname
 

 

  Login Name
  username
 

 

  Login Password
  password
 

 

  Roles
  roles
  
   
  
 

 

  Phone
  phone
 

 

  Organisation
  organisation
 

 

  E-mail address
  address
 

 

  Alternate E-mail addresses
One address per line		
  alternate_addresses
 


 

   
  
   
   
  
 










code-c3e391d9c4e9/roundup/templates/classic/instance_config.py0000644000000000000000000002060007535063756022601 0ustar  00000000000000#
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE.  THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
# 
# $Id: instance_config.py,v 1.21 2002-09-02 07:46:55 richard Exp $

MAIL_DOMAIN=MAILHOST=HTTP_HOST=None
HTTP_PORT=0

try:
    from localconfig import *
except ImportError:
    localconfig = None

import os

# roundup home is this package's directory
INSTANCE_HOME=os.path.split(__file__)[0]

# The SMTP mail host that roundup will use to send mail
if not MAILHOST:
    MAILHOST = 'localhost'

# The domain name used for email addresses.
if not MAIL_DOMAIN:
    MAIL_DOMAIN = 'your.tracker.email.domain.example'

# This is the directory that the database is going to be stored in
DATABASE = os.path.join(INSTANCE_HOME, 'db')

# This is the directory that the HTML templates reside in
TEMPLATES = os.path.join(INSTANCE_HOME, 'html')

# A descriptive name for your roundup instance
INSTANCE_NAME = 'Roundup issue tracker'

# The email address that mail to roundup should go to
ISSUE_TRACKER_EMAIL = 'issue_tracker@%s'%MAIL_DOMAIN

# The web address that the instance is viewable at
ISSUE_TRACKER_WEB = 'http://your.tracker.url.example/'

# The email address that roundup will complain to if it runs into trouble
ADMIN_EMAIL = 'roundup-admin@%s'%MAIL_DOMAIN

# Where to place the web filtering HTML on the index page
FILTER_POSITION = 'bottom'          # one of 'top', 'bottom', 'top and bottom'

# 
# SECURITY DEFINITIONS
#
# define the Roles that a user gets when they register with the tracker
# these are a comma-separated string of role names (e.g. 'Admin,User')
NEW_WEB_USER_ROLES = 'User'
NEW_EMAIL_USER_ROLES = 'User'

# Send nosy messages to the author of the message
MESSAGES_TO_AUTHOR = 'no'           # either 'yes' or 'no'

# Does the author of a message get placed on the nosy list automatically?
# If 'new' is used, then the author will only be added when a message
# creates a new issue. If 'yes', then the author will be added on followups
# too. If 'no', they're never added to the nosy.
ADD_AUTHOR_TO_NOSY = 'new'          # one of 'yes', 'no', 'new'

# Do the recipients (To:, Cc:) of a message get placed on the nosy list?
# If 'new' is used, then the recipients will only be added when a message
# creates a new issue. If 'yes', then the recipients will be added on followups
# too. If 'no', they're never added to the nosy.
ADD_RECIPIENTS_TO_NOSY = 'new'      # either 'yes', 'no', 'new'

# Where to place the email signature
EMAIL_SIGNATURE_POSITION = 'bottom' # one of 'top', 'bottom', 'none'

# Keep email citations
EMAIL_KEEP_QUOTED_TEXT = 'no'       # either 'yes' or 'no'

# Preserve the email body as is
EMAIL_LEAVE_BODY_UNCHANGED = 'no'   # either 'yes' or 'no'

# Default class to use in the mailgw if one isn't supplied in email
# subjects. To disable, comment out the variable below or leave it blank.
# Examples:
MAIL_DEFAULT_CLASS = 'issue'   # use "issue" class by default
#MAIL_DEFAULT_CLASS = ''        # disable (or just comment the var out)

#
# $Log: not supported by cvs2svn $
# Revision 1.20  2002/08/16 04:28:41  richard
# removed old, unused config vars
#
# Revision 1.19  2002/07/26 08:26:59  richard
# Very close now. The cgi and mailgw now use the new security API. The two
# templates have been migrated to that setup. Lots of unit tests. Still some
# issue in the web form for editing Roles assigned to users.
#
# Revision 1.18  2002/05/25 07:16:25  rochecompaan
# Merged search_indexing-branch with HEAD
#
# Revision 1.17  2002/05/22 00:32:33  richard
#  . changed the default message list in issues to display the message body
#  . made backends.__init__ be more specific about which ImportErrors it really
#    wants to ignore
#  . fixed the example addresses in the templates to use correct example domains
#  . cleaned out the template stylesheets, removing a bunch of junk that really
#    wasn't necessary (font specs, styles never used) and added a style for
#    message content
#
# Revision 1.16  2002/05/21 06:05:54  richard
#  . #551483 ] assignedto in Client.make_index_link
#
# Revision 1.15  2002/05/02 07:56:34  richard
# . added option to automatically add the authors and recipients of messages
#   to the nosy lists with the options ADD_AUTHOR_TO_NOSY (default 'new') and
#   ADD_RECIPIENTS_TO_NOSY (default 'new'). These settings emulate the current
#   behaviour. Setting them to 'yes' will add the author/recipients to the nosy
#   on messages that create issues and followup messages.
# . added missing documentation for a few of the config option values
#
# Revision 1.14  2002/04/23 15:46:49  rochecompaan
#  . stripping of the email message body can now be controlled through
#    the config variables EMAIL_KEEP_QUOTED_TEST and
#    EMAIL_LEAVE_BODY_UNCHANGED.
#
# Revision 1.13.2.2  2002/05/02 11:49:19  rochecompaan
# Allow customization of the search filters that should be displayed
# on the search page.
#
# Revision 1.13.2.1  2002/04/20 13:23:33  rochecompaan
# We now have a separate search page for nodes.  Search links for
# different classes can be customized in instance_config similar to
# index links.
#
# Revision 1.13  2002/03/14 23:59:24  richard
#  . #517734 ] web header customisation is obscure
#
# Revision 1.12  2002/02/15 00:13:38  richard
#  . #503204 ] mailgw needs a default class
#     - partially done - the setting of additional properties can wait for a
#       better configuration system.
#
# Revision 1.11  2002/02/14 23:46:02  richard
# . #516883 ] mail interface + ANONYMOUS_REGISTER
#
# Revision 1.10  2001/11/26 22:55:56  richard
# Feature:
#  . Added INSTANCE_NAME to configuration - used in web and email to identify
#    the instance.
#  . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup
#    signature info in e-mails.
#  . Some more flexibility in the mail gateway and more error handling.
#  . Login now takes you to the page you back to the were denied access to.
#
# Fixed:
#  . Lots of bugs, thanks Roché and others on the devel mailing list!
#
# Revision 1.9  2001/10/30 00:54:45  richard
# Features:
#  . #467129 ] Lossage when username=e-mail-address
#  . #473123 ] Change message generation for author
#  . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue.
#
# Revision 1.8  2001/10/23 01:00:18  richard
# Re-enabled login and registration access after lopping them off via
# disabling access for anonymous users.
# Major re-org of the htmltemplate code, cleaning it up significantly. Fixed
# a couple of bugs while I was there. Probably introduced a couple, but
# things seem to work OK at the moment.
#
# Revision 1.7  2001/10/22 03:25:01  richard
# Added configuration for:
#  . anonymous user access and registration (deny/allow)
#  . filter "widget" location on index page (top, bottom, both)
# Updated some documentation.
#
# Revision 1.6  2001/10/01 06:10:42  richard
# stop people setting up roundup with our addresses as default - need to
# handle this better in the init
#
# Revision 1.5  2001/08/07 00:24:43  richard
# stupid typo
#
# Revision 1.4  2001/08/07 00:15:51  richard
# Added the copyright/license notice to (nearly) all files at request of
# Bizar Software.
#
# Revision 1.3  2001/08/02 06:38:17  richard
# Roundupdb now appends "mailing list" information to its messages which
# include the e-mail address and web interface address. Templates may
# override this in their db classes to include specific information (support
# instructions, etc).
#
# Revision 1.2  2001/07/29 07:01:39  richard
# Added vim command to all source so that we don't get no steenkin' tabs :)
#
# Revision 1.1  2001/07/23 23:28:43  richard
# Adding the classic template
#
# Revision 1.1  2001/07/23 04:33:21  anthonybaxter
# split __init__.py into 2. dbinit and instance_config.
#
#
# vim: set filetype=python ts=4 sw=4 et si
code-c3e391d9c4e9/roundup/templates/classic/interfaces.py0000644000000000000000000000725607535063756021607 0ustar  00000000000000#
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE.  THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
# 
# $Id: interfaces.py,v 1.14 2002-08-30 08:31:01 richard Exp $

import instance_config
from roundup import mailgw 
from roundup.cgi import client

class Client(client.Client): 
    ''' derives basic CGI implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

class MailGW(mailgw.MailGW): 
    ''' derives basic mail gateway implementation from the standard module, 
        with any specific extensions 
    ''' 
    pass

#
# $Log: not supported by cvs2svn $
# Revision 1.13  2002/08/16 04:26:00  richard
# preparation for moving cgi modules around
#
# Revision 1.12  2002/01/14 02:20:15  richard
#  . changed all config accesses so they access either the instance or the
#    config attriubute on the db. This means that all config is obtained from
#    instance_config instead of the mish-mash of classes. This will make
#    switching to a ConfigParser setup easier too, I hope.
#
# At a minimum, this makes migration a _little_ easier (a lot easier in the
# 0.5.0 switch, I hope!)
#
# Revision 1.11  2002/01/02 02:32:38  richard
# ANONYMOUS_ACCESS -> ANONYMOUS_REGISTER
#
# Revision 1.10  2001/12/20 15:43:01  rochecompaan
# Features added:
#  .  Multilink properties are now displayed as comma separated values in
#     a textbox
#  .  The add user link is now only visible to the admin user
#  .  Modified the mail gateway to reject submissions from unknown
#     addresses if ANONYMOUS_ACCESS is denied
#
# Revision 1.9  2001/11/26 23:00:53  richard
# This config stuff is getting to be a real mess...
#
# Revision 1.8  2001/10/22 03:25:01  richard
# Added configuration for:
#  . anonymous user access and registration (deny/allow)
#  . filter "widget" location on index page (top, bottom, both)
# Updated some documentation.
#
# Revision 1.7  2001/10/09 07:38:58  richard
# Pushed the base code for the extended schema CGI interface back into the
# code cgi_client module so that future updates will be less painful.
# Also removed a debugging print statement from cgi_client.
#
# Revision 1.6  2001/08/07 00:24:43  richard
# stupid typo
#
# Revision 1.5  2001/08/07 00:15:51  richard
# Added the copyright/license notice to (nearly) all files at request of
# Bizar Software.
#
# Revision 1.4  2001/07/30 01:25:57  richard
# Changes to reflect cgi_client now implementing this template by default,
# and not "extended".
#
# Revision 1.3  2001/07/29 07:01:39  richard
# Added vim command to all source so that we don't get no steenkin' tabs :)
#
# Revision 1.2  2001/07/29 04:07:37  richard
# Fixed the classic template so it's more like the "advertised" Roundup
# template.
#
# Revision 1.1  2001/07/23 23:28:43  richard
# Adding the classic template
#
# Revision 1.1  2001/07/23 23:16:01  richard
# Split off the interfaces (CGI, mailgw) into a separate file from the DB stuff.
#
#
# vim: set filetype=python ts=4 sw=4 et si