code-ba38e1e718f2/roundup/templates/extended/.cvsignore0000644000000000000000000000004007514213004021214 0ustar 00000000000000*.pyc *.pyo htmlbase.py *.cover code-ba38e1e718f2/roundup/templates/extended/__init__.py0000644000000000000000000000377507514213004021347 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.7 2001-08-07 00:24:43 richard Exp $ from instance_config import * try: from dbinit import * except ImportError: pass # in installdir (probably :) from interfaces import * # # $Log: not supported by cvs2svn $ # Revision 1.6 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.5 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.4 2001/07/24 10:46:22 anthonybaxter # Added templatebuilder module. two functions - one to pack up the html base, # one to unpack it. Packed up the two standard templates into htmlbases. # Modified __init__ to install them. # # __init__.py magic was needed for the rather high levels of wierd import magic. # Reducing level of import magic == (good, future) # # Revision 1.3 2001/07/23 23:16:01 richard # Split off the interfaces (CGI, mailgw) into a separate file from the DB stuff. # # Revision 1.2 2001/07/23 04:33:21 anthonybaxter # split __init__.py into 2. dbinit and instance_config. # # # vim: set filetype=python ts=4 sw=4 et si code-ba38e1e718f2/roundup/templates/extended/dbinit.py0000644000000000000000000003102707514213004021050 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: dbinit.py,v 1.23 2002-07-14 02:05:54 richard Exp $ import os import instance_config from select_db import Database, Class, FileClass, IssueClass def open(name=None): ''' as from the roundupdb method openDB ''' from roundup.hyperdb import String, Password, Date, Link, Multilink # open the database db = Database(instance_config, name) # # Now initialise the schema. Must do this each time the database is # opened. # # Class automatically gets these properties: # creation = Date() # activity = Date() # creator = Link('user') pri = Class(db, "priority", name=String(), order=String()) pri.setkey("name") stat = Class(db, "status", name=String(), order=String()) stat.setkey("name") keywords = Class(db, "keyword", name=String()) keywords.setkey("name") user = Class(db, "user", username=String(), password=Password(), address=String(), realname=String(), phone=String(), organisation=String(), alternate_addresses=String()) user.setkey("username") # FileClass automatically gets these properties: # content = String() [saved to disk in /db/files/] # (it also gets the Class properties creation, activity and creator) msg = FileClass(db, "msg", author=Link("user"), recipients=Multilink("user"), date=Date(), summary=String(), files=Multilink("file"), messageid=String(), inreplyto=String()) file = FileClass(db, "file", name=String(), type=String()) # bugs and support calls etc rate = Class(db, "rate", name=String(), order=String()) rate.setkey("name") source = Class(db, "source", name=String(), order=String()) source.setkey("name") platform = Class(db, "platform", name=String(), order=String()) platform.setkey("name") product = Class(db, "product", name=String(), order=String()) product.setkey("name") timelog = Class(db, "timelog", date=Date(), time=String(), performedby=Link("user"), description=String()) # IssueClass automatically gets these properties: # title = String() # messages = Multilink("msg") # files = Multilink("file") # nosy = Multilink("user") # superseder = Multilink("issue") # (it also gets the Class properties creation, activity and creator) support = IssueClass(db, "support", assignedto=Link("user"), status=Link("status"), rate=Link("rate"), source=Link("source"), product=Link("product"), platform=Multilink("platform"), version=String(), timelog=Multilink("timelog"), customername=String()) issue = IssueClass(db, "issue", assignedto=Link("user"), priority=Link("priority"), status=Link("status"), product=Link("product"), platform=Multilink("platform"), version=String(), targetversion=String(), supportcall=Multilink("support")) import detectors detectors.init(db) # schema is set up - run any post-initialisation db.post_init() return db def init(adminpw): ''' as from the roundupdb method initDB Open the new database, and add new nodes - used for initialisation. You can edit this before running the "roundup-admin initialise" command to change the initial database entries. ''' dbdir = os.path.join(instance_config.DATABASE, 'files') if not os.path.isdir(dbdir): os.makedirs(dbdir) db = open("admin") db.clear() pri = db.getclass('priority') pri.create(name="fatal-bug", order="1") pri.create(name="bug", order="2") pri.create(name="usability", order="3") pri.create(name="feature", order="4") stat = db.getclass('status') stat.create(name="unread", order="1") stat.create(name="deferred", order="2") stat.create(name="chatting", order="3") stat.create(name="need-eg", order="4") stat.create(name="in-progress", order="5") stat.create(name="testing", order="6") stat.create(name="done-cbb", order="7") stat.create(name="resolved", order="8") rate = db.getclass("rate") rate.create(name='basic', order="1") rate.create(name='premium', order="2") rate.create(name='internal', order="3") source = db.getclass("source") source.create(name='phone', order="1") source.create(name='e-mail', order="2") source.create(name='internal', order="3") source.create(name='internal-qa', order="4") platform = db.getclass("platform") platform.create(name='linux', order="1") platform.create(name='windows', order="2") platform.create(name='mac', order="3") product = db.getclass("product") product.create(name='Bizar Shop', order="1") product.create(name='Bizar Shop Developer', order="2") product.create(name='Bizar Shop Manual', order="3") product.create(name='Bizar Shop Developer Manual', order="4") user = db.getclass('user') user.create(username="admin", password=adminpw, address=instance_config.ADMIN_EMAIL) db.commit() # # $Log: not supported by cvs2svn $ # Revision 1.22 2002/07/09 03:02:53 richard # More indexer work: # - all String properties may now be indexed too. Currently there's a bit of # "issue" specific code in the actual searching which needs to be # addressed. In a nutshell: # + pass 'indexme="yes"' as a String() property initialisation arg, eg: # file = FileClass(db, "file", name=String(), type=String(), # comment=String(indexme="yes")) # + the comment will then be indexed and be searchable, with the results # related back to the issue that the file is linked to # - as a result of this work, the FileClass has a default MIME type that may # be overridden in a subclass, or by the use of a "type" property as is # done in the default templates. # - the regeneration of the indexes (if necessary) is done once the schema is # set up in the dbinit. # # Revision 1.21 2002/05/24 04:03:23 richard # Added commentage to the dbinit files to help people with their # customisation. # # Revision 1.20 2002/02/15 07:08:44 richard # . Alternate email addresses are now available for users. See the MIGRATION # file for info on how to activate the feature. # # Revision 1.19 2002/01/14 02:20:15 richard # . changed all config accesses so they access either the instance or the # config attriubute on the db. This means that all config is obtained from # instance_config instead of the mish-mash of classes. This will make # switching to a ConfigParser setup easier too, I hope. # # At a minimum, this makes migration a _little_ easier (a lot easier in the # 0.5.0 switch, I hope!) # # Revision 1.18 2002/01/02 02:31:38 richard # Sorry for the huge checkin message - I was only intending to implement #496356 # but I found a number of places where things had been broken by transactions: # . modified ROUNDUPDBSENDMAILDEBUG to be SENDMAILDEBUG and hold a filename # for _all_ roundup-generated smtp messages to be sent to. # . the transaction cache had broken the roundupdb.Class set() reactors # . newly-created author users in the mailgw weren't being committed to the db # # Stuff that made it into CHANGES.txt (ie. the stuff I was actually working # on when I found that stuff :): # . #496356 ] Use threading in messages # . detectors were being registered multiple times # . added tests for mailgw # . much better attaching of erroneous messages in the mail gateway # # Revision 1.17 2001/12/02 05:06:16 richard # . We now use weakrefs in the Classes to keep the database reference, so # the close() method on the database is no longer needed. # I bumped the minimum python requirement up to 2.1 accordingly. # . #487480 ] roundup-server # . #487476 ] INSTALL.txt # # I also cleaned up the change message / post-edit stuff in the cgi client. # There's now a clearly marked "TODO: append the change note" where I believe # the change note should be added there. The "changes" list will obviously # have to be modified to be a dict of the changes, or somesuch. # # More testing needed. # # Revision 1.16 2001/12/01 07:17:50 richard # . We now have basic transaction support! Information is only written to # the database when the commit() method is called. Only the anydbm # backend is modified in this way - neither of the bsddb backends have been. # The mail, admin and cgi interfaces all use commit (except the admin tool # doesn't have a commit command, so interactive users can't commit...) # . Fixed login/registration forwarding the user to the right page (or not, # on a failure) # # Revision 1.15 2001/11/26 22:55:56 richard # Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # # Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # # Revision 1.14 2001/11/21 02:34:18 richard # Added a target version field to the extended issue schema # # Revision 1.13 2001/10/30 00:54:45 richard # Features: # . #467129 ] Lossage when username=e-mail-address # . #473123 ] Change message generation for author # . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue. # # Revision 1.12 2001/10/09 07:25:59 richard # Added the Password property type. See "pydoc roundup.password" for # implementation details. Have updated some of the documentation too. # # Revision 1.11 2001/08/07 00:24:43 richard # stupid typo # # Revision 1.10 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.9 2001/08/02 06:38:17 richard # Roundupdb now appends "mailing list" information to its messages which # include the e-mail address and web interface address. Templates may # override this in their db classes to include specific information (support # instructions, etc). # # Revision 1.8 2001/07/30 01:26:59 richard # Big changes: # . split off the support priority into its own class # . added "new support, new user" to the page head # . fixed the display options for the heading links # # Revision 1.7 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.6 2001/07/25 01:23:07 richard # Added the Roundup spec to the new documentation directory. # # Revision 1.5 2001/07/23 23:20:35 richard # forgot to remove the interfaces from the dbinit module ;) # # Revision 1.4 2001/07/23 08:45:28 richard # ok, so now "./roundup-admin init" will ask questions in an attempt to get a # workable instance_home set up :) # _and_ anydbm has had its first test :) # # Revision 1.3 2001/07/23 07:14:41 richard # Moved the database backends off into backends. # # Revision 1.2 2001/07/23 06:25:50 richard # relfected the move to roundup/backends # # Revision 1.1 2001/07/23 04:33:21 anthonybaxter # split __init__.py into 2. dbinit and instance_config. # # Revision 1.1 2001/07/23 03:50:46 anthonybaxter # moved templates to proper location # # Revision 1.2 2001/07/22 12:09:32 richard # Final commit of Grande Splite # # # vim: set filetype=python ts=4 sw=4 et si code-ba38e1e718f2/roundup/templates/extended/detectors/.cvsignore0000644000000000000000000000002407514213004023212 0ustar 00000000000000*.pyc *.pyo *.cover code-ba38e1e718f2/roundup/templates/extended/detectors/__init__.py0000644000000000000000000000355007514213004023332 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: __init__.py,v 1.4 2002-05-29 01:16:17 richard Exp $ def init(db): ''' execute the init functions of all the modules in this directory ''' import os, sys this_dir = os.path.split(__file__)[0] try: sys.path.insert(0, this_dir) for file in os.listdir(this_dir): file, ext = os.path.splitext(file) if file == '__init__': continue if ext in ('.py', '.pyc'): module = __import__(file) module.init(db) finally: del sys.path[0] # #$Log: not supported by cvs2svn $ #Revision 1.3 2001/08/07 00:24:43 richard #stupid typo # #Revision 1.2 2001/08/07 00:15:51 richard #Added the copyright/license notice to (nearly) all files at request of #Bizar Software. # #Revision 1.1 2001/07/23 23:29:10 richard #Adding the classic template # #Revision 1.1 2001/07/23 03:50:47 anthonybaxter #moved templates to proper location # #Revision 1.1 2001/07/22 12:09:32 richard #Final commit of Grande Splite # # code-ba38e1e718f2/roundup/templates/extended/detectors/nosyreaction.py0000644000000000000000000001746107514213004024316 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # #$Id: nosyreaction.py,v 1.12 2002-05-29 01:16:17 richard Exp $ from roundup import roundupdb, hyperdb def nosyreaction(db, cl, nodeid, oldvalues): ''' A standard detector is provided that watches for additions to the "messages" property. When a new message is added, the detector sends it to all the users on the "nosy" list for the issue that are not already on the "recipients" list of the message. Those users are then appended to the "recipients" property on the message, so multiple copies of a message are never sent to the same user. The journal recorded by the hyperdatabase on the "recipients" property then provides a log of when the message was sent to whom. ''' # send a copy of all new messages to the nosy list for msgid in determineNewMessages(cl, nodeid, oldvalues): try: cl.nosymessage(nodeid, msgid, oldvalues) except roundupdb.MessageSendError, message: raise roundupdb.DetectorError, message def determineNewMessages(cl, nodeid, oldvalues): ''' Figure a list of the messages that are being added to the given node in this transaction. ''' messages = [] if oldvalues is None: # the action was a create, so use all the messages in the create messages = cl.get(nodeid, 'messages') elif oldvalues.has_key('messages'): # the action was a set (so adding new messages to an existing issue) m = {} for msgid in oldvalues['messages']: m[msgid] = 1 messages = [] # figure which of the messages now on the issue weren't there before for msgid in cl.get(nodeid, 'messages'): if not m.has_key(msgid): messages.append(msgid) return messages def updatenosy(db, cl, nodeid, newvalues): '''Update the nosy list for changes to the assignedto ''' # nodeid will be None if this is a new node current = {} if nodeid is None: ok = ('new', 'yes') else: ok = ('yes',) # old node, get the current values from the node if they haven't # changed if not newvalues.has_key('nosy'): nosy = cl.get(nodeid, 'nosy') for value in nosy: if not current.has_key(value): current[value] = 1 # if the nosy list changed in this transaction, init from the new value if newvalues.has_key('nosy'): nosy = newvalues.get('nosy', []) for value in nosy: if not db.hasnode('user', value): continue if not current.has_key(value): current[value] = 1 # add assignedto(s) to the nosy list if newvalues.has_key('assignedto'): propdef = cl.getprops() if isinstance(propdef['assignedto'], hyperdb.Link): assignedto_ids = [newvalues['assignedto']] elif isinstance(propdef['assignedto'], hyperdb.Multilink): assignedto_ids = newvalues['assignedto'] for assignedto_id in assignedto_ids: if not current.has_key(assignedto_id): current[assignedto_id] = 1 # see if there's any new messages - if so, possibly add the author and # recipient to the nosy if newvalues.has_key('messages'): if nodeid is None: ok = ('new', 'yes') messages = newvalues['messages'] else: ok = ('yes',) # figure which of the messages now on the issue weren't # there before - make sure we don't get a cached version! oldmessages = cl.get(nodeid, 'messages', cache=0) messages = [] for msgid in newvalues['messages']: if msgid not in oldmessages: messages.append(msgid) # configs for nosy modifications add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new') add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new') # now for each new message: msg = db.msg for msgid in messages: if add_author in ok: authid = msg.get(msgid, 'author') current[authid] = 1 # add on the recipients of the message if add_recips in ok: for recipient in msg.get(msgid, 'recipients'): current[recipient] = 1 # that's it, save off the new nosy list newvalues['nosy'] = current.keys() def init(db): db.issue.react('create', nosyreaction) db.issue.react('set', nosyreaction) db.issue.audit('create', updatenosy) db.issue.audit('set', updatenosy) # #$Log: not supported by cvs2svn $ #Revision 1.11 2002/01/14 22:21:38 richard ##503353 ] setting properties in initial email # #Revision 1.10 2002/01/11 23:22:29 richard # . #502437 ] rogue reactor and unittest # in short, the nosy reactor was modifying the nosy list. That code had # been there for a long time, and I suspsect it was there because we # weren't generating the nosy list correctly in other places of the code. # We're now doing that, so the nosy-modifying code can go away from the # nosy reactor. # #Revision 1.9 2001/12/15 19:24:39 rochecompaan # . Modified cgi interface to change properties only once all changes are # collected, files created and messages generated. # . Moved generation of change note to nosyreactors. # . We now check for changes to "assignedto" to ensure it's added to the # nosy list. # #Revision 1.8 2001/12/05 14:26:44 rochecompaan #Removed generation of change note from "sendmessage" in roundupdb.py. #The change note is now generated when the message is created. # #Revision 1.7 2001/11/30 11:29:04 rochecompaan #Property changes are now listed in emails generated by Roundup # #Revision 1.6 2001/11/26 22:55:56 richard #Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # #Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # #Revision 1.5 2001/11/12 22:01:07 richard #Fixed issues with nosy reaction and author copies. # #Revision 1.4 2001/10/30 00:54:45 richard #Features: # . #467129 ] Lossage when username=e-mail-address # . #473123 ] Change message generation for author # . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue. # #Revision 1.3 2001/08/07 00:24:43 richard #stupid typo # #Revision 1.2 2001/08/07 00:15:51 richard #Added the copyright/license notice to (nearly) all files at request of #Bizar Software. # #Revision 1.1 2001/07/23 23:29:10 richard #Adding the classic template # #Revision 1.1 2001/07/23 03:50:47 anthonybaxter #moved templates to proper location # #Revision 1.1 2001/07/22 12:09:32 richard #Final commit of Grande Splite # # code-ba38e1e718f2/roundup/templates/extended/detectors/statusauditor.py0000644000000000000000000000472207514213004024510 0ustar 00000000000000# Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/) # # Permission is hereby granted, free of charge, to any person obtaining a copy # of this software and associated documentation files (the "Software"), to deal # in the Software without restriction, including without limitation the rights # to use, copy, modify, merge, publish, distribute, sublicense, and/or sell # copies of the Software, and to permit persons to whom the Software is # furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE # AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, # OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # #$Id: statusauditor.py,v 1.1 2002-05-29 01:16:17 richard Exp $ def chatty(db, cl, nodeid, newvalues): ''' If the issue is currently 'unread' or 'resolved', then set it to 'chatting' ''' # don't fire if there's no new message (ie. chat) if not newvalues.has_key('messages'): return if newvalues['messages'] == cl.get(nodeid, 'messages', cache=0): return # determine the id of 'unread', 'resolved' and 'chatting' unread_id = db.status.lookup('unread') resolved_id = db.status.lookup('resolved') chatting_id = db.status.lookup('chatting') # get the current value current_status = cl.get(nodeid, 'status') # see if there's an explicit change in this transaction if newvalues.has_key('status') and newvalues['status'] != current_status: # yep, skip return # ok, there's no explicit change, so do it manually if current_status in (unread_id, resolved_id): newvalues['status'] = chatting_id def presetunread(db, cl, nodeid, newvalues): ''' Make sure the status is set on new issues ''' if newvalues.has_key('status'): return # ok, do it newvalues['status'] = db.status.lookup('unread') def init(db): # fire before changes are made db.issue.audit('set', chatty) db.issue.audit('create', presetunread) # #$Log: not supported by cvs2svn $ # code-ba38e1e718f2/roundup/templates/extended/html/file.index0000644000000000000000000000071007514213004022134 0ustar 00000000000000 code-ba38e1e718f2/roundup/templates/extended/html/file.newitem0000644000000000000000000000074607514213004022506 0ustar 00000000000000
File upload details
File:
 
code-ba38e1e718f2/roundup/templates/extended/html/issue.filter0000644000000000000000000000223207514213004022524 0ustar 00000000000000 Title Status Priority Platform Product Version Assigned to code-ba38e1e718f2/roundup/templates/extended/html/issue.index0000644000000000000000000000206107514213004022346 0ustar 00000000000000 code-ba38e1e718f2/roundup/templates/extended/html/issue.item0000644000000000000000000001002507514213004022174 0ustar 00000000000000
Item Information
Title
Product version: Platform
  Target Version
Created () Last activity
Priority Status
Assigned to Nosy List
Superseder
View: 		Support call
View:
Change Note
File
 
Messages
Files
:files">Attach a file to this issue
History
code-ba38e1e718f2/roundup/templates/extended/html/msg.index0000644000000000000000000000044307514213004022006 0ustar 00000000000000
code-ba38e1e718f2/roundup/templates/extended/html/msg.item0000644000000000000000000000214107514213004021632 0ustar 00000000000000
Message Information
Author
Recipients
Date
Files
History
code-ba38e1e718f2/roundup/templates/extended/html/style.css0000644000000000000000000000261507514213004022044 0ustar 00000000000000a:hover { text-decoration: underline; color: #333333; } a:link { text-decoration: none; color: #000099; } a { text-decoration: none; color: #000099; } p { color: #333333; } th { font-weight: bold; color: #333333; } .form-help { color: #333333; } .location-bar { background-color: #efefef; border: none; } .strong-header { font-weight: bold; background-color: #000000; color: #ffffff; } .list-header { background-color: #aaccff; color: #000000; border: none; } .section-bar { background-color: #707070; color: #ffffff; border: 1px solid #404040; } .row-normal { background-color: #ffffff; border: none; } .row-hilite { background-color: #efefef; border: none; } .msg-header { font-family: Verdana, Helvetica, sans-serif; font-weight: bold; background-color: #EE71AC; color: #ffffff; } .msg-content { font-family: monospace; background-color: #ffeaff; color: #000000; } .system-msg { background-color: #ffffff; border: 1px solid #000000; margin-bottom: 6px; margin-top: 6px; padding: 4px; width: 100%; color: #660033; } .form-title { font-weight: bold; color: #333333; } .form-label { font-weight: bold; color: #333333; } .form-optional { font-weight: bold; font-style: italic; color: #333333; } .form-element { color: #000000; } .form-text { color: #333333; } .form-mono { font-family: monospace; } code-ba38e1e718f2/roundup/templates/extended/html/support.filter0000644000000000000000000000251307514213004023112 0ustar 00000000000000 Title Status Platform Product Version Source Assigned to Customer name code-ba38e1e718f2/roundup/templates/extended/html/support.index0000644000000000000000000000224707514213004022740 0ustar 00000000000000 code-ba38e1e718f2/roundup/templates/extended/html/support.item0000644000000000000000000000772007514213004022570 0ustar 00000000000000
Item Information
Title
Product version: Platform
Created () Last activity
Empty XXXX Source
Status Rate
Assigned To Customer Name
Superseder
View: 		Nosy List
Change Note
File
 
Messages
Timelog
:timelog">Log time against this support call
Files
:files">Attach a file to support call
code-ba38e1e718f2/roundup/templates/extended/html/timelog.index0000644000000000000000000000072507514213004022663 0ustar 00000000000000 code-ba38e1e718f2/roundup/templates/extended/html/timelog.item0000644000000000000000000000223407514213004022507 0ustar 00000000000000
Time log details
Time spent
Description
Date
Performed by
 
History
code-ba38e1e718f2/roundup/templates/extended/html/user.index0000644000000000000000000000107107514213004022174 0ustar 00000000000000 code-ba38e1e718f2/roundup/templates/extended/html/user.item0000644000000000000000000000334307514213004022027 0ustar 00000000000000
Your Details
Name
Login Name
Login Password
Phone
Organisation
E-mail address
Alternate E-mail addresses
 
History
code-ba38e1e718f2/roundup/templates/extended/instance_config.py0000644000000000000000000002634607514213004022740 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: instance_config.py,v 1.18 2002-05-25 07:16:25 rochecompaan Exp $ MAIL_DOMAIN=MAILHOST=HTTP_HOST=None HTTP_PORT=0 try: from localconfig import * except ImportError: localconfig = None import os # roundup home is this package's directory INSTANCE_HOME=os.path.split(__file__)[0] # The SMTP mail host that roundup will use to send mail if not MAILHOST: MAILHOST = 'localhost' # The domain name used for email addresses. if not MAIL_DOMAIN: MAIL_DOMAIN = 'your.tracker.email.domain.example' # the next two are only used for the standalone HTTP server. if not HTTP_HOST: HTTP_HOST = '' if not HTTP_PORT: HTTP_PORT = 9080 # This is the directory that the database is going to be stored in DATABASE = os.path.join(INSTANCE_HOME, 'db') # This is the directory that the HTML templates reside in TEMPLATES = os.path.join(INSTANCE_HOME, 'html') # A descriptive name for your roundup instance INSTANCE_NAME = 'Roundup issue tracker' # The email address that mail to roundup should go to ISSUE_TRACKER_EMAIL = 'issue_tracker@%s'%MAIL_DOMAIN # The web address that the instance is viewable at ISSUE_TRACKER_WEB = 'http://your.tracker.url.example/' # The email address that roundup will complain to if it runs into trouble ADMIN_EMAIL = 'roundup-admin@%s'%MAIL_DOMAIN # Somewhere for roundup to log stuff internally sent to stdout or stderr LOG = os.path.join(INSTANCE_HOME, 'roundup.log') # Where to place the web filtering HTML on the index page FILTER_POSITION = 'bottom' # one of 'top', 'bottom', 'top and bottom' # Deny or allow anonymous access to the web interface ANONYMOUS_ACCESS = 'deny' # either 'deny' or 'allow' # Deny or allow anonymous users to register through the web interface ANONYMOUS_REGISTER = 'deny' # either 'deny' or 'allow' # Deny or allow anonymous users to register through the mail interface ANONYMOUS_REGISTER_MAIL = 'deny' # either 'deny' or 'allow' # Send nosy messages to the author of the message MESSAGES_TO_AUTHOR = 'no' # either 'yes' or 'no' # Does the author of a message get placed on the nosy list automatically? # If 'new' is used, then the author will only be added when a message # creates a new issue. If 'yes', then the author will be added on followups # too. If 'no', they're never added to the nosy. ADD_AUTHOR_TO_NOSY = 'new' # one of 'yes', 'no', 'new' # Do the recipients (To:, Cc:) of a message get placed on the nosy list? # If 'new' is used, then the recipients will only be added when a message # creates a new issue. If 'yes', then the recipients will be added on followups # too. If 'no', they're never added to the nosy. ADD_RECIPIENTS_TO_NOSY = 'new' # either 'yes', 'no', 'new' # Where to place the email signature EMAIL_SIGNATURE_POSITION = 'bottom' # one of 'top', 'bottom', 'none' # Keep email citations EMAIL_KEEP_QUOTED_TEXT = 'no' # either 'yes' or 'no' # Preserve the email body as is EMAIL_LEAVE_BODY_UNCHANGED = 'no' # either 'yes' or 'no' # Default class to use in the mailgw if one isn't supplied in email # subjects. To disable, comment out the variable below or leave it blank. # Examples: MAIL_DEFAULT_CLASS = 'issue' # use "issue" class by default #MAIL_DEFAULT_CLASS = '' # disable (or just comment the var out) # Define what index links are available in the header, and what their # labels are. Each key is used to look up one of the index specifications # below - so 'DEFAULT' will use 'DEFAULT_INDEX'. # Where the FILTERSPEC has 'assignedto' with a value of None, it will be # replaced by the id of the logged-in user. HEADER_INDEX_LINKS = ['DEFAULT', 'ALL_SUPPORT', 'UNASSIGNED_ISSUE', 'UNASSIGNED_SUPPORT', 'MY_ISSUE', 'MY_SUPPORT'] # list the classes that users are able to add nodes to HEADER_ADD_LINKS = ['issue', 'support'] # list the classes that users can search HEADER_SEARCH_LINKS = ['issue', 'support'] SEARCH_FILTERS = ['ISSUE_FILTER', 'SUPPORT_FILTER'] # Now the DEFAULT display specifications. TODO: describe format DEFAULT_INDEX = { 'LABEL': 'All Issues', 'CLASS': 'issue', 'SORT': ['-activity'], 'GROUP': ['priority'], 'FILTER': ['status'], 'COLUMNS': ['id','activity','title','creator','assignedto'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], }, } ALL_SUPPORT_INDEX = { 'LABEL': 'All Support', 'CLASS': 'support', 'SORT': ['-activity'], 'GROUP': ['customername'], 'FILTER': ['status'], 'COLUMNS': ['id','activity','title','creator','assignedto'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], }, } # The "unsassigned issues" indexes UNASSIGNED_ISSUE_INDEX = { 'LABEL': 'Unassigned Issues', 'CLASS': 'issue', 'SORT': ['-activity'], 'GROUP': ['priority'], 'FILTER': ['status', 'assignedto'], 'COLUMNS': ['id','activity','title','creator','status'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], 'assignedto': ['-1'], }, } UNASSIGNED_SUPPORT_INDEX = { 'LABEL': 'Unassigned Support', 'CLASS': 'support', 'SORT': ['-activity'], 'GROUP': ['customername'], 'FILTER': ['status', 'assignedto'], 'COLUMNS': ['id','activity','title','creator','status'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], 'assignedto': ['-1'], }, } # The "my issues" index -- note that the user's id will replace the # 'CURRENT USER' value of the "assignedto" filterspec MY_ISSUE_INDEX = { 'LABEL': 'My Issues', 'CLASS': 'issue', 'SORT': ['-activity'], 'GROUP': ['priority'], 'FILTER': ['status', 'assignedto'], 'COLUMNS': ['id','activity','title','creator','status'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], 'assignedto': 'CURRENT USER', }, } MY_SUPPORT_INDEX = { 'LABEL': 'My Support', 'CLASS': 'support', 'SORT': ['-activity'], 'GROUP': ['customername'], 'FILTER': ['status', 'assignedto'], 'COLUMNS': ['id','activity','title','creator','status'], 'FILTERSPEC': { 'status': ['-1', '1', '2', '3', '4', '5', '6', '7'], 'assignedto': 'CURRENT USER', }, } ISSUE_FILTER = { 'CLASS': 'issue', 'FILTER': ['status', 'priority', 'assignedto', 'creator'] } SUPPORT_FILTER = { 'CLASS': 'issue', 'FILTER': ['status', 'priority', 'assignedto', 'creator'] } # # $Log: not supported by cvs2svn $ # Revision 1.17 2002/05/22 00:32:34 richard # . changed the default message list in issues to display the message body # . made backends.__init__ be more specific about which ImportErrors it really # wants to ignore # . fixed the example addresses in the templates to use correct example domains # . cleaned out the template stylesheets, removing a bunch of junk that really # wasn't necessary (font specs, styles never used) and added a style for # message content # # Revision 1.16 2002/05/21 06:05:54 richard # . #551483 ] assignedto in Client.make_index_link # # Revision 1.15 2002/05/02 07:56:34 richard # . added option to automatically add the authors and recipients of messages # to the nosy lists with the options ADD_AUTHOR_TO_NOSY (default 'new') and # ADD_RECIPIENTS_TO_NOSY (default 'new'). These settings emulate the current # behaviour. Setting them to 'yes' will add the author/recipients to the nosy # on messages that create issues and followup messages. # . added missing documentation for a few of the config option values # # Revision 1.14 2002/04/23 15:46:49 rochecompaan # . stripping of the email message body can now be controlled through # the config variables EMAIL_KEEP_QUOTED_TEST and # EMAIL_LEAVE_BODY_UNCHANGED. # # Revision 1.13.2.2 2002/05/02 11:49:19 rochecompaan # Allow customization of the search filters that should be displayed # on the search page. # # Revision 1.13.2.1 2002/04/20 13:23:34 rochecompaan # We now have a separate search page for nodes. Search links for # different classes can be customized in instance_config similar to # index links. # # Revision 1.13 2002/03/14 23:59:24 richard # . #517734 ] web header customisation is obscure # # Revision 1.12 2002/02/15 00:13:38 richard # . #503204 ] mailgw needs a default class # - partially done - the setting of additional properties can wait for a # better configuration system. # # Revision 1.11 2002/02/14 23:46:02 richard # . #516883 ] mail interface + ANONYMOUS_REGISTER # # Revision 1.10 2001/11/26 22:55:56 richard # Feature: # . Added INSTANCE_NAME to configuration - used in web and email to identify # the instance. # . Added EMAIL_SIGNATURE_POSITION to indicate where to place the roundup # signature info in e-mails. # . Some more flexibility in the mail gateway and more error handling. # . Login now takes you to the page you back to the were denied access to. # # Fixed: # . Lots of bugs, thanks Roché and others on the devel mailing list! # # Revision 1.9 2001/10/30 00:54:45 richard # Features: # . #467129 ] Lossage when username=e-mail-address # . #473123 ] Change message generation for author # . MailGW now moves 'resolved' to 'chatting' on receiving e-mail for an issue. # # Revision 1.8 2001/10/23 01:00:18 richard # Re-enabled login and registration access after lopping them off via # disabling access for anonymous users. # Major re-org of the htmltemplate code, cleaning it up significantly. Fixed # a couple of bugs while I was there. Probably introduced a couple, but # things seem to work OK at the moment. # # Revision 1.7 2001/10/22 03:25:01 richard # Added configuration for: # . anonymous user access and registration (deny/allow) # . filter "widget" location on index page (top, bottom, both) # Updated some documentation. # # Revision 1.6 2001/10/01 06:10:42 richard # stop people setting up roundup with our addresses as default - need to # handle this better in the init # # Revision 1.5 2001/08/07 00:24:43 richard # stupid typo # # Revision 1.4 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.3 2001/08/02 06:38:17 richard # Roundupdb now appends "mailing list" information to its messages which # include the e-mail address and web interface address. Templates may # override this in their db classes to include specific information (support # instructions, etc). # # Revision 1.2 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.1 2001/07/23 04:33:21 anthonybaxter # split __init__.py into 2. dbinit and instance_config. # # # vim: set filetype=python ts=4 sw=4 et si code-ba38e1e718f2/roundup/templates/extended/interfaces.py0000644000000000000000000001105107514213004021715 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: interfaces.py,v 1.16 2002-01-14 02:20:15 richard Exp $ import instance_config from roundup import cgi_client, mailgw class Client(cgi_client.ExtendedClient): ''' derives basic CGI implementation from the standard module, with any specific extensions ''' pass class MailGW(mailgw.MailGW): ''' derives basic mail gateway implementation from the standard module, with any specific extensions ''' pass # # $Log: not supported by cvs2svn $ # Revision 1.15 2002/01/02 02:32:38 richard # ANONYMOUS_ACCESS -> ANONYMOUS_REGISTER # # Revision 1.14 2001/12/20 15:43:01 rochecompaan # Features added: # . Multilink properties are now displayed as comma separated values in # a textbox # . The add user link is now only visible to the admin user # . Modified the mail gateway to reject submissions from unknown # addresses if ANONYMOUS_ACCESS is denied # # Revision 1.13 2001/11/26 23:00:53 richard # This config stuff is getting to be a real mess... # # Revision 1.12 2001/10/22 03:25:01 richard # Added configuration for: # . anonymous user access and registration (deny/allow) # . filter "widget" location on index page (top, bottom, both) # Updated some documentation. # # Revision 1.11 2001/10/09 07:38:58 richard # Pushed the base code for the extended schema CGI interface back into the # code cgi_client module so that future updates will be less painful. # Also removed a debugging print statement from cgi_client. # # Revision 1.10 2001/10/05 02:23:24 richard # . roundup-admin create now prompts for property info if none is supplied # on the command-line. # . hyperdb Class getprops() method may now return only the mutable # properties. # . Login now uses cookies, which makes it a whole lot more flexible. We can # now support anonymous user access (read-only, unless there's an # "anonymous" user, in which case write access is permitted). Login # handling has been moved into cgi_client.Client.main() # . The "extended" schema is now the default in roundup init. # . The schemas have had their page headings modified to cope with the new # login handling. Existing installations should copy the interfaces.py # file from the roundup lib directory to their instance home. # . Incorrectly had a Bizar Software copyright on the cgitb.py module from # Ping - has been removed. # . Fixed a whole bunch of places in the CGI interface where we should have # been returning Not Found instead of throwing an exception. # . Fixed a deviation from the spec: trying to modify the 'id' property of # an item now throws an exception. # # Revision 1.9 2001/08/07 00:24:43 richard # stupid typo # # Revision 1.8 2001/08/07 00:15:51 richard # Added the copyright/license notice to (nearly) all files at request of # Bizar Software. # # Revision 1.7 2001/08/02 00:43:06 richard # Even better (more useful) headings # # Revision 1.6 2001/08/02 00:36:42 richard # Made all the user-specific link names the same (My Foo) # # Revision 1.5 2001/08/01 05:15:09 richard # Added "My Issues" and "My Support" to extended template. # # Revision 1.4 2001/07/30 08:12:17 richard # Added time logging and file uploading to the templates. # # Revision 1.3 2001/07/30 01:26:59 richard # Big changes: # . split off the support priority into its own class # . added "new support, new user" to the page head # . fixed the display options for the heading links # # Revision 1.2 2001/07/29 07:01:39 richard # Added vim command to all source so that we don't get no steenkin' tabs :) # # Revision 1.1 2001/07/23 23:16:01 richard # Split off the interfaces (CGI, mailgw) into a separate file from the DB stuff. # # # vim: set filetype=python ts=4 sw=4 et si