code-7c8d3bd0deb6/share/roundup/templates/classic/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000531 13620351020 023004 0 ustar 0000000 0000000 Name: classic
Description: This is a generic issue tracker that may be used to track bugs,
feature requests, project issues or any number of other types
of issues. Most users of Roundup will find that this template
suits them, with perhaps a few customisations.
Intended-For: All first-time Roundup users
code-7c8d3bd0deb6/share/roundup/templates/classic/detectors/config.ini 0000644 0000000 0000000 00000001037 13620351020 024243 0 ustar 0000000 0000000 [statusauditor]
# Options for statusauditor.py
#
# Option: chatting_requires_two_users
# Assume an issue has a status of unread and was created by the
# demo user.
# If False, a new message on the issue sets status to chatting.
# If True, a new message sets the status to chatting only if the
# author of the new message is not demo. A message sent by demo
# keeps the issue status at unread. As a result a user can open
# a new message and add information without setting the status
# to chatting.
chatting_requires_two_users = False
code-7c8d3bd0deb6/share/roundup/templates/classic/detectors/messagesummary.py 0000644 0000000 0000000 00000000752 13620351020 025714 0 ustar 0000000 0000000 from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if 'summary' in newvalues or 'content' not in newvalues:
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/classic/detectors/nosyreaction.py 0000644 0000000 0000000 00000012467 13620351020 025375 0 ustar 0000000 0000000 #
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
#
from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError as message:
raise roundupdb.DetectorError(message)
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif 'messages' in oldvalues:
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if msgid not in m:
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if 'nosy' not in newvalues:
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if 'nosy' in newvalues:
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if 'assignedto' in newvalues and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if 'messages' in newvalues:
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.issue.react('create', nosyreaction)
db.issue.react('set', nosyreaction)
db.issue.audit('create', updatenosy)
db.issue.audit('set', updatenosy)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/classic/detectors/statusauditor.py 0000644 0000000 0000000 00000011141 13620351020 025557 0 ustar 0000000 0000000 # Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
from roundup.configuration import BooleanOption, InvalidOptionError
def chatty(db, cl, nodeid, newvalues):
''' If the issue is currently 'resolved', 'done-cbb' or None,
then set it to 'chatting'. If issue is 'unread' and
chatting_requires_two_users is true, set state
to 'chatting' if the person adding the new message is not
the same as the person who created the issue. This allows
somebody to submit multiple emails describing the problem
without changing it to 'chatting'. 'chatting' should
indicate at least two people are 'chatting'.
'''
# If set to true, change state from 'unread' to 'chatting' only
# if the author of the update is not the person who created the
# first message (and thus the issue). If false (default ini file
# setting) set 'chatting' when the second message is received.
try:
chatting_requires_two_users = BooleanOption(None,
"detector::Statusauditor",
"CHATTING_REQUIRES_TWO_USERS").str2value(
db.config.detectors[
'STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS' ]
)
except InvalidOptionError:
raise InvalidOptionError("Option STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS not found in detectors/config.ini. Contact tracker admin to fix.")
# don't fire if there's no new message (ie. chat)
if 'messages' not in newvalues:
return
if newvalues['messages'] == cl.get(nodeid, 'messages'):
return
# get the chatting state ID
try:
chatting_id = db.status.lookup('chatting')
except KeyError:
# no chatting state, ignore all this stuff
return
# get the current value
current_status = cl.get(nodeid, 'status')
# see if there's an explicit change in this transaction
if 'status' in newvalues:
# yep, skip
return
# determine the id of 'unread', 'resolved' and 'chatting'
fromstates = []
for state in 'unread resolved done-cbb'.split():
try:
fromstates.append(db.status.lookup(state))
except KeyError:
pass
unread = fromstates[0] # grab the 'unread' state which is first
# ok, there's no explicit change, so check if we are in a state that
# should be changed. First see if we should set 'chatting' based on
# who opened the issue.
if current_status == unread and chatting_requires_two_users:
# find creator of issue and compare to currentuser making
# update. If the creator is same as initial author don't
# change to 'chatting'.
issue_creator = cl.get(nodeid, 'creator')
if issue_creator == db.getuid():
# person is chatting with themselves, don't set 'chatting'
return
# Current author is not the initiator of the issue so
# we are 'chatting'.
if current_status in fromstates + [None]:
# yep, we're now chatting
newvalues['status'] = chatting_id
def presetunread(db, cl, nodeid, newvalues):
''' Make sure the status is set on new issues
'''
if 'status' in newvalues and newvalues['status']:
return
# get the unread state ID
try:
unread_id = db.status.lookup('unread')
except KeyError:
# no unread state, ignore all this stuff
return
# ok, do it
newvalues['status'] = unread_id
def init(db):
# fire before changes are made
db.issue.audit('set', chatty)
db.issue.audit('create', presetunread)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/classic/detectors/userauditor.py 0000644 0000000 0000000 00000010477 13620351020 025225 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
valid_username = re.compile('^[a-z0-9_@!%.+-]+$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if 'address' in user:
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
- username matches A-z0-9_-.@!+% (email symbols)
'''
if 'username' in newvalues:
if not valid_username.match(newvalues['username']):
raise ValueError("Username/Login Name must consist only of the letters a-z (any case), digits 0-9 and the symbols: @._-!+%")
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError('Email address syntax is invalid "%s"'%address)
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError('Email address %s already in use' % address)
newroles = newvalues.get('roles')
if newroles:
for rolename in [r.lower().strip() for r in newroles.split(',')]:
if rolename and rolename not in db.security.role:
raise ValueError('Role "%s" does not exist'%rolename)
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError('Timezone "%s" does not exist' % tz)
except ValueError:
raise ValueError('Timezone "%s" exceeds valid range [-23...23]' % tz)
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/classic/extensions/README.txt 0000644 0000000 0000000 00000000201 13620351020 024166 0 ustar 0000000 0000000 This directory is for tracker extensions:
- CGI Actions
- Templating functions
See the customisation doc for more information.
code-7c8d3bd0deb6/share/roundup/templates/classic/html/_generic.404.html 0000644 0000000 0000000 00000000674 13620351020 024222 0 ustar 0000000 0000000
Item Not Found
Item Not Found
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column. If you wish to restore a
removed item and you know its id then just put that id in the id column.
code-7c8d3bd0deb6/share/roundup/templates/classic/html/help_controls.js 0000644 0000000 0000000 00000021410 13620351020 024453 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Keyword and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
// either a checkbox object or an array of checkboxes
var check = document.frm_help.check;
if ((check.length == undefined) && (check.checked != undefined)) {
// only one checkbox on page
if (check.checked) {
list = check.value;
}
} else {
// array of checkboxes
for (box=0; box < check.length; box++) {
if (check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + check[box].value;
}
}
}
return list;
}
/**
* update the field in the opening window;
* the text_field variable must be set in the calling page
*/
function updateOpener() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = text_field.value;
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList_framed(form, textfield) {
// update the checkboxes based on the preview field
// alert('reviseList_framed')
// alert(form)
if (form.check==undefined)
return;
// alert(textfield)
var to_check;
var list = textfield.value.split(",");
if (form.check.length==undefined) {
check = form.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < form.check.length; box++) {
check = form.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
function checkRequiredFields(fields)
{
var bonk='';
var res='';
var argv = checkRequiredFields.arguments;
var argc = argv.length;
var input = '';
var val='';
for (var i=0; i < argc; i++) {
fi = argv[i];
input = document.getElementById(fi);
if (input) {
val = input.value
if (val == '' || val == '-1' || val == -1) {
if (res == '') {
res = fi;
bonk = input;
} else {
res += ', '+fi;
}
}
} else {
alert('Field with id='+fi+' not found!')
}
}
if (res == '') {
return submit_once();
} else {
alert('Missing value here ('+res+')!');
if (window.event && window.event.returnvalue) {
event.returnValue = 0; // work-around for IE
}
bonk.focus();
return false;
}
}
/**
* seeks the given value (2nd argument)
* in the value of the given input element (1st argument),
* which is considered a list of values, separated by commas
*/
function has_value(input, val)
{
var actval = input.value
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i remove_val()
*
* This will work nicely even for batched lists
*/
function append_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
if (actval == '') {
feld.value = val
} else {
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i append_val()
*/
function remove_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
var changed=false;
if (actval == '') {
return
} else {
var arr = feld.value.split(',');
var max = arr.length;
var neu = ''
for (i=0;iList of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
code-7c8d3bd0deb6/share/roundup/templates/classic/html/query.item.html 0000644 0000000 0000000 00000001133 13620351020 024232 0 ustar 0000000 0000000
You can not view query
You can not view query.
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-7c8d3bd0deb6/share/roundup/templates/classic/html/user_utils.js 0000644 0000000 0000000 00000006001 13620351020 023775 0 ustar 0000000 0000000 // User Editing Utilities
/**
* for new users:
* Depending on the input field which calls it, takes the value
* and dispatches it to certain other input fields:
*
* address
* +-> username
* | `-> realname
* `-> organisation
*/
function split_name(that) {
var raw = that.value
var val = trim(raw)
if (val == '') {
return
}
var username=''
var realname=''
var address=''
switch (that.name) {
case 'address':
address=val
break
case 'username':
username=val
break
case 'realname':
realname=val
break
case 'firstname':
case 'lastname':
return
default:
alert('Ooops - unknown name field '+that.name+'!')
return
}
var the_form = that.form;
function field_empty(name) {
return the_form[name].value == ''
}
// no break statements - on purpose!
switch (that.name) {
case 'address':
var split1 = address.split('@')
if (field_empty('username')) {
username = split1[0]
the_form.username.value = username
}
if (field_empty('organisation')) {
the_form.organisation.value = default_organisation(split1[1])
}
case 'username':
if (field_empty('realname')) {
realname = Cap(username.split('.').join(' '))
the_form.realname.value = realname
}
case 'realname':
if (field_empty('username')) {
username = Cap(realname.replace(' ', '.'))
the_form.username.value = username
}
if (the_form.firstname && the_form.lastname) {
var split2 = realname.split(' ')
var firstname='', lastname=''
firstname = split2[0]
lastname = split2.slice(1).join(' ')
if (field_empty('firstname')) {
the_form.firstname.value = firstname
}
if (field_empty('lastname')) {
the_form.lastname.value = lastname
}
}
}
}
function SubCap(str) {
switch (str) {
case 'de': case 'do': case 'da':
case 'du': case 'von':
return str;
}
if (str.toLowerCase().slice(0,2) == 'mc') {
return 'Mc'+str.slice(2,3).toUpperCase()+str.slice(3).toLowerCase()
}
return str.slice(0,1).toUpperCase()+str.slice(1).toLowerCase()
}
function Cap(str) {
var liz = str.split(' ')
for (var i=0; i/db/files/]
# type = String() [MIME type of the content, default 'text/plain']
msg = FileClass(db, "msg",
author=Link("user", do_journal='no'),
recipients=Multilink("user", do_journal='no'),
date=Date(),
summary=String(),
files=Multilink("file"),
messageid=String(),
inreplyto=String())
file = FileClass(db, "file",
name=String())
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# nosy = Multilink("user")
# superseder = Multilink("issue")
issue = IssueClass(db, "issue",
assignedto=Link("user"),
keyword=Multilink("keyword"),
priority=Link("priority"),
status=Link("status"))
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
db.security.addPermissionToRole('User', 'Web Access')
db.security.addPermissionToRole('User', 'Email Access')
db.security.addPermissionToRole('User', 'Rest Access')
db.security.addPermissionToRole('User', 'Xmlrpc Access')
# Assign the access and edit Permissions for issue, file and message
# to regular users now
for cl in 'issue', 'file', 'msg', 'keyword':
db.security.addPermissionToRole('User', 'View', cl)
db.security.addPermissionToRole('User', 'Edit', cl)
db.security.addPermissionToRole('User', 'Create', cl)
for cl in 'priority', 'status':
db.security.addPermissionToRole('User', 'View', cl)
# May users view other user information? Comment these lines out
# if you don't want them to
p = db.security.addPermission(name='View', klass='user',
properties=('id', 'organisation', 'phone', 'realname', 'timezone',
'username'))
db.security.addPermissionToRole('User', p)
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
properties=('username', 'password', 'address', 'realname', 'phone',
'organisation', 'alternate_addresses', 'queries', 'timezone'),
description="User is allowed to edit their own user details")
db.security.addPermissionToRole('User', p)
# Users should be able to edit and view their own queries. They should also
# be able to view any marked as not private. They should not be able to
# edit others' queries, even if they're not private
def view_query(db, userid, itemid):
private_for = db.query.get(itemid, 'private_for')
if not private_for: return True
return userid == private_for
def edit_query(db, userid, itemid):
return userid == db.query.get(itemid, 'creator')
p = db.security.addPermission(name='View', klass='query', check=view_query,
description="User is allowed to view their own and public queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Search', klass='query')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='query', check=edit_query,
description="User is allowed to edit their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Retire', klass='query', check=edit_query,
description="User is allowed to retire their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Restore', klass='query', check=edit_query,
description="User is allowed to restore their queries")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='query',
description="User is allowed to create queries")
db.security.addPermissionToRole('User', p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
# This is disabled by default to stop spam from auto-registering users on
# public trackers.
#db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's Anonymous
# Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Register', 'user')
# Allow anonymous users access to view issues (and the related, linked
# information)
for cl in 'issue', 'file', 'msg', 'keyword', 'priority', 'status':
db.security.addPermissionToRole('Anonymous', 'View', cl)
# Allow the anonymous user to use the "Show Unassigned" search.
# It acts like "Show Open" if this permission is not available.
# If you are running a tracker that does not allow read access for
# anonymous, you should remove this entry as it can be used to perform
# a username guessing attack against a roundup install.
p = db.security.addPermission(name='Search', klass='user')
db.security.addPermissionToRole ('Anonymous', p)
# [OPTIONAL]
# Allow anonymous users access to create or edit "issue" items (and the
# related file and message items)
#for cl in 'issue', 'file', 'msg':
# db.security.addPermissionToRole('Anonymous', 'Create', cl)
# db.security.addPermissionToRole('Anonymous', 'Edit', cl)
# vim: set filetype=python sts=4 sw=4 et si :
code-7c8d3bd0deb6/share/roundup/templates/devel/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000505 13620351020 022463 0 ustar 0000000 0000000 Name: devel
Description: This is a generic issue tracker that may be used to track bugs,
feature requests, project issues or any number of other types
of issues. Most users of Roundup will find that this template
suits them, with perhaps a few customisations.
Intended-For: Developers
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/messagesummary.py 0000644 0000000 0000000 00000000752 13620351020 025372 0 ustar 0000000 0000000 from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if 'summary' in newvalues or 'content' not in newvalues:
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/no_texthtml.py 0000644 0000000 0000000 00000000411 13620351020 024665 0 ustar 0000000 0000000
def audit_html_files(db, cl, nodeid, newvalues):
if 'type' in newvalues and newvalues['type'] == 'text/html':
newvalues['type'] = 'text/plain'
def init(db):
db.file.audit('set', audit_html_files)
db.file.audit('create', audit_html_files)
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/nosyreaction.py 0000644 0000000 0000000 00000011344 13620351020 025044 0 ustar 0000000 0000000 from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError as message:
raise roundupdb.DetectorError(message)
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif 'messages' in oldvalues:
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if msgid not in m:
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if 'nosy' not in newvalues:
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if 'nosy' in newvalues:
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if 'assignedto' in newvalues and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if 'messages' in newvalues:
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.bug.react('create', nosyreaction)
db.bug.react('set', nosyreaction)
db.bug.audit('create', updatenosy)
db.bug.audit('set', updatenosy)
db.task.react('create', nosyreaction)
db.task.react('set', nosyreaction)
db.task.audit('create', updatenosy)
db.task.audit('set', updatenosy)
db.milestone.react('create', nosyreaction)
db.milestone.react('set', nosyreaction)
db.milestone.audit('create', updatenosy)
db.milestone.audit('set', updatenosy)
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/patches.py 0000644 0000000 0000000 00000002763 13620351020 023763 0 ustar 0000000 0000000 # Auditor for patch files
# Patches should be declared as text/plain (also .py files),
# independent of what the browser says, and
# the "patch" keyword should get set automatically.
import posixpath
patchtypes = ('.diff', '.patch')
sourcetypes = ('.diff', '.patch', '.py')
def ispatch(file, types):
return posixpath.splitext(file)[1] in types
def patches_text_plain(db, cl, nodeid, newvalues):
if ispatch(newvalues['name'], sourcetypes):
newvalues['type'] = 'text/plain'
def patches_keyword(db, cl, nodeid, newvalues):
# Check whether there are any new files
newfiles = set(newvalues.get('files',()))
if nodeid:
newfiles -= set(db.bug.get(nodeid, 'files'))
# Check whether any of these is a patch
newpatch = False
for fileid in newfiles:
if ispatch(db.file.get(fileid, 'name'), patchtypes):
newpatch = True
break
if newpatch:
# Add the patch keyword if its not already there
patchid = db.keyword.lookup("patch")
oldkeywords = []
if nodeid:
oldkeywords = db.bug.get(nodeid, 'keywords')
if patchid in oldkeywords:
# This is already marked as a patch
return
if 'keywords' not in newvalues:
newvalues['keywords'] = oldkeywords
newvalues['keywords'].append(patchid)
def init(db): pass
# db.file.audit('create', patches_text_plain)
# db.bug.audit('create', patches_keyword)
# db.bug.audit('set', patches_keyword)
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/severityauditor.py 0000644 0000000 0000000 00000000465 13620351020 025573 0 ustar 0000000 0000000
def init_severity(db, cl, nodeid, newvalues):
"""Make sure severity is set on new bugs"""
if 'severity' in newvalues and newvalues['severity']:
return
normal = db.severity.lookup('normal')
newvalues['severity'] = normal
def init(db): pass
#db.bug.audit('create', init_severity)
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/statusauditor.py 0000644 0000000 0000000 00000000505 13620351020 025237 0 ustar 0000000 0000000 def preset_new(db, cl, nodeid, newvalues):
""" Make sure the status is set on new bugs"""
if 'status' in newvalues and newvalues['status']:
return
new = db.status.lookup('new')
newvalues['status'] = new
def init(db): pass
# fire before changes are made
#db.bug.audit('create', preset_new)
code-7c8d3bd0deb6/share/roundup/templates/devel/detectors/userauditor.py 0000644 0000000 0000000 00000010477 13620351020 024703 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
valid_username = re.compile('^[a-z0-9_@!%.+-]+$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if 'address' in user:
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
- username matches A-z0-9_-.@!+% (email symbols)
'''
if 'username' in newvalues:
if not valid_username.match(newvalues['username']):
raise ValueError("Username/Login Name must consist only of the letters a-z (any case), digits 0-9 and the symbols: @._-!+%")
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError('Email address syntax is invalid "%s"'%address)
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError('Email address %s already in use' % address)
newroles = newvalues.get('roles')
if newroles:
for rolename in [r.lower().strip() for r in newroles.split(',')]:
if rolename and rolename not in db.security.role:
raise ValueError('Role "%s" does not exist'%rolename)
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError('Timezone "%s" does not exist' % tz)
except ValueError:
raise ValueError('Timezone "%s" exceeds valid range [-23...23]' % tz)
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/devel/extensions/local_replace.py 0000644 0000000 0000000 00000005224 13620351020 025317 0 ustar 0000000 0000000 from __future__ import print_function
import re
hg_url_base = r'http://sourceforge.net/p/roundup/code/ci/'
substitutions = [ (re.compile(r'debian:\#(?P\d+)'),
r'debian#\g' ),
(re.compile(r'\#(?P\s*)(?P\d+)'),
r"#\g\g" ),
(re.compile(r'(?P^|\s+)issue(?P\s*)(?P\d+)'),
r"\gissue\g\g" ),
# matching the typical number:hash format of hg's own output
# and then use use hash instead of the number
(re.compile(r'(?P(^|\s+))(?P(rev|hg|changeset: ))(?P\d+):(?P[0-9a-fA-F]{12,40})(?P\W+|$)'),
r'\g\g\g:\g\g'),
# matching hg revison number or hash
(re.compile(r'(?P(^|\s+))(?P(revision|rev|r)\s?)(?P([1-9][0-9]*)|[0-9a-fA-F]{4,40})(?P\W+|$)'),
r'\g\g\g\g'),
]
def local_replace(message):
for cre, replacement in substitutions:
message = cre.sub(replacement, message)
return message
def init(instance):
instance.registerUtil('localReplace', local_replace)
def quicktest(msgstr, should_replace = True):
testcount['run'] += 1
replacedstr = local_replace(msgstr)
if not (not replacedstr == msgstr ) == should_replace:
print("(fail)", end=' ')
testcount['failed'] += 1
if replacedstr == msgstr:
print( "'%s'" % (msgstr,))
else:
print("'%s' -> '%s'" % (msgstr, replacedstr))
if "__main__" == __name__:
testcount = {'run':0 , 'failed': 0}
print("Replacement examples:")
quicktest(" debian:#222")
quicktest(" #555")
quicktest("issue333")
quicktest(" revision 222")
quicktest(" r 222")
quicktest(" wordthatendswithr 222", False)
quicktest(" references", False)
quicktest(" too many spaces r 222", False)
quicktest("re-evaluate", False)
quicktest("rex140eb", False)
quicktest("rev 012", False) # too short for a hg hash
quicktest("rev 0123")
quicktest("re140eb")
quicktest(" r7140eb")
quicktest(" rev7140eb ")
quicktest("rev7140eb")
quicktest("rev7140eb,")
quicktest("rev4891:ad3d628e73f2")
quicktest("hg4891:ad3d628e73f2")
quicktest("changeset: 4542:46239c21a1eb")
print()
print(testcount)
code-7c8d3bd0deb6/share/roundup/templates/devel/extensions/spambayes.py 0000644 0000000 0000000 00000005222 13620351020 024514 0 ustar 0000000 0000000 import re, math
from roundup.cgi.actions import Action
from roundup.cgi.exceptions import *
from roundup.anypy import xmlrpc_
import socket
REVPAT = re.compile(r'(r[0-9]+\b|rev(ision)? [0-9]+\b)')
def extract_classinfo(db, classname, nodeid):
node = db.getnode(classname, nodeid)
authorage = node['creation'].timestamp() - \
db.getnode('user', node.get('author', node.get('creator')))['creation'].timestamp()
authorid = node.get('author', node.get('creator'))
content = db.getclass(classname).get(nodeid, 'content')
tokens = ["klass:%s" % classname,
"author:%s" % authorid,
"authorage:%d" % int(math.log(authorage)),
"hasrev:%s" % (REVPAT.search(content) is not None)]
return (content, tokens)
def train_spambayes(db, content, tokens, is_spam):
spambayes_uri = db.config.detectors['SPAMBAYES_URI']
server = xmlrpc_.client.ServerProxy(spambayes_uri, verbose=False)
try:
server.train({'content':content}, tokens, {}, is_spam)
return (True, None)
except (socket.error, xmlrpc_.client.Error) as e:
return (False, str(e))
class SpambayesClassify(Action):
permissionType = 'SB: May Classify'
def handle(self):
(content, tokens) = extract_classinfo(self.db,
self.classname, self.nodeid)
if "trainspam" in self.form:
is_spam = True
elif "trainham" in self.form:
is_spam = False
(status, errmsg) = train_spambayes(self.db, content, tokens,
is_spam)
node = self.db.getnode(self.classname, self.nodeid)
props = {}
if status:
if node.get('spambayes_misclassified', False):
props['spambayes_misclassified'] = True
props['spambayes_score'] = 1.0
s = " SPAM"
if not is_spam:
props['spambayes_score'] = 0.0
s = " HAM"
self.client.add_ok_message(self._('Message classified as') + s)
else:
self.client.add_error_message(self._('Unable to classify message, got error:') + errmsg)
klass = self.db.getclass(self.classname)
klass.set(self.nodeid, **props)
self.db.commit()
def sb_is_spam(obj):
cutoff_score = float(obj._db.config.detectors['SPAMBAYES_SPAM_CUTOFF'])
try:
score = obj['spambayes_score']
except KeyError:
return False
return score >= cutoff_score
def init(instance):
instance.registerAction("spambayes_classify", SpambayesClassify)
instance.registerUtil('sb_is_spam', sb_is_spam)
code-7c8d3bd0deb6/share/roundup/templates/devel/extensions/timezone.py 0000644 0000000 0000000 00000001614 13620351020 024363 0 ustar 0000000 0000000 # Utility for replacing the simple input field for the timezone with
# a select-field that lists the available values.
import cgi
try:
import pytz
except ImportError:
pytz = None
def tzfield(prop, name, default):
if pytz:
value = prop.plain()
if '' == value:
value = default
else:
try:
value = "Etc/GMT%+d" % int(value)
except ValueError:
pass
l = ['')
return '\n'.join(l)
else:
return prop.field()
def init(instance):
instance.registerUtil('tzfield', tzfield)
code-7c8d3bd0deb6/share/roundup/templates/devel/html/_generic.404.html 0000644 0000000 0000000 00000000674 13620351020 023700 0 ustar 0000000 0000000
Item Not Found
Item Not Found
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column.
code-7c8d3bd0deb6/share/roundup/templates/devel/html/favicon.ico 0000644 0000000 0000000 00000035356 13620351020 023057 0 ustar 0000000 0000000 h 6 00 % F ( @ 5 B G E 8 ?L9/& { ; ND:0& @ XND:0% A 5 , ! < 5bXN=4*!y A u@os=p: KlbXNC9/$ z 4}CרyAt=K2 [olaWMC9.$ AF}Dx@g6 NnjaWMB8.$ GJG|Cv?i6E1\ L H G AEkA8-# FMIF{Bu>p;j7i6h5`2 OEB7- =ÏPLHEyAt=o:i6i6i6`2 CKA6 $ƑROKH}Dx@s=m9i6i6i6 HUJ>
ďN~LH}Ct=l9f6l8i6i6 H IF{Bu>p;j7i6 A LEyAt>o:i6 ( NJH~Dx@q94/*% | D ! OMHC>94/*%s{z 3
WRMHC>94/* : [VRMHC=94/ ; `[VQMHC=83/*% ,
e`[VQLGC=83.)% ' $ 7 A F 6je`[VQL Z N H H H H H H H H H F A 6 !
v>vzBبy@xAv? Hoje`[VQLGB=83.)$ { C ! }DFE|CzBx@ Htojd_[VQLGB=83.)$ { 9 H HGF~D|CyA Iusojd_ZUQLGB=83.)$ H IJIGF}D{B Muusnid_ZUPLGB=82.)$ ud -KKJHGE}CuR+otuusnid_ZUPKFB=82-($ 8MLKIHF~Ep=auuusnid_ZUPKFA<82-(# ÏPOMKJHGE}Dp:bF#e L I H H H H H H HGفMKFA<72-(" <őQÏPNMKJHFE|CzBx@v?s=qs=p;n:l8j6i6i6h5dF$pMKFA<72* .ǓSǒRĐPOMLJIGF~D{ByAw?t>r * ̓U~ʕTǒRĐQONLJIGF~D|CyAw@u>s=p;n9l8i6i6 H^YTOJA ̖SkǓRƒRďPOMLJIGE}D{ByAw?t>rs=q;o:l8 H ONLJIGF~D{CyAw?u>rrm9 ɐOCƐPĐPOMLJIGF~D{ByAt= ǛXĐRO˿MؾMKJHF~CتzBw?\ ( 0 ` %
# . 6 : = B E A = : 3 + ! 3,s.,+&%# ݞ o L @ . 9C<<:730-)&# `|Z > BPFC@=:730-)&# r > K3LJGC@=9630-)&" C$ a~Y + RPMJGC@=9630-)&"^ݞ 9 VTPMJGC@=9630,)i A ZWTPMJFC@=963/,^ G ]ZWTPMIFC@=962/,I I `]ZWTPMIFC@=962/,)&" I d`]ZVSPMIFC?<962/,(%" 7 gd`]YVSPMIFC?<962/,(%" + - ? G I I I 7jgd`]YVSPMI \ P I I I I I I I I I I I I I I I I F ; ' j;+u>zBzByAw@v?t> Imjfc`]YVSOLIFC?<952/,(%" ӓ L 2 nD%}D~E}C{BzAx@w?u> Ipmjfc`]YVSOLIFC?<852/,(%! O + EرFE~D|C{ByAx@v? Itpmjfc`]YVSOLIFB?<852/+(%! ڟ C DoHGFE}D|CzByAw@ Iuspmjfc`\YVSOLIEB?<852.+(%!
a~Y + IضIHGF~E}D{CzBxA Iuuspmjfc_\YVSOLHEB?<852.+(%! ӓ = KKJIGFE~D|C{BzA Ksuuspmjfc_\YVSOLHEB?<852.+(%! J HmKJIHGFE~D|C{BS< Yruuusplifc_\YUROLHEB>;852.+'$!
yc )LLKJIHGFE}D|C_4juuuusolifc_\YUROLHEB>;852.+'$! Ւ 2LؽMLKJIHGF~E}DwA Pruuuusolifc_\YUROLHEB>;851.+'$! :N㿋NLKJIHGFE~D|Ce7J`ruuuusolieb_\YUROKHEB>;841.+'$! <ONMLKJIHGFE~D|Ce7<{Yjruuusolieb_\YURNKHEB>;841.+'$! <ÏPONMLKJIHGFE}D|Cv?م_4 Q K I I I I I I I I I I I G9YLMKHEB>;841.+'$ <ŐQÎPONMLKJIHGF~E}C{BzAx@w?u>t=r;841-*'" 9ŏPĐQPONLKJIHGFE~D|C{ByAx@v?u>s=r;841-*% 1ƑQőQďPONMLKJIHGFE~D|C{ByAw@v?t>s=q;741-% )ǑQǒRŐQÏPONMLKJIHGFE}D|CzByAw@v?t>s=qt=rs=rs=qs=qt=rs=rs=qs=qt=rs=rs=qt=rs=rs=qs=l8 ǐRƑRĐQǕ[ܿƧXLKJIHGF~E}C{BzAx@w?u>r<^3F
ǛXŒPƑQĐPONMLKJIHGFE~D|C{ByAx@t>j7e ǛXőQďOÏPONMLKJIHGFE}D|CzBw?؝nList of files - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" />List of files
code-7c8d3bd0deb6/share/roundup/templates/devel/html/help_controls.js 0000644 0000000 0000000 00000021406 13620351020 024136 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Topic and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
// either a checkbox object or an array of checkboxes
var check = document.frm_help.check;
if ((check.length == undefined) && (check.checked != undefined)) {
// only one checkbox on page
if (check.checked) {
list = check.value;
}
} else {
// array of checkboxes
for (box=0; box < check.length; box++) {
if (check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + check[box].value;
}
}
}
return list;
}
/**
* update the field in the opening window;
* the text_field variable must be set in the calling page
*/
function updateOpener() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = text_field.value;
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList_framed(form, textfield) {
// update the checkboxes based on the preview field
// alert('reviseList_framed')
// alert(form)
if (form.check==undefined)
return;
// alert(textfield)
var to_check;
var list = textfield.value.split(",");
if (form.check.length==undefined) {
check = form.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < form.check.length; box++) {
check = form.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
function checkRequiredFields(fields)
{
var bonk='';
var res='';
var argv = checkRequiredFields.arguments;
var argc = argv.length;
var input = '';
var val='';
for (var i=0; i < argc; i++) {
fi = argv[i];
input = document.getElementById(fi);
if (input) {
val = input.value
if (val == '' || val == '-1' || val == -1) {
if (res == '') {
res = fi;
bonk = input;
} else {
res += ', '+fi;
}
}
} else {
alert('Field with id='+fi+' not found!')
}
}
if (res == '') {
return submit_once();
} else {
alert('Missing value here ('+res+')!');
if (window.event && window.event.returnvalue) {
event.returnValue = 0; // work-around for IE
}
bonk.focus();
return false;
}
}
/**
* seeks the given value (2nd argument)
* in the value of the given input element (1st argument),
* which is considered a list of values, separated by commas
*/
function has_value(input, val)
{
var actval = input.value
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i remove_val()
*
* This will work nicely even for batched lists
*/
function append_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
if (actval == '') {
feld.value = val
} else {
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i append_val()
*/
function remove_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
var changed=false;
if (actval == '') {
return
} else {
var arr = feld.value.split(',');
var max = arr.length;
var neu = ''
for (i=0;iList of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
code-7c8d3bd0deb6/share/roundup/templates/devel/html/home.html 0000644 0000000 0000000 00000000743 13620351020 022544 0 ustar 0000000 0000000
code-7c8d3bd0deb6/share/roundup/templates/devel/html/jquery.js 0000644 0000000 0000000 00000353673 13620351020 022620 0 ustar 0000000 0000000 /*!
* jQuery JavaScript Library v1.3.2
* http://jquery.com/
*
* Copyright (c) 2009 John Resig
* Dual licensed under the MIT and GPL licenses.
* http://docs.jquery.com/License
*
* Date: 2009-02-19 17:34:21 -0500 (Thu, 19 Feb 2009)
* Revision: 6246
*/
(function(){
var
// Will speed up references to window, and allows munging its name.
window = this,
// Will speed up references to undefined, and allows munging its name.
undefined,
// Map over jQuery in case of overwrite
_jQuery = window.jQuery,
// Map over the $ in case of overwrite
_$ = window.$,
jQuery = window.jQuery = window.$ = function( selector, context ) {
// The jQuery object is actually just the init constructor 'enhanced'
return new jQuery.fn.init( selector, context );
},
// A simple way to check for HTML strings or ID strings
// (both of which we optimize for)
quickExpr = /^[^<]*(<(.|\s)+>)[^>]*$|^#([\w-]+)$/,
// Is it a simple selector
isSimple = /^.[^:#\[\.,]*$/;
jQuery.fn = jQuery.prototype = {
init: function( selector, context ) {
// Make sure that a selection was provided
selector = selector || document;
// Handle $(DOMElement)
if ( selector.nodeType ) {
this[0] = selector;
this.length = 1;
this.context = selector;
return this;
}
// Handle HTML strings
if ( typeof selector === "string" ) {
// Are we dealing with HTML string or an ID?
var match = quickExpr.exec( selector );
// Verify a match, and that no context was specified for #id
if ( match && (match[1] || !context) ) {
// HANDLE: $(html) -> $(array)
if ( match[1] )
selector = jQuery.clean( [ match[1] ], context );
// HANDLE: $("#id")
else {
var elem = document.getElementById( match[3] );
// Handle the case where IE and Opera return items
// by name instead of ID
if ( elem && elem.id != match[3] )
return jQuery().find( selector );
// Otherwise, we inject the element directly into the jQuery object
var ret = jQuery( elem || [] );
ret.context = document;
ret.selector = selector;
return ret;
}
// HANDLE: $(expr, [context])
// (which is just equivalent to: $(content).find(expr)
} else
return jQuery( context ).find( selector );
// HANDLE: $(function)
// Shortcut for document ready
} else if ( jQuery.isFunction( selector ) )
return jQuery( document ).ready( selector );
// Make sure that old selector state is passed along
if ( selector.selector && selector.context ) {
this.selector = selector.selector;
this.context = selector.context;
}
return this.setArray(jQuery.isArray( selector ) ?
selector :
jQuery.makeArray(selector));
},
// Start with an empty selector
selector: "",
// The current version of jQuery being used
jquery: "1.3.2",
// The number of elements contained in the matched element set
size: function() {
return this.length;
},
// Get the Nth element in the matched element set OR
// Get the whole matched element set as a clean array
get: function( num ) {
return num === undefined ?
// Return a 'clean' array
Array.prototype.slice.call( this ) :
// Return just the object
this[ num ];
},
// Take an array of elements and push it onto the stack
// (returning the new matched element set)
pushStack: function( elems, name, selector ) {
// Build a new jQuery matched element set
var ret = jQuery( elems );
// Add the old object onto the stack (as a reference)
ret.prevObject = this;
ret.context = this.context;
if ( name === "find" )
ret.selector = this.selector + (this.selector ? " " : "") + selector;
else if ( name )
ret.selector = this.selector + "." + name + "(" + selector + ")";
// Return the newly-formed element set
return ret;
},
// Force the current matched set of elements to become
// the specified array of elements (destroying the stack in the process)
// You should use pushStack() in order to do this, but maintain the stack
setArray: function( elems ) {
// Resetting the length to 0, then using the native Array push
// is a super-fast way to populate an object with array-like properties
this.length = 0;
Array.prototype.push.apply( this, elems );
return this;
},
// Execute a callback for every element in the matched set.
// (You can seed the arguments with an array of args, but this is
// only used internally.)
each: function( callback, args ) {
return jQuery.each( this, callback, args );
},
// Determine the position of an element within
// the matched set of elements
index: function( elem ) {
// Locate the position of the desired element
return jQuery.inArray(
// If it receives a jQuery object, the first element is used
elem && elem.jquery ? elem[0] : elem
, this );
},
attr: function( name, value, type ) {
var options = name;
// Look for the case where we're accessing a style value
if ( typeof name === "string" )
if ( value === undefined )
return this[0] && jQuery[ type || "attr" ]( this[0], name );
else {
options = {};
options[ name ] = value;
}
// Check to see if we're setting style values
return this.each(function(i){
// Set all the styles
for ( name in options )
jQuery.attr(
type ?
this.style :
this,
name, jQuery.prop( this, options[ name ], type, i, name )
);
});
},
css: function( key, value ) {
// ignore negative width and height values
if ( (key == 'width' || key == 'height') && parseFloat(value) < 0 )
value = undefined;
return this.attr( key, value, "curCSS" );
},
text: function( text ) {
if ( typeof text !== "object" && text != null )
return this.empty().append( (this[0] && this[0].ownerDocument || document).createTextNode( text ) );
var ret = "";
jQuery.each( text || this, function(){
jQuery.each( this.childNodes, function(){
if ( this.nodeType != 8 )
ret += this.nodeType != 1 ?
this.nodeValue :
jQuery.fn.text( [ this ] );
});
});
return ret;
},
wrapAll: function( html ) {
if ( this[0] ) {
// The elements to wrap the target around
var wrap = jQuery( html, this[0].ownerDocument ).clone();
if ( this[0].parentNode )
wrap.insertBefore( this[0] );
wrap.map(function(){
var elem = this;
while ( elem.firstChild )
elem = elem.firstChild;
return elem;
}).append(this);
}
return this;
},
wrapInner: function( html ) {
return this.each(function(){
jQuery( this ).contents().wrapAll( html );
});
},
wrap: function( html ) {
return this.each(function(){
jQuery( this ).wrapAll( html );
});
},
append: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.appendChild( elem );
});
},
prepend: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.insertBefore( elem, this.firstChild );
});
},
before: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this );
});
},
after: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this.nextSibling );
});
},
end: function() {
return this.prevObject || jQuery( [] );
},
// For internal use only.
// Behaves like an Array's method, not like a jQuery method.
push: [].push,
sort: [].sort,
splice: [].splice,
find: function( selector ) {
if ( this.length === 1 ) {
var ret = this.pushStack( [], "find", selector );
ret.length = 0;
jQuery.find( selector, this[0], ret );
return ret;
} else {
return this.pushStack( jQuery.unique(jQuery.map(this, function(elem){
return jQuery.find( selector, elem );
})), "find", selector );
}
},
clone: function( events ) {
// Do the clone
var ret = this.map(function(){
if ( !jQuery.support.noCloneEvent && !jQuery.isXMLDoc(this) ) {
// IE copies events bound via attachEvent when
// using cloneNode. Calling detachEvent on the
// clone will also remove the events from the orignal
// In order to get around this, we use innerHTML.
// Unfortunately, this means some modifications to
// attributes in IE that are actually only stored
// as properties will not be copied (such as the
// the name attribute on an input).
var html = this.outerHTML;
if ( !html ) {
var div = this.ownerDocument.createElement("div");
div.appendChild( this.cloneNode(true) );
html = div.innerHTML;
}
return jQuery.clean([html.replace(/ jQuery\d+="(?:\d+|null)"/g, "").replace(/^\s*/, "")])[0];
} else
return this.cloneNode(true);
});
// Copy the events from the original to the clone
if ( events === true ) {
var orig = this.find("*").andSelf(), i = 0;
ret.find("*").andSelf().each(function(){
if ( this.nodeName !== orig[i].nodeName )
return;
var events = jQuery.data( orig[i], "events" );
for ( var type in events ) {
for ( var handler in events[ type ] ) {
jQuery.event.add( this, type, events[ type ][ handler ], events[ type ][ handler ].data );
}
}
i++;
});
}
// Return the cloned set
return ret;
},
filter: function( selector ) {
return this.pushStack(
jQuery.isFunction( selector ) &&
jQuery.grep(this, function(elem, i){
return selector.call( elem, i );
}) ||
jQuery.multiFilter( selector, jQuery.grep(this, function(elem){
return elem.nodeType === 1;
}) ), "filter", selector );
},
closest: function( selector ) {
var pos = jQuery.expr.match.POS.test( selector ) ? jQuery(selector) : null,
closer = 0;
return this.map(function(){
var cur = this;
while ( cur && cur.ownerDocument ) {
if ( pos ? pos.index(cur) > -1 : jQuery(cur).is(selector) ) {
jQuery.data(cur, "closest", closer);
return cur;
}
cur = cur.parentNode;
closer++;
}
});
},
not: function( selector ) {
if ( typeof selector === "string" )
// test special case where just one selector is passed in
if ( isSimple.test( selector ) )
return this.pushStack( jQuery.multiFilter( selector, this, true ), "not", selector );
else
selector = jQuery.multiFilter( selector, this );
var isArrayLike = selector.length && selector[selector.length - 1] !== undefined && !selector.nodeType;
return this.filter(function() {
return isArrayLike ? jQuery.inArray( this, selector ) < 0 : this != selector;
});
},
add: function( selector ) {
return this.pushStack( jQuery.unique( jQuery.merge(
this.get(),
typeof selector === "string" ?
jQuery( selector ) :
jQuery.makeArray( selector )
)));
},
is: function( selector ) {
return !!selector && jQuery.multiFilter( selector, this ).length > 0;
},
hasClass: function( selector ) {
return !!selector && this.is( "." + selector );
},
val: function( value ) {
if ( value === undefined ) {
var elem = this[0];
if ( elem ) {
if( jQuery.nodeName( elem, 'option' ) )
return (elem.attributes.value || {}).specified ? elem.value : elem.text;
// We need to handle select boxes special
if ( jQuery.nodeName( elem, "select" ) ) {
var index = elem.selectedIndex,
values = [],
options = elem.options,
one = elem.type == "select-one";
// Nothing was selected
if ( index < 0 )
return null;
// Loop through all the selected options
for ( var i = one ? index : 0, max = one ? index + 1 : options.length; i < max; i++ ) {
var option = options[ i ];
if ( option.selected ) {
// Get the specifc value for the option
value = jQuery(option).val();
// We don't need an array for one selects
if ( one )
return value;
// Multi-Selects return an array
values.push( value );
}
}
return values;
}
// Everything else, we just grab the value
return (elem.value || "").replace(/\r/g, "");
}
return undefined;
}
if ( typeof value === "number" )
value += '';
return this.each(function(){
if ( this.nodeType != 1 )
return;
if ( jQuery.isArray(value) && /radio|checkbox/.test( this.type ) )
this.checked = (jQuery.inArray(this.value, value) >= 0 ||
jQuery.inArray(this.name, value) >= 0);
else if ( jQuery.nodeName( this, "select" ) ) {
var values = jQuery.makeArray(value);
jQuery( "option", this ).each(function(){
this.selected = (jQuery.inArray( this.value, values ) >= 0 ||
jQuery.inArray( this.text, values ) >= 0);
});
if ( !values.length )
this.selectedIndex = -1;
} else
this.value = value;
});
},
html: function( value ) {
return value === undefined ?
(this[0] ?
this[0].innerHTML.replace(/ jQuery\d+="(?:\d+|null)"/g, "") :
null) :
this.empty().append( value );
},
replaceWith: function( value ) {
return this.after( value ).remove();
},
eq: function( i ) {
return this.slice( i, +i + 1 );
},
slice: function() {
return this.pushStack( Array.prototype.slice.apply( this, arguments ),
"slice", Array.prototype.slice.call(arguments).join(",") );
},
map: function( callback ) {
return this.pushStack( jQuery.map(this, function(elem, i){
return callback.call( elem, i, elem );
}));
},
andSelf: function() {
return this.add( this.prevObject );
},
domManip: function( args, table, callback ) {
if ( this[0] ) {
var fragment = (this[0].ownerDocument || this[0]).createDocumentFragment(),
scripts = jQuery.clean( args, (this[0].ownerDocument || this[0]), fragment ),
first = fragment.firstChild;
if ( first )
for ( var i = 0, l = this.length; i < l; i++ )
callback.call( root(this[i], first), this.length > 1 || i > 0 ?
fragment.cloneNode(true) : fragment );
if ( scripts )
jQuery.each( scripts, evalScript );
}
return this;
function root( elem, cur ) {
return table && jQuery.nodeName(elem, "table") && jQuery.nodeName(cur, "tr") ?
(elem.getElementsByTagName("tbody")[0] ||
elem.appendChild(elem.ownerDocument.createElement("tbody"))) :
elem;
}
}
};
// Give the init function the jQuery prototype for later instantiation
jQuery.fn.init.prototype = jQuery.fn;
function evalScript( i, elem ) {
if ( elem.src )
jQuery.ajax({
url: elem.src,
async: false,
dataType: "script"
});
else
jQuery.globalEval( elem.text || elem.textContent || elem.innerHTML || "" );
if ( elem.parentNode )
elem.parentNode.removeChild( elem );
}
function now(){
return +new Date;
}
jQuery.extend = jQuery.fn.extend = function() {
// copy reference to target object
var target = arguments[0] || {}, i = 1, length = arguments.length, deep = false, options;
// Handle a deep copy situation
if ( typeof target === "boolean" ) {
deep = target;
target = arguments[1] || {};
// skip the boolean and the target
i = 2;
}
// Handle case when target is a string or something (possible in deep copy)
if ( typeof target !== "object" && !jQuery.isFunction(target) )
target = {};
// extend jQuery itself if only one argument is passed
if ( length == i ) {
target = this;
--i;
}
for ( ; i < length; i++ )
// Only deal with non-null/undefined values
if ( (options = arguments[ i ]) != null )
// Extend the base object
for ( var name in options ) {
var src = target[ name ], copy = options[ name ];
// Prevent never-ending loop
if ( target === copy )
continue;
// Recurse if we're merging object values
if ( deep && copy && typeof copy === "object" && !copy.nodeType )
target[ name ] = jQuery.extend( deep,
// Never move original objects, clone them
src || ( copy.length != null ? [ ] : { } )
, copy );
// Don't bring in undefined values
else if ( copy !== undefined )
target[ name ] = copy;
}
// Return the modified object
return target;
};
// exclude the following css properties to add px
var exclude = /z-?index|font-?weight|opacity|zoom|line-?height/i,
// cache defaultView
defaultView = document.defaultView || {},
toString = Object.prototype.toString;
jQuery.extend({
noConflict: function( deep ) {
window.$ = _$;
if ( deep )
window.jQuery = _jQuery;
return jQuery;
},
// See test/unit/core.js for details concerning isFunction.
// Since version 1.3, DOM methods and functions like alert
// aren't supported. They return false on IE (#2968).
isFunction: function( obj ) {
return toString.call(obj) === "[object Function]";
},
isArray: function( obj ) {
return toString.call(obj) === "[object Array]";
},
// check if an element is in a (or is an) XML document
isXMLDoc: function( elem ) {
return elem.nodeType === 9 && elem.documentElement.nodeName !== "HTML" ||
!!elem.ownerDocument && jQuery.isXMLDoc( elem.ownerDocument );
},
// Evalulates a script in a global context
globalEval: function( data ) {
if ( data && /\S/.test(data) ) {
// Inspired by code by Andrea Giammarchi
// http://webreflection.blogspot.com/2007/08/global-scope-evaluation-and-dom.html
var head = document.getElementsByTagName("head")[0] || document.documentElement,
script = document.createElement("script");
script.type = "text/javascript";
if ( jQuery.support.scriptEval )
script.appendChild( document.createTextNode( data ) );
else
script.text = data;
// Use insertBefore instead of appendChild to circumvent an IE6 bug.
// This arises when a base node is used (#2709).
head.insertBefore( script, head.firstChild );
head.removeChild( script );
}
},
nodeName: function( elem, name ) {
return elem.nodeName && elem.nodeName.toUpperCase() == name.toUpperCase();
},
// args is for internal usage only
each: function( object, callback, args ) {
var name, i = 0, length = object.length;
if ( args ) {
if ( length === undefined ) {
for ( name in object )
if ( callback.apply( object[ name ], args ) === false )
break;
} else
for ( ; i < length; )
if ( callback.apply( object[ i++ ], args ) === false )
break;
// A special, fast, case for the most common use of each
} else {
if ( length === undefined ) {
for ( name in object )
if ( callback.call( object[ name ], name, object[ name ] ) === false )
break;
} else
for ( var value = object[0];
i < length && callback.call( value, i, value ) !== false; value = object[++i] ){}
}
return object;
},
prop: function( elem, value, type, i, name ) {
// Handle executable functions
if ( jQuery.isFunction( value ) )
value = value.call( elem, i );
// Handle passing in a number to a CSS property
return typeof value === "number" && type == "curCSS" && !exclude.test( name ) ?
value + "px" :
value;
},
className: {
// internal only, use addClass("class")
add: function( elem, classNames ) {
jQuery.each((classNames || "").split(/\s+/), function(i, className){
if ( elem.nodeType == 1 && !jQuery.className.has( elem.className, className ) )
elem.className += (elem.className ? " " : "") + className;
});
},
// internal only, use removeClass("class")
remove: function( elem, classNames ) {
if (elem.nodeType == 1)
elem.className = classNames !== undefined ?
jQuery.grep(elem.className.split(/\s+/), function(className){
return !jQuery.className.has( classNames, className );
}).join(" ") :
"";
},
// internal only, use hasClass("class")
has: function( elem, className ) {
return elem && jQuery.inArray( className, (elem.className || elem).toString().split(/\s+/) ) > -1;
}
},
// A method for quickly swapping in/out CSS properties to get correct calculations
swap: function( elem, options, callback ) {
var old = {};
// Remember the old values, and insert the new ones
for ( var name in options ) {
old[ name ] = elem.style[ name ];
elem.style[ name ] = options[ name ];
}
callback.call( elem );
// Revert the old values
for ( var name in options )
elem.style[ name ] = old[ name ];
},
css: function( elem, name, force, extra ) {
if ( name == "width" || name == "height" ) {
var val, props = { position: "absolute", visibility: "hidden", display:"block" }, which = name == "width" ? [ "Left", "Right" ] : [ "Top", "Bottom" ];
function getWH() {
val = name == "width" ? elem.offsetWidth : elem.offsetHeight;
if ( extra === "border" )
return;
jQuery.each( which, function() {
if ( !extra )
val -= parseFloat(jQuery.curCSS( elem, "padding" + this, true)) || 0;
if ( extra === "margin" )
val += parseFloat(jQuery.curCSS( elem, "margin" + this, true)) || 0;
else
val -= parseFloat(jQuery.curCSS( elem, "border" + this + "Width", true)) || 0;
});
}
if ( elem.offsetWidth !== 0 )
getWH();
else
jQuery.swap( elem, props, getWH );
return Math.max(0, Math.round(val));
}
return jQuery.curCSS( elem, name, force );
},
curCSS: function( elem, name, force ) {
var ret, style = elem.style;
// We need to handle opacity special in IE
if ( name == "opacity" && !jQuery.support.opacity ) {
ret = jQuery.attr( style, "opacity" );
return ret == "" ?
"1" :
ret;
}
// Make sure we're using the right name for getting the float value
if ( name.match( /float/i ) )
name = styleFloat;
if ( !force && style && style[ name ] )
ret = style[ name ];
else if ( defaultView.getComputedStyle ) {
// Only "float" is needed here
if ( name.match( /float/i ) )
name = "float";
name = name.replace( /([A-Z])/g, "-$1" ).toLowerCase();
var computedStyle = defaultView.getComputedStyle( elem, null );
if ( computedStyle )
ret = computedStyle.getPropertyValue( name );
// We should always get a number back from opacity
if ( name == "opacity" && ret == "" )
ret = "1";
} else if ( elem.currentStyle ) {
var camelCase = name.replace(/\-(\w)/g, function(all, letter){
return letter.toUpperCase();
});
ret = elem.currentStyle[ name ] || elem.currentStyle[ camelCase ];
// From the awesome hack by Dean Edwards
// http://erik.eae.net/archives/2007/07/27/18.54.15/#comment-102291
// If we're not dealing with a regular pixel number
// but a number that has a weird ending, we need to convert it to pixels
if ( !/^\d+(px)?$/i.test( ret ) && /^\d/.test( ret ) ) {
// Remember the original values
var left = style.left, rsLeft = elem.runtimeStyle.left;
// Put in the new values to get a computed value out
elem.runtimeStyle.left = elem.currentStyle.left;
style.left = ret || 0;
ret = style.pixelLeft + "px";
// Revert the changed values
style.left = left;
elem.runtimeStyle.left = rsLeft;
}
}
return ret;
},
clean: function( elems, context, fragment ) {
context = context || document;
// !context.createElement fails in IE with an error but returns typeof 'object'
if ( typeof context.createElement === "undefined" )
context = context.ownerDocument || context[0] && context[0].ownerDocument || document;
// If a single string is passed in and it's a single tag
// just do a createElement and skip the rest
if ( !fragment && elems.length === 1 && typeof elems[0] === "string" ) {
var match = /^<(\w+)\s*\/?>$/.exec(elems[0]);
if ( match )
return [ context.createElement( match[1] ) ];
}
var ret = [], scripts = [], div = context.createElement("div");
jQuery.each(elems, function(i, elem){
if ( typeof elem === "number" )
elem += '';
if ( !elem )
return;
// Convert html string into DOM nodes
if ( typeof elem === "string" ) {
// Fix "XHTML"-style tags in all browsers
elem = elem.replace(/(<(\w+)[^>]*?)\/>/g, function(all, front, tag){
return tag.match(/^(abbr|br|col|img|input|link|meta|param|hr|area|embed)$/i) ?
all :
front + ">";
});
// Trim whitespace, otherwise indexOf won't work as expected
var tags = elem.replace(/^\s+/, "").substring(0, 10).toLowerCase();
var wrap =
// option or optgroup
!tags.indexOf("", "" ] ||
!tags.indexOf("", "" ] ||
tags.match(/^<(thead|tbody|tfoot|colg|cap)/) &&
[ 1, "
You are not allowed to view this page.
code-7c8d3bd0deb6/share/roundup/templates/devel/html/msg.index.html 0000644 0000000 0000000 00000001651 13620351020 023507 0 ustar 0000000 0000000 List of messages - <span tal:replace="config/TRACKER_NAME"
i18n:name="tracker"/>Message listing
code-7c8d3bd0deb6/share/roundup/templates/devel/html/query.item.html 0000644 0000000 0000000 00000001133 13620351020 023710 0 ustar 0000000 0000000
You can not view query
You can not view query.
You are not allowed to view
with id
code-7c8d3bd0deb6/share/roundup/templates/devel/html/query.js 0000644 0000000 0000000 00000001515 13620351020 022427 0 ustar 0000000 0000000 var action;
function display(data)
{
var list = $("div.list");
list.empty();
list.append(data);
}
// Run a query with a specific starting point and size
function query_start(start, size)
{
var inputs = $(":input");
var data = {}
if (start > 0) data['@startwith'] = start
if (size > -1) data['@pagesize'] = size
for (var i = 0; i < inputs.length; i++)
data[inputs[i].name] = inputs[i].value;
jQuery.get(action, data, display);
return false;
}
// Run a query, starting at the first element
function query()
{
return query_start(0, -1)
}
// Deactivate the form's submit action, and instead
// invoke the action as part of (inline) query.
function replace_submit()
{
var form = $("form");
action = form.attr("action");
form.attr("action",""); // reset
form.submit(query);
}
$(document).ready(replace_submit);
code-7c8d3bd0deb6/share/roundup/templates/devel/html/style.css 0000644 0000000 0000000 00000004250 13620351020 022575 0 ustar 0000000 0000000 /* layout*/
body
{
font-family: sans-serif, Arial, Helvetica;
background-color: white;
color: #333;
margin:0;
padding: 0 3em 0 13em;
}
body > .header { margin: 0 0 0 -13em;}
body > .footer { margin: 0 0 0 -13em; clear:both;}
body > .navigation
{
margin-left: -13em;
width: 13em;
float: left;
}
body > .content
{
width: 100%;
margin: 0;
}
body > .header > #searchbox { position: absolute; right: 1em; top: 1em;}
/* style */
.footer { padding: 1em;}
:link { color: #bb0000; text-decoration: none;}
:visited { color: #770000; text-decoration: none;}
.header h1 { margin-left: 1em; }
body
{
font-family: sans-serif, Arial, Helvetica;
background-color: #f5f5f5;
color: #333;
}
.menu { padding: 0; margin-right: 1em;}
.menu ul
{
padding: 0;
margin: 0;
}
.menu li
{
margin: 5pt 0;
}
.menu > ul > li > *
{
display: block;
padding: 2pt 2pt 2pt 10pt;
border: solid thin #dadada;
background-color:#ffffff;
}
.menu > ul > li.current > *
{
background-color:#dddddd;
}
.menu ul li:first-child { margin-top:0;}
.menu ul { list-style-type:none;}
/* sub-menus are indented */
.menu > ul > li > ul,
.menu > ul > li.current > ul
{
border: none;
background-color: inherit;
margin: 0;
}
.menu ul ul
{
margin-left: 2em;
font-size: smaller;
margin: 0 0 0 5pt;
}
/* sub-menu items draw a separator */
.menu ul ul > li
{
margin: 0;
padding: 0;
border: none;
border-top: solid thin #dadada;
background-color: inherit;
}
.menu ul ul > li:first-child
{
border-top: none;
}
.footer
{
font-size: small;
text-align: center;
color: lightgrey;
}
.content
{
padding: 1em;
border: solid thin #dadada;
background-color: #ffffff;
}
pre {
white-space: pre-wrap;
}
#search { text-align: right; }
p.ok-message
{
background-color: #eeffee;
border: 1px solid #009900;
padding: 5px;
color: #009900;
font-weight: bold;
}
p.error-message
{
background-color: #ffeeee;
border: 1px solid #990000;
padding: 5px;
color: #990000;
font-weight: bold;
}
table
{
border-collapse: collapse;
border-spacing: 1px;
width: 100%;
background-color: #fafafa;
}
tr.odd { background-color:#f5f5f5; }
input, textarea { border-width: 1px; }
code-7c8d3bd0deb6/share/roundup/templates/devel/html/task.index.html 0000644 0000000 0000000 00000017033 13620351020 023664 0 ustar 0000000 0000000
<span tal:omit-tag="true" i18n:translate="" >List of tasks</span>
<span tal:condition="request/dispname"
tal:replace="python:' - %s '%request.dispname"
/> - <span tal:replace="config/TRACKER_NAME" />
List of tasks
You have two options if you have forgotten your password.
If you know the email address you registered with, enter it below.
If your user was automatically created during
import from the old sourceforge tracker, your e-mail address is
<Sourceforge username>@users.sourceforge.net. The mail address
associated with your account can be changed after login.
A confirmation email will be sent to you -
please follow the instructions within it to complete the reset process.
g
code-7c8d3bd0deb6/share/roundup/templates/devel/html/user.help-search.html 0000644 0000000 0000000 00000005660 13620351020 024767 0 ustar 0000000 0000000
Search input for user helper
code-7c8d3bd0deb6/share/roundup/templates/devel/html/user.help.html 0000644 0000000 0000000 00000012417 13620351020 023522 0 ustar 0000000 0000000
code-7c8d3bd0deb6/share/roundup/templates/devel/html/user.register.html 0000644 0000000 0000000 00000006076 13620351020 024422 0 ustar 0000000 0000000 Registering with <span i18n:name="tracker"
tal:replace="db/config/TRACKER_NAME" />Registering with
NOTE: If you have previously created or modified issue
reports using the sourceforge issue tracker previously used for python
bugs, your username on sourceforge already exists in this tracker. Use
the Password recovery form to
get a password for your account.
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-7c8d3bd0deb6/share/roundup/templates/devel/html/user_utils.js 0000644 0000000 0000000 00000005700 13620351020 023460 0 ustar 0000000 0000000 // User Editing Utilities
/**
* for new users:
* Depending on the input field which calls it, takes the value
* and dispatches it to certain other input fields:
*
* address
* +-> username
* | `-> realname
* `-> organisation
*/
function split_name(that) {
var raw = that.value
var val = trim(raw)
if (val == '') {
return
}
var username=''
var realname=''
var address=''
switch (that.name) {
case 'address':
address=val
break
case 'username':
username=val
break
case 'realname':
realname=val
break
default:
alert('Ooops - unknown name field '+that.name+'!')
return
}
var the_form = that.form;
function field_empty(name) {
return the_form[name].value == ''
}
// no break statements - on purpose!
switch (that.name) {
case 'address':
var split1 = address.split('@')
if (field_empty('username')) {
username = split1[0]
the_form.username.value = username
}
if (field_empty('organisation')) {
the_form.organisation.value = default_organisation(split1[1])
}
case 'username':
if (field_empty('realname')) {
realname = Cap(username.split('.').join(' '))
the_form.realname.value = realname
}
case 'realname':
if (field_empty('username')) {
username = Cap(realname.replace(' ', '.'))
the_form.username.value = username
}
if (the_form.firstname && the_form.lastname) {
var split2 = realname.split(' ')
var firstname='', lastname=''
firstname = split2[0]
lastname = split2.slice(1).join(' ')
if (field_empty('firstname')) {
the_form.firstname.value = firstname
}
if (field_empty('lastname')) {
the_form.lastname.value = lastname
}
}
}
}
function SubCap(str) {
switch (str) {
case 'de': case 'do': case 'da':
case 'du': case 'von':
return str;
}
if (str.toLowerCase().slice(0,2) == 'mc') {
return 'Mc'+str.slice(2,3).toUpperCase()+str.slice(3).toLowerCase()
}
return str.slice(0,1).toUpperCase()+str.slice(1).toLowerCase()
}
function Cap(str) {
var liz = str.split(' ')
for (var i=0; i/db/files/]
# type = String() [MIME type of the content, default 'text/plain']
msg = FileClass(db, "msg",
author=Link("user", do_journal='no'),
recipients=Multilink("user", do_journal='no'),
date=Date(),
summary=String(),
files=Multilink("file"),
messageid=String(),
inreplyto=String(),
revision=Link("vcs_rev"))
# File
file = FileClass(db, "file",
name=String(),
description=String(indexme='yes'))
# Patch
patches = FileClass(db, "patches",
name=String(),
description=String(indexme='yes'),
repository=String(),
revision=String())
# Bug Type
bug_type = Class(db, 'bug_type',
name=String(),
description=String(),
order=Number())
bug_type.setkey('name')
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# patches = Multilink("patches")
# nosy = Multilink("user")
# superseder = Multilink("issue")
bug = IssueClass(db, "bug",
type=Link('bug_type'),
components=Multilink('component'),
versions=Multilink('version'),
severity=Link('severity'),
priority=Link('priority'),
dependencies=Multilink('bug'),
assignee=Link('user'),
status=Link('status'),
resolution=Link('resolution'),
superseder=Link('bug'),
keywords=Multilink('keyword'),
patches=Multilink('patches'))
# Task Type
task_type = Class(db, 'task_type',
name=String(),
description=String(),
order=Number())
task_type.setkey('name')
# IssueClass automatically gets these properties in addition to the Class ones:
# title = String()
# messages = Multilink("msg")
# files = Multilink("file")
# nosy = Multilink("user")
# superseder = Multilink("issue")
task = IssueClass(db, "task",
type=Link('task_type'),
components=Multilink('component'),
priority=Link('priority'),
dependencies=Multilink('task'),
assignee=Multilink('user'),
status=Link('status'),
resolution=Link('resolution'),
solves=Link('bug'))
milestone = IssueClass(db, "milestone",
bugs=Multilink("bug"),
tasks=Multilink("task"),
status=Link("status"),
release_date=String())
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
db.security.addRole(name='Developer', description='A developer')
db.security.addRole(name='Coordinator', description='A coordinator')
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, 'Web Access')
db.security.addPermissionToRole(r, 'Email Access')
db.security.addPermissionToRole(r, 'Rest Access')
db.security.addPermissionToRole(r, 'Xmlrpc Access')
##########################
# User permissions
##########################
for cl in ('severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug_type', 'bug', 'task_type', 'task', 'milestone',
'keyword', 'file', 'msg'):
db.security.addPermissionToRole('User', 'View', cl)
db.security.addPermissionToRole('Anonymous', 'View', cl)
for cl in ('severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug_type', 'bug', 'file', 'msg'):
db.security.addPermissionToRole('User', 'Create', cl)
def may_edit_file(db, userid, itemid):
return userid == db.file.get(itemid, "creator")
p = db.security.addPermission(name='Edit', klass='file', check=may_edit_file,
description="User is allowed to remove their own files")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='bug',
properties=('title', 'bug_type',
'components', 'versions',
'severity',
'messages', 'files', 'nosy'),
description='User can report and discuss bugs')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='bug',
properties=('title', 'bug_type',
'components', 'versions',
'severity',
'messages', 'files', 'nosy'),
description='User can report and discuss bugs')
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Create', klass='task',
properties=('title', 'task_type',
'components',
'messages', 'files', 'nosy'),
description='Developer can create and discuss tasks')
db.security.addPermissionToRole('Developer', p)
p = db.security.addPermission(name='Edit', klass='task',
properties=('title', 'task_type',
'components',
'messages', 'files', 'nosy'),
description='Developer can create and discuss tasks')
db.security.addPermissionToRole('Developer', p)
p = db.security.addPermission(name='Create', klass='milestone',
description='Coordinator can create and discuss milestones')
db.security.addPermissionToRole('Coordinator', p)
p = db.security.addPermission(name='Edit', klass='milestone',
description='Coordinator can create and discuss milestones')
db.security.addPermissionToRole('Coordinator', p)
##########################
# Developer permissions
##########################
for cl in ('bug_type', 'severity', 'component',
'version', 'priority', 'status', 'resolution',
'bug', 'file', 'msg', 'keyword'):
db.security.addPermissionToRole('Developer', 'View', cl)
for cl in ('bug', 'file', 'msg', 'keyword'):
db.security.addPermissionToRole('Developer', 'Edit', cl)
db.security.addPermissionToRole('Developer', 'Create', cl)
##########################
# Coordinator permissions
##########################
for cl in ('bug_type', 'task_type', 'severity', 'component',
'version', 'priority', 'status', 'resolution', 'bug', 'task', 'file', 'msg'):
db.security.addPermissionToRole('Coordinator', 'View', cl)
db.security.addPermissionToRole('Coordinator', 'Edit', cl)
db.security.addPermissionToRole('Coordinator', 'Create', cl)
# May users view other user information? Comment these lines out
# if you don't want them to
p = db.security.addPermission(name='View', klass='user',
properties=('id', 'organisation', 'phone', 'realname', 'timezone',
'vcs_name', 'username'))
db.security.addPermissionToRole('User', p)
db.security.addPermissionToRole('Developer', p)
# Coordinator may also edit users, so they may see everything:
db.security.addPermissionToRole('Coordinator', 'View', 'user')
# Allow Coordinator to edit any user, including their roles.
db.security.addPermissionToRole('Coordinator', 'Edit', 'user')
db.security.addPermissionToRole('Coordinator', 'Web Roles')
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
description="User is allowed to edit their own user details",
properties=('username', 'password',
'address', 'realname',
'phone', 'organisation',
'alternate_addresses',
'queries',
'timezone')) # Note: 'roles' excluded - users should not be able to edit their own roles.
for r in 'User', 'Developer':
db.security.addPermissionToRole(r, p)
# Users should be able to edit and view their own queries. They should also
# be able to view any marked as not private. They should not be able to
# edit others' queries, even if they're not private
def view_query(db, userid, itemid):
private_for = db.query.get(itemid, 'private_for')
if not private_for: return True
return userid == private_for
def edit_query(db, userid, itemid):
return userid == db.query.get(itemid, 'creator')
p = db.security.addPermission(name='View', klass='query', check=view_query,
description="User is allowed to view their own and public queries")
p = db.security.addPermission(name='Search', klass='query')
db.security.addPermissionToRole('User', p)
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Edit', klass='query', check=edit_query,
description="User is allowed to edit their queries")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
p = db.security.addPermission(name='Create', klass='query',
description="User is allowed to create queries")
for r in 'User', 'Developer', 'Coordinator':
db.security.addPermissionToRole(r, p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
# This is disabled by default to stop spam from auto-registering users on
# public trackers.
#db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's Anonymous
# Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Create', 'user')
# Allow anonymous users access to view issues (and the related, linked
# information).
for cl in 'bug', 'severity', 'status', 'resolution', 'msg', 'file':
db.security.addPermissionToRole('Anonymous', 'View', cl)
# Allow the anonymous user to use the "Show Unassigned" search.
# It acts like "Show Open" if this permission is not available.
# If you are running a tracker that does not allow read access for
# anonymous, you should remove this entry as it can be used to perform
# a username guessing attack against a roundup install.
p = db.security.addPermission(name='Search', klass='user')
db.security.addPermissionToRole ('Anonymous', p)
# [OPTIONAL]
# Allow anonymous users access to create or edit "issue" items (and the
# related file and message items)
#for cl in 'issue', 'file', 'msg':
# db.security.addPermissionToRole('Anonymous', 'Create', cl)
# db.security.addPermissionToRole('Anonymous', 'Edit', cl)
# vim: set filetype=python sts=4 sw=4 et si :
code-7c8d3bd0deb6/share/roundup/templates/jinja2/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000612 13620351020 022540 0 ustar 0000000 0000000 Name: jinja2
Description: This is a generic issue tracker based on classic schema.
It uses Jinja2 for templating and Twitter bootstrap for responsive
markup. You will need jinja and gettext for this to work.
See the wiki page http://www.roundup-tracker.org/cgi-bin/moin.cgi/Jinja2
for updates infos between releases.
Intended-For: Developers/Fearless first-time roundup users
code-7c8d3bd0deb6/share/roundup/templates/jinja2/config_ini.ini 0000644 0000000 0000000 00000000067 13620351020 022644 0 ustar 0000000 0000000 [main]
template_engine = jinja2
static_files = static
code-7c8d3bd0deb6/share/roundup/templates/jinja2/detectors/config.ini 0000644 0000000 0000000 00000001037 13620351020 023777 0 ustar 0000000 0000000 [statusauditor]
# Options for statusauditor.py
#
# Option: chatting_requires_two_users
# Assume an issue has a status of unread and was created by the
# demo user.
# If False, a new message on the issue sets status to chatting.
# If True, a new message sets the status to chatting only if the
# author of the new message is not demo. A message sent by demo
# keeps the issue status at unread. As a result a user can open
# a new message and add information without setting the status
# to chatting.
chatting_requires_two_users = False
code-7c8d3bd0deb6/share/roundup/templates/jinja2/detectors/messagesummary.py 0000644 0000000 0000000 00000000752 13620351020 025450 0 ustar 0000000 0000000 from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if 'summary' in newvalues or 'content' not in newvalues:
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/jinja2/detectors/nosyreaction.py 0000644 0000000 0000000 00000012467 13620351020 025131 0 ustar 0000000 0000000 #
# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/)
# This module is free software, and you may redistribute it and/or modify
# under the same terms as Python, so long as this copyright message and
# disclaimer are retained in their original form.
#
# IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR
# DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING
# OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
# BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS"
# BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE,
# SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
#
from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError as message:
raise roundupdb.DetectorError(message)
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif 'messages' in oldvalues:
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if msgid not in m:
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if 'nosy' not in newvalues:
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if 'nosy' in newvalues:
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if 'assignedto' in newvalues and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if 'messages' in newvalues:
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.issue.react('create', nosyreaction)
db.issue.react('set', nosyreaction)
db.issue.audit('create', updatenosy)
db.issue.audit('set', updatenosy)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/jinja2/detectors/statusauditor.py 0000644 0000000 0000000 00000011141 13620351020 025313 0 ustar 0000000 0000000 # Copyright (c) 2002 ekit.com Inc (http://www.ekit-inc.com/)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
from roundup.configuration import BooleanOption, InvalidOptionError
def chatty(db, cl, nodeid, newvalues):
''' If the issue is currently 'resolved', 'done-cbb' or None,
then set it to 'chatting'. If issue is 'unread' and
chatting_requires_two_users is true, set state
to 'chatting' if the person adding the new message is not
the same as the person who created the issue. This allows
somebody to submit multiple emails describing the problem
without changing it to 'chatting'. 'chatting' should
indicate at least two people are 'chatting'.
'''
# If set to true, change state from 'unread' to 'chatting' only
# if the author of the update is not the person who created the
# first message (and thus the issue). If false (default ini file
# setting) set 'chatting' when the second message is received.
try:
chatting_requires_two_users = BooleanOption(None,
"detector::Statusauditor",
"CHATTING_REQUIRES_TWO_USERS").str2value(
db.config.detectors[
'STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS' ]
)
except InvalidOptionError:
raise InvalidOptionError("Option STATUSAUDITOR_CHATTING_REQUIRES_TWO_USERS not found in detectors/config.ini. Contact tracker admin to fix.")
# don't fire if there's no new message (ie. chat)
if 'messages' not in newvalues:
return
if newvalues['messages'] == cl.get(nodeid, 'messages'):
return
# get the chatting state ID
try:
chatting_id = db.status.lookup('chatting')
except KeyError:
# no chatting state, ignore all this stuff
return
# get the current value
current_status = cl.get(nodeid, 'status')
# see if there's an explicit change in this transaction
if 'status' in newvalues:
# yep, skip
return
# determine the id of 'unread', 'resolved' and 'chatting'
fromstates = []
for state in 'unread resolved done-cbb'.split():
try:
fromstates.append(db.status.lookup(state))
except KeyError:
pass
unread = fromstates[0] # grab the 'unread' state which is first
# ok, there's no explicit change, so check if we are in a state that
# should be changed. First see if we should set 'chatting' based on
# who opened the issue.
if current_status == unread and chatting_requires_two_users:
# find creator of issue and compare to currentuser making
# update. If the creator is same as initial author don't
# change to 'chatting'.
issue_creator = cl.get(nodeid, 'creator')
if issue_creator == db.getuid():
# person is chatting with themselves, don't set 'chatting'
return
# Current author is not the initiator of the issue so
# we are 'chatting'.
if current_status in fromstates + [None]:
# yep, we're now chatting
newvalues['status'] = chatting_id
def presetunread(db, cl, nodeid, newvalues):
''' Make sure the status is set on new issues
'''
if 'status' in newvalues and newvalues['status']:
return
# get the unread state ID
try:
unread_id = db.status.lookup('unread')
except KeyError:
# no unread state, ignore all this stuff
return
# ok, do it
newvalues['status'] = unread_id
def init(db):
# fire before changes are made
db.issue.audit('set', chatty)
db.issue.audit('create', presetunread)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/jinja2/detectors/userauditor.py 0000644 0000000 0000000 00000010477 13620351020 024761 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
valid_username = re.compile('^[a-z0-9_@!%.+-]+$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if 'address' in user:
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
- username matches A-z0-9_-.@!+% (email symbols)
'''
if 'username' in newvalues:
if not valid_username.match(newvalues['username']):
raise ValueError("Username/Login Name must consist only of the letters a-z (any case), digits 0-9 and the symbols: @._-!+%")
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError('Email address syntax is invalid "%s"'%address)
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError('Email address %s already in use' % address)
newroles = newvalues.get('roles')
if newroles:
for rolename in [r.lower().strip() for r in newroles.split(',')]:
if rolename and rolename not in db.security.role:
raise ValueError('Role "%s" does not exist'%rolename)
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError('Timezone "%s" does not exist' % tz)
except ValueError:
raise ValueError('Timezone "%s" exceeds valid range [-23...23]' % tz)
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/jinja2/html/_generic.404.html 0000644 0000000 0000000 00000000572 13620351020 023753 0 ustar 0000000 0000000 {% extends 'layout/page.html' %}
{% block head_title %}
404 - {% trans %}page not found{% endtrans %}
{% endblock %}
{% block page_content %}
{% trans %}404 - page not found{% endtrans %}
{% trans %}What were you looking for anyways?{% endtrans %}
{% trans %}There has been a collision.
Another user updated this node
while you were editing. Please{% endtrans %}
{% trans %}reload{% endtrans %}
{% trans %}the node and review your edits.{% endtrans %}
{% trans %}
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
{% endtrans %}
{% trans %}
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
{% endtrans %}
{% trans %}
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column. If you wish to restore a
removed item and you know its id then just put that id in the id column.
{% endtrans %}
{% for issue in batch %}
{% if request.group|length %}
{% set group = [request.group[0][1], request.group[1][1]] if request.group|length >= 2 else [request.group[0][1]] %}
{% if batch.propchanged(*group) %}
{%- for g in group -%}
{%- if issue[g] %} {% if g == 'id' %}{{ issue[g] }}{% else %}{{ issue[g].plain()|u }}{% endif %} {% else %} (no {{ g }} set) {% endif -%}
{%- endfor -%}
{% endif %}
{% endif %}
{% endblock %}
code-7c8d3bd0deb6/share/roundup/templates/jinja2/html/issue.item.edit.html 0000644 0000000 0000000 00000002411 13620351020 024675 0 ustar 0000000 0000000 {% import 'layout/edit.tmpl' as edit with context %}
code-7c8d3bd0deb6/share/roundup/templates/jinja2/html/issue.item.html 0000644 0000000 0000000 00000004441 13620351020 023756 0 ustar 0000000 0000000 {% extends 'layout/page.html' %}
{% block head_title %}
{% if context.id %}
Issue {{ context.id }}: {{ context.title.plain()|u }} - {{ config.TRACKER_NAME }}
{% else %}
New Issue - {{ config.TRACKER_NAME }}
{% endif %}
{% endblock %}
{% block page_header %}
{% if not (context.id or context.is_edit_ok()) %}
New Issue
{% elif not context.id and context.is_edit_ok() %}
New Issue Editing
{% else %}
Issue {{ context.id }}
{% endif %}
{% endblock %}
{% block content %}
{% include 'layout/permission.html' %}
{% if context.is_view_ok() %}
{% if context.is_edit_ok() %}
{% include 'issue.item.edit.html' %}
{% else %}
{% include 'issue.item.readonly.html' %}
{% endif %}
{% endif %}
{% if context.id %}
Created on {{ context.creation.plain()|u }}
by {{ context.creator.plain()|u }},
last changed {{ context.activity.reldate()|u }}
by {{ context.actor.plain()|u }}.
{% endif %}
{% if context.files %}
{% include 'file.index.html' %}
{% endif %}
{% if context.messages %}
{% trans %}You will shortly receive an email to confirm your
registration. To complete the registration process,
visit the link indicated in the email.{% endtrans %}
").append(st.parseHTML(e)).find(i):e)}).complete(r&&function(e,t){s.each(r,a||[e.responseText,t,e])}),this},st.each(["ajaxStart","ajaxStop","ajaxComplete","ajaxError","ajaxSuccess","ajaxSend"],function(e,t){st.fn[t]=function(e){return this.on(t,e)}}),st.each(["get","post"],function(e,n){st[n]=function(e,r,i,o){return st.isFunction(r)&&(o=o||i,i=r,r=t),st.ajax({url:e,type:n,dataType:o,data:r,success:i})}}),st.extend({active:0,lastModified:{},etag:{},ajaxSettings:{url:Dn,type:"GET",isLocal:Fn.test(jn[1]),global:!0,processData:!0,async:!0,contentType:"application/x-www-form-urlencoded; charset=UTF-8",accepts:{"*":In,text:"text/plain",html:"text/html",xml:"application/xml, text/xml",json:"application/json, text/javascript"},contents:{xml:/xml/,html:/html/,json:/json/},responseFields:{xml:"responseXML",text:"responseText"},converters:{"* text":e.String,"text html":!0,"text json":st.parseJSON,"text xml":st.parseXML},flatOptions:{url:!0,context:!0}},ajaxSetup:function(e,t){return t?H(H(e,st.ajaxSettings),t):H(st.ajaxSettings,e)},ajaxPrefilter:D(Wn),ajaxTransport:D($n),ajax:function(e,n){function r(e,n,r,s){var l,f,v,b,T,N=n;2!==x&&(x=2,u&&clearTimeout(u),i=t,a=s||"",w.readyState=e>0?4:0,r&&(b=M(p,w,r)),e>=200&&300>e||304===e?(p.ifModified&&(T=w.getResponseHeader("Last-Modified"),T&&(st.lastModified[o]=T),T=w.getResponseHeader("etag"),T&&(st.etag[o]=T)),304===e?(l=!0,N="notmodified"):(l=q(p,b),N=l.state,f=l.data,v=l.error,l=!v)):(v=N,(e||!N)&&(N="error",0>e&&(e=0))),w.status=e,w.statusText=(n||N)+"",l?g.resolveWith(d,[f,N,w]):g.rejectWith(d,[w,N,v]),w.statusCode(y),y=t,c&&h.trigger(l?"ajaxSuccess":"ajaxError",[w,p,l?f:v]),m.fireWith(d,[w,N]),c&&(h.trigger("ajaxComplete",[w,p]),--st.active||st.event.trigger("ajaxStop")))}"object"==typeof e&&(n=e,e=t),n=n||{};var i,o,a,s,u,l,c,f,p=st.ajaxSetup({},n),d=p.context||p,h=p.context&&(d.nodeType||d.jquery)?st(d):st.event,g=st.Deferred(),m=st.Callbacks("once memory"),y=p.statusCode||{},v={},b={},x=0,T="canceled",w={readyState:0,getResponseHeader:function(e){var t;if(2===x){if(!s)for(s={};t=_n.exec(a);)s[t[1].toLowerCase()]=t[2];t=s[e.toLowerCase()]}return null==t?null:t},getAllResponseHeaders:function(){return 2===x?a:null},setRequestHeader:function(e,t){var n=e.toLowerCase();return x||(e=b[n]=b[n]||e,v[e]=t),this},overrideMimeType:function(e){return x||(p.mimeType=e),this},statusCode:function(e){var t;if(e)if(2>x)for(t in e)y[t]=[y[t],e[t]];else w.always(e[w.status]);return this},abort:function(e){var t=e||T;return i&&i.abort(t),r(0,t),this}};if(g.promise(w).complete=m.add,w.success=w.done,w.error=w.fail,p.url=((e||p.url||Dn)+"").replace(Mn,"").replace(Bn,jn[1]+"//"),p.type=n.method||n.type||p.method||p.type,p.dataTypes=st.trim(p.dataType||"*").toLowerCase().match(lt)||[""],null==p.crossDomain&&(l=Pn.exec(p.url.toLowerCase()),p.crossDomain=!(!l||l[1]===jn[1]&&l[2]===jn[2]&&(l[3]||("http:"===l[1]?80:443))==(jn[3]||("http:"===jn[1]?80:443)))),p.data&&p.processData&&"string"!=typeof p.data&&(p.data=st.param(p.data,p.traditional)),L(Wn,p,n,w),2===x)return w;c=p.global,c&&0===st.active++&&st.event.trigger("ajaxStart"),p.type=p.type.toUpperCase(),p.hasContent=!On.test(p.type),o=p.url,p.hasContent||(p.data&&(o=p.url+=(Hn.test(o)?"&":"?")+p.data,delete p.data),p.cache===!1&&(p.url=qn.test(o)?o.replace(qn,"$1_="+Ln++):o+(Hn.test(o)?"&":"?")+"_="+Ln++)),p.ifModified&&(st.lastModified[o]&&w.setRequestHeader("If-Modified-Since",st.lastModified[o]),st.etag[o]&&w.setRequestHeader("If-None-Match",st.etag[o])),(p.data&&p.hasContent&&p.contentType!==!1||n.contentType)&&w.setRequestHeader("Content-Type",p.contentType),w.setRequestHeader("Accept",p.dataTypes[0]&&p.accepts[p.dataTypes[0]]?p.accepts[p.dataTypes[0]]+("*"!==p.dataTypes[0]?", "+In+"; q=0.01":""):p.accepts["*"]);for(f in p.headers)w.setRequestHeader(f,p.headers[f]);if(p.beforeSend&&(p.beforeSend.call(d,w,p)===!1||2===x))return w.abort();T="abort";for(f in{success:1,error:1,complete:1})w[f](p[f]);if(i=L($n,p,n,w)){w.readyState=1,c&&h.trigger("ajaxSend",[w,p]),p.async&&p.timeout>0&&(u=setTimeout(function(){w.abort("timeout")},p.timeout));try{x=1,i.send(v,r)}catch(N){if(!(2>x))throw N;r(-1,N)}}else r(-1,"No Transport");return w},getScript:function(e,n){return st.get(e,t,n,"script")},getJSON:function(e,t,n){return st.get(e,t,n,"json")}}),st.ajaxSetup({accepts:{script:"text/javascript, application/javascript, application/ecmascript, application/x-ecmascript"},contents:{script:/(?:java|ecma)script/},converters:{"text script":function(e){return st.globalEval(e),e}}}),st.ajaxPrefilter("script",function(e){e.cache===t&&(e.cache=!1),e.crossDomain&&(e.type="GET",e.global=!1)}),st.ajaxTransport("script",function(e){if(e.crossDomain){var n,r=V.head||st("head")[0]||V.documentElement;return{send:function(t,i){n=V.createElement("script"),n.async=!0,e.scriptCharset&&(n.charset=e.scriptCharset),n.src=e.url,n.onload=n.onreadystatechange=function(e,t){(t||!n.readyState||/loaded|complete/.test(n.readyState))&&(n.onload=n.onreadystatechange=null,n.parentNode&&n.parentNode.removeChild(n),n=null,t||i(200,"success"))},r.insertBefore(n,r.firstChild)},abort:function(){n&&n.onload(t,!0)}}}});var Xn=[],Un=/(=)\?(?=&|$)|\?\?/;st.ajaxSetup({jsonp:"callback",jsonpCallback:function(){var e=Xn.pop()||st.expando+"_"+Ln++;return this[e]=!0,e}}),st.ajaxPrefilter("json jsonp",function(n,r,i){var o,a,s,u=n.jsonp!==!1&&(Un.test(n.url)?"url":"string"==typeof n.data&&!(n.contentType||"").indexOf("application/x-www-form-urlencoded")&&Un.test(n.data)&&"data");return u||"jsonp"===n.dataTypes[0]?(o=n.jsonpCallback=st.isFunction(n.jsonpCallback)?n.jsonpCallback():n.jsonpCallback,u?n[u]=n[u].replace(Un,"$1"+o):n.jsonp!==!1&&(n.url+=(Hn.test(n.url)?"&":"?")+n.jsonp+"="+o),n.converters["script json"]=function(){return s||st.error(o+" was not called"),s[0]},n.dataTypes[0]="json",a=e[o],e[o]=function(){s=arguments},i.always(function(){e[o]=a,n[o]&&(n.jsonpCallback=r.jsonpCallback,Xn.push(o)),s&&st.isFunction(a)&&a(s[0]),s=a=t}),"script"):t});var Vn,Yn,Jn=0,Gn=e.ActiveXObject&&function(){var e;for(e in Vn)Vn[e](t,!0)};st.ajaxSettings.xhr=e.ActiveXObject?function(){return!this.isLocal&&_()||F()}:_,Yn=st.ajaxSettings.xhr(),st.support.cors=!!Yn&&"withCredentials"in Yn,Yn=st.support.ajax=!!Yn,Yn&&st.ajaxTransport(function(n){if(!n.crossDomain||st.support.cors){var r;return{send:function(i,o){var a,s,u=n.xhr();if(n.username?u.open(n.type,n.url,n.async,n.username,n.password):u.open(n.type,n.url,n.async),n.xhrFields)for(s in n.xhrFields)u[s]=n.xhrFields[s];n.mimeType&&u.overrideMimeType&&u.overrideMimeType(n.mimeType),n.crossDomain||i["X-Requested-With"]||(i["X-Requested-With"]="XMLHttpRequest");try{for(s in i)u.setRequestHeader(s,i[s])}catch(l){}u.send(n.hasContent&&n.data||null),r=function(e,i){var s,l,c,f,p;try{if(r&&(i||4===u.readyState))if(r=t,a&&(u.onreadystatechange=st.noop,Gn&&delete Vn[a]),i)4!==u.readyState&&u.abort();else{f={},s=u.status,p=u.responseXML,c=u.getAllResponseHeaders(),p&&p.documentElement&&(f.xml=p),"string"==typeof u.responseText&&(f.text=u.responseText);try{l=u.statusText}catch(d){l=""}s||!n.isLocal||n.crossDomain?1223===s&&(s=204):s=f.text?200:404}}catch(h){i||o(-1,h)}f&&o(s,l,f,c)},n.async?4===u.readyState?setTimeout(r):(a=++Jn,Gn&&(Vn||(Vn={},st(e).unload(Gn)),Vn[a]=r),u.onreadystatechange=r):r()},abort:function(){r&&r(t,!0)}}}});var Qn,Kn,Zn=/^(?:toggle|show|hide)$/,er=RegExp("^(?:([+-])=|)("+ut+")([a-z%]*)$","i"),tr=/queueHooks$/,nr=[W],rr={"*":[function(e,t){var n,r,i=this.createTween(e,t),o=er.exec(t),a=i.cur(),s=+a||0,u=1,l=20;if(o){if(n=+o[2],r=o[3]||(st.cssNumber[e]?"":"px"),"px"!==r&&s){s=st.css(i.elem,e,!0)||n||1;do u=u||".5",s/=u,st.style(i.elem,e,s+r);while(u!==(u=i.cur()/a)&&1!==u&&--l)}i.unit=r,i.start=s,i.end=o[1]?s+(o[1]+1)*n:n}return i}]};st.Animation=st.extend(P,{tweener:function(e,t){st.isFunction(e)?(t=e,e=["*"]):e=e.split(" ");for(var n,r=0,i=e.length;i>r;r++)n=e[r],rr[n]=rr[n]||[],rr[n].unshift(t)},prefilter:function(e,t){t?nr.unshift(e):nr.push(e)}}),st.Tween=$,$.prototype={constructor:$,init:function(e,t,n,r,i,o){this.elem=e,this.prop=n,this.easing=i||"swing",this.options=t,this.start=this.now=this.cur(),this.end=r,this.unit=o||(st.cssNumber[n]?"":"px")},cur:function(){var e=$.propHooks[this.prop];return e&&e.get?e.get(this):$.propHooks._default.get(this)},run:function(e){var t,n=$.propHooks[this.prop];return this.pos=t=this.options.duration?st.easing[this.easing](e,this.options.duration*e,0,1,this.options.duration):e,this.now=(this.end-this.start)*t+this.start,this.options.step&&this.options.step.call(this.elem,this.now,this),n&&n.set?n.set(this):$.propHooks._default.set(this),this}},$.prototype.init.prototype=$.prototype,$.propHooks={_default:{get:function(e){var t;return null==e.elem[e.prop]||e.elem.style&&null!=e.elem.style[e.prop]?(t=st.css(e.elem,e.prop,"auto"),t&&"auto"!==t?t:0):e.elem[e.prop]},set:function(e){st.fx.step[e.prop]?st.fx.step[e.prop](e):e.elem.style&&(null!=e.elem.style[st.cssProps[e.prop]]||st.cssHooks[e.prop])?st.style(e.elem,e.prop,e.now+e.unit):e.elem[e.prop]=e.now}}},$.propHooks.scrollTop=$.propHooks.scrollLeft={set:function(e){e.elem.nodeType&&e.elem.parentNode&&(e.elem[e.prop]=e.now)}},st.each(["toggle","show","hide"],function(e,t){var n=st.fn[t];st.fn[t]=function(e,r,i){return null==e||"boolean"==typeof e?n.apply(this,arguments):this.animate(I(t,!0),e,r,i)}}),st.fn.extend({fadeTo:function(e,t,n,r){return this.filter(w).css("opacity",0).show().end().animate({opacity:t},e,n,r)},animate:function(e,t,n,r){var i=st.isEmptyObject(e),o=st.speed(t,n,r),a=function(){var t=P(this,st.extend({},e),o);a.finish=function(){t.stop(!0)},(i||st._data(this,"finish"))&&t.stop(!0)};return a.finish=a,i||o.queue===!1?this.each(a):this.queue(o.queue,a)},stop:function(e,n,r){var i=function(e){var t=e.stop;delete e.stop,t(r)};return"string"!=typeof e&&(r=n,n=e,e=t),n&&e!==!1&&this.queue(e||"fx",[]),this.each(function(){var t=!0,n=null!=e&&e+"queueHooks",o=st.timers,a=st._data(this);if(n)a[n]&&a[n].stop&&i(a[n]);else for(n in a)a[n]&&a[n].stop&&tr.test(n)&&i(a[n]);for(n=o.length;n--;)o[n].elem!==this||null!=e&&o[n].queue!==e||(o[n].anim.stop(r),t=!1,o.splice(n,1));(t||!r)&&st.dequeue(this,e)})},finish:function(e){return e!==!1&&(e=e||"fx"),this.each(function(){var t,n=st._data(this),r=n[e+"queue"],i=n[e+"queueHooks"],o=st.timers,a=r?r.length:0;for(n.finish=!0,st.queue(this,e,[]),i&&i.cur&&i.cur.finish&&i.cur.finish.call(this),t=o.length;t--;)o[t].elem===this&&o[t].queue===e&&(o[t].anim.stop(!0),o.splice(t,1));for(t=0;a>t;t++)r[t]&&r[t].finish&&r[t].finish.call(this);delete n.finish})}}),st.each({slideDown:I("show"),slideUp:I("hide"),slideToggle:I("toggle"),fadeIn:{opacity:"show"},fadeOut:{opacity:"hide"},fadeToggle:{opacity:"toggle"}},function(e,t){st.fn[e]=function(e,n,r){return this.animate(t,e,n,r)}}),st.speed=function(e,t,n){var r=e&&"object"==typeof e?st.extend({},e):{complete:n||!n&&t||st.isFunction(e)&&e,duration:e,easing:n&&t||t&&!st.isFunction(t)&&t};return r.duration=st.fx.off?0:"number"==typeof r.duration?r.duration:r.duration in st.fx.speeds?st.fx.speeds[r.duration]:st.fx.speeds._default,(null==r.queue||r.queue===!0)&&(r.queue="fx"),r.old=r.complete,r.complete=function(){st.isFunction(r.old)&&r.old.call(this),r.queue&&st.dequeue(this,r.queue)},r},st.easing={linear:function(e){return e},swing:function(e){return.5-Math.cos(e*Math.PI)/2}},st.timers=[],st.fx=$.prototype.init,st.fx.tick=function(){var e,n=st.timers,r=0;for(Qn=st.now();n.length>r;r++)e=n[r],e()||n[r]!==e||n.splice(r--,1);n.length||st.fx.stop(),Qn=t},st.fx.timer=function(e){e()&&st.timers.push(e)&&st.fx.start()},st.fx.interval=13,st.fx.start=function(){Kn||(Kn=setInterval(st.fx.tick,st.fx.interval))},st.fx.stop=function(){clearInterval(Kn),Kn=null},st.fx.speeds={slow:600,fast:200,_default:400},st.fx.step={},st.expr&&st.expr.filters&&(st.expr.filters.animated=function(e){return st.grep(st.timers,function(t){return e===t.elem}).length}),st.fn.offset=function(e){if(arguments.length)return e===t?this:this.each(function(t){st.offset.setOffset(this,e,t)});var n,r,i={top:0,left:0},o=this[0],a=o&&o.ownerDocument;if(a)return n=a.documentElement,st.contains(n,o)?(o.getBoundingClientRect!==t&&(i=o.getBoundingClientRect()),r=z(a),{top:i.top+(r.pageYOffset||n.scrollTop)-(n.clientTop||0),left:i.left+(r.pageXOffset||n.scrollLeft)-(n.clientLeft||0)}):i},st.offset={setOffset:function(e,t,n){var r=st.css(e,"position");"static"===r&&(e.style.position="relative");var i,o,a=st(e),s=a.offset(),u=st.css(e,"top"),l=st.css(e,"left"),c=("absolute"===r||"fixed"===r)&&st.inArray("auto",[u,l])>-1,f={},p={};c?(p=a.position(),i=p.top,o=p.left):(i=parseFloat(u)||0,o=parseFloat(l)||0),st.isFunction(t)&&(t=t.call(e,n,s)),null!=t.top&&(f.top=t.top-s.top+i),null!=t.left&&(f.left=t.left-s.left+o),"using"in t?t.using.call(e,f):a.css(f)}},st.fn.extend({position:function(){if(this[0]){var e,t,n={top:0,left:0},r=this[0];return"fixed"===st.css(r,"position")?t=r.getBoundingClientRect():(e=this.offsetParent(),t=this.offset(),st.nodeName(e[0],"html")||(n=e.offset()),n.top+=st.css(e[0],"borderTopWidth",!0),n.left+=st.css(e[0],"borderLeftWidth",!0)),{top:t.top-n.top-st.css(r,"marginTop",!0),left:t.left-n.left-st.css(r,"marginLeft",!0)}}},offsetParent:function(){return this.map(function(){for(var e=this.offsetParent||V.documentElement;e&&!st.nodeName(e,"html")&&"static"===st.css(e,"position");)e=e.offsetParent;return e||V.documentElement})}}),st.each({scrollLeft:"pageXOffset",scrollTop:"pageYOffset"},function(e,n){var r=/Y/.test(n);st.fn[e]=function(i){return st.access(this,function(e,i,o){var a=z(e);return o===t?a?n in a?a[n]:a.document.documentElement[i]:e[i]:(a?a.scrollTo(r?st(a).scrollLeft():o,r?o:st(a).scrollTop()):e[i]=o,t)},e,i,arguments.length,null)}}),st.each({Height:"height",Width:"width"},function(e,n){st.each({padding:"inner"+e,content:n,"":"outer"+e},function(r,i){st.fn[i]=function(i,o){var a=arguments.length&&(r||"boolean"!=typeof i),s=r||(i===!0||o===!0?"margin":"border");return st.access(this,function(n,r,i){var o;return st.isWindow(n)?n.document.documentElement["client"+e]:9===n.nodeType?(o=n.documentElement,Math.max(n.body["scroll"+e],o["scroll"+e],n.body["offset"+e],o["offset"+e],o["client"+e])):i===t?st.css(n,r,s):st.style(n,r,i,s)},n,a?i:t,a,null)}})}),e.jQuery=e.$=st,"function"==typeof define&&define.amd&&define.amd.jQuery&&define("jquery",[],function(){return st})})(window);
//@ sourceMappingURL=jquery.min.map code-7c8d3bd0deb6/share/roundup/templates/jinja2/static/style.css 0000644 0000000 0000000 00000002054 13620351020 023176 0 ustar 0000000 0000000 body {
color: #333;
}
h1,
h2 {
font-weight: normal;
margin: 10px 0 20px 0;
text-transform: uppercase;
}
h1 {
text-align: center;
font-size: 24px;
letter-spacing: 2px;
line-height: 24px;
}
.navbar-light {
border-radius: 4px;
border: 1px solid #d4d4d4;
background-image: linear-gradient(to bottom,#ffffff,#e8e8e8);
background-repeat: repeat-x;
margin: 20px 15px;
padding: .3rem 1rem;
}
.navbar-light form {
margin: 8px;
}
.navbar-light .btn {
margin-top: 0;
}
tr.info {
background-color: #d9edf7;
}
pre {
background-color: #f0f0f0;
border: 1pt solid gray;
padding: 6pt;
}
footer {
font-size: 1.2em;
}
.vspace-one { margin-top: 1em; }
.vspace-two { margin-top: 2em; }
.vspace-three { margin-top: 3em; }
.vspace-four { margin-top: 4em; }
.vspace-five { margin-top: 5em; }
.navigation {
border-right: 1px solid #ddd;
}
.table-condensed td, .table-condensed th {
padding:.3rem;
}
input:required {
border-width: 1.5px;
border-color: #6e747a;
}
select:required {
border-width: 1.5px;
border-color: #6e747a;
}
code-7c8d3bd0deb6/share/roundup/templates/minimal/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000710 13620351020 023010 0 ustar 0000000 0000000 Name: minimal
Description: This is an empty tracker - it must be customised for it to be
useful! It only defines the bare minimum of information - the
user database and the two default users (admin and anonymous).
The rest is entirely up to you! Not recommended for first-time
Roundup users (it's easier to tweak the Classic tracker).
Intended-For: Roundup experts who need a clean slate to start with.
code-7c8d3bd0deb6/share/roundup/templates/minimal/detectors/userauditor.py 0000644 0000000 0000000 00000010477 13620351020 025232 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
valid_username = re.compile('^[a-z0-9_@!%.+-]+$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if 'address' in user:
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
- username matches A-z0-9_-.@!+% (email symbols)
'''
if 'username' in newvalues:
if not valid_username.match(newvalues['username']):
raise ValueError("Username/Login Name must consist only of the letters a-z (any case), digits 0-9 and the symbols: @._-!+%")
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError('Email address syntax is invalid "%s"'%address)
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError('Email address %s already in use' % address)
newroles = newvalues.get('roles')
if newroles:
for rolename in [r.lower().strip() for r in newroles.split(',')]:
if rolename and rolename not in db.security.role:
raise ValueError('Role "%s" does not exist'%rolename)
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError('Timezone "%s" does not exist' % tz)
except ValueError:
raise ValueError('Timezone "%s" exceeds valid range [-23...23]' % tz)
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/minimal/extensions/README.txt 0000644 0000000 0000000 00000000201 13620351020 024173 0 ustar 0000000 0000000 This directory is for tracker extensions:
- CGI Actions
- Templating functions
See the customisation doc for more information.
code-7c8d3bd0deb6/share/roundup/templates/minimal/html/_generic.404.html 0000644 0000000 0000000 00000000674 13620351020 024227 0 ustar 0000000 0000000
Item Not Found
Item Not Found
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column. If you wish to restore a
removed item and you know its id then just put that id in the id column.
Showing 10 items.
Show all history
(warning: this could be VERY long)
code-7c8d3bd0deb6/share/roundup/templates/minimal/html/help_controls.js 0000644 0000000 0000000 00000006037 13620351020 024470 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Keyword and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
for (box=0; box < document.frm_help.check.length; box++) {
if (document.frm_help.check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + document.frm_help.check[box].value;
}
}
return list;
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
code-7c8d3bd0deb6/share/roundup/templates/minimal/html/home.classlist.html 0000644 0000000 0000000 00000001404 13620351020 025066 0 ustar 0000000 0000000 List of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
You will shortly receive an email
to confirm your registration. To complete the registration process,
visit the link indicated in the email.
code-7c8d3bd0deb6/share/roundup/templates/minimal/initial_data.py 0000644 0000000 0000000 00000000626 13620351020 023305 0 ustar 0000000 0000000 #
# TRACKER DATABASE INITIALIZATION
#
# create the two default users
user = db.getclass('user')
user.create(username="admin", password=adminpw,
address=admin_email, roles='Admin')
user.create(username="anonymous", roles='Anonymous')
# add any additional database creation steps here - but only if you
# haven't initialised the database with the admin "initialise" command
# vim: set et sts=4 sw=4 :
code-7c8d3bd0deb6/share/roundup/templates/minimal/schema.py 0000644 0000000 0000000 00000005400 13620351020 022116 0 ustar 0000000 0000000 #
# TRACKER SCHEMA
#
# Class automatically gets these properties:
# creation = Date()
# activity = Date()
# creator = Link('user')
# actor = Link('user')
# The "Minimal" template gets only one class, the required "user"
# class. That's it. And even that has the bare minimum of properties.
# Note: roles is a comma-separated string of Role names
user = Class(db, "user", username=String(), password=Password(),
address=String(), alternate_addresses=String(), roles=String())
user.setkey("username")
db.security.addPermission(name='Register', klass='user',
description='User is allowed to register new user')
#
# TRACKER SECURITY SETTINGS
#
# See the configuration and customisation document for information
# about security setup.
#
# REGULAR USERS
#
# Give the regular users access to the web and email interface
db.security.addPermissionToRole('User', 'Web Access')
db.security.addPermissionToRole('User', 'Email Access')
db.security.addPermissionToRole('User', 'Rest Access')
db.security.addPermissionToRole('User', 'Xmlrpc Access')
# May users view other user information?
# Comment these lines out if you don't want them to
p = db.security.addPermission(name='View', klass='user',
properties=('id', 'username'))
db.security.addPermissionToRole('User', p)
# Users should be able to edit their own details -- this permission is
# limited to only the situation where the Viewed or Edited item is their own.
def own_record(db, userid, itemid):
'''Determine whether the userid matches the item being accessed.'''
return userid == itemid
p = db.security.addPermission(name='View', klass='user', check=own_record,
description="User is allowed to view their own user details")
db.security.addPermissionToRole('User', p)
p = db.security.addPermission(name='Edit', klass='user', check=own_record,
properties=('username', 'password', 'address', 'alternate_addresses'),
description="User is allowed to edit their own user details")
db.security.addPermissionToRole('User', p)
#
# ANONYMOUS USER PERMISSIONS
#
# Let anonymous users access the web interface. Note that almost all
# trackers will need this Permission. The only situation where it's not
# required is in a tracker that uses an HTTP Basic Authenticated front-end.
db.security.addPermissionToRole('Anonymous', 'Web Access')
# Let anonymous users access the email interface (note that this implies
# that they will be registered automatically, hence they will need the
# "Create" user Permission below)
db.security.addPermissionToRole('Anonymous', 'Email Access')
# Assign the appropriate permissions to the anonymous user's
# Anonymous Role. Choices here are:
# - Allow anonymous users to register
db.security.addPermissionToRole('Anonymous', 'Register', 'user')
# vim: set et sts=4 sw=4 :
code-7c8d3bd0deb6/share/roundup/templates/responsive/TEMPLATE-INFO.txt 0000644 0000000 0000000 00000000777 13620351020 023574 0 ustar 0000000 0000000 Name: responsive
Description: This issue tracker uses the same schema as devel.
The difference between devel and responsive templates
is the use of Twitter bootstrap (http://twitter.github.com/bootstrap/)
in templates and HTML5 markup.
Make sure the "static_files" setting in your config.ini of your
instance is set to the directory where the static files live
(the subdirectory "static" in the default of the template).
Intended-For: Developers
code-7c8d3bd0deb6/share/roundup/templates/responsive/config_ini.ini 0000644 0000000 0000000 00000000035 13620351020 023657 0 ustar 0000000 0000000 [main]
static_files = static
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/messagesummary.py 0000644 0000000 0000000 00000000752 13620351020 026470 0 ustar 0000000 0000000 from roundup.mailgw import parseContent
def summarygenerator(db, cl, nodeid, newvalues):
''' If the message doesn't have a summary, make one for it.
'''
if 'summary' in newvalues or 'content' not in newvalues:
return
summary, content = parseContent(newvalues['content'], config=db.config)
newvalues['summary'] = summary
def init(db):
# fire before changes are made
db.msg.audit('create', summarygenerator)
# vim: set filetype=python ts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/no_texthtml.py 0000644 0000000 0000000 00000000411 13620351020 025763 0 ustar 0000000 0000000
def audit_html_files(db, cl, nodeid, newvalues):
if 'type' in newvalues and newvalues['type'] == 'text/html':
newvalues['type'] = 'text/plain'
def init(db):
db.file.audit('set', audit_html_files)
db.file.audit('create', audit_html_files)
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/nosyreaction.py 0000644 0000000 0000000 00000011344 13620351020 026142 0 ustar 0000000 0000000 from roundup import roundupdb, hyperdb
def nosyreaction(db, cl, nodeid, oldvalues):
''' A standard detector is provided that watches for additions to the
"messages" property.
When a new message is added, the detector sends it to all the users on
the "nosy" list for the issue that are not already on the "recipients"
list of the message.
Those users are then appended to the "recipients" property on the
message, so multiple copies of a message are never sent to the same
user.
The journal recorded by the hyperdatabase on the "recipients" property
then provides a log of when the message was sent to whom.
'''
# send a copy of all new messages to the nosy list
for msgid in determineNewMessages(cl, nodeid, oldvalues):
try:
cl.nosymessage(nodeid, msgid, oldvalues)
except roundupdb.MessageSendError as message:
raise roundupdb.DetectorError(message)
def determineNewMessages(cl, nodeid, oldvalues):
''' Figure a list of the messages that are being added to the given
node in this transaction.
'''
messages = []
if oldvalues is None:
# the action was a create, so use all the messages in the create
messages = cl.get(nodeid, 'messages')
elif 'messages' in oldvalues:
# the action was a set (so adding new messages to an existing issue)
m = {}
for msgid in oldvalues['messages']:
m[msgid] = 1
messages = []
# figure which of the messages now on the issue weren't there before
for msgid in cl.get(nodeid, 'messages'):
if msgid not in m:
messages.append(msgid)
return messages
def updatenosy(db, cl, nodeid, newvalues):
'''Update the nosy list for changes to the assignedto
'''
# nodeid will be None if this is a new node
current_nosy = set()
if nodeid is None:
ok = ('new', 'yes')
else:
ok = ('yes',)
# old node, get the current values from the node if they haven't
# changed
if 'nosy' not in newvalues:
nosy = cl.get(nodeid, 'nosy')
for value in nosy:
current_nosy.add(value)
# if the nosy list changed in this transaction, init from the new value
if 'nosy' in newvalues:
nosy = newvalues.get('nosy', [])
for value in nosy:
if not db.hasnode('user', value):
continue
current_nosy.add(value)
new_nosy = set(current_nosy)
# add assignedto(s) to the nosy list
if 'assignedto' in newvalues and newvalues['assignedto'] is not None:
propdef = cl.getprops()
if isinstance(propdef['assignedto'], hyperdb.Link):
assignedto_ids = [newvalues['assignedto']]
elif isinstance(propdef['assignedto'], hyperdb.Multilink):
assignedto_ids = newvalues['assignedto']
for assignedto_id in assignedto_ids:
new_nosy.add(assignedto_id)
# see if there's any new messages - if so, possibly add the author and
# recipient to the nosy
if 'messages' in newvalues:
if nodeid is None:
ok = ('new', 'yes')
messages = newvalues['messages']
else:
ok = ('yes',)
# figure which of the messages now on the issue weren't
oldmessages = cl.get(nodeid, 'messages')
messages = []
for msgid in newvalues['messages']:
if msgid not in oldmessages:
messages.append(msgid)
# configs for nosy modifications
add_author = getattr(db.config, 'ADD_AUTHOR_TO_NOSY', 'new')
add_recips = getattr(db.config, 'ADD_RECIPIENTS_TO_NOSY', 'new')
# now for each new message:
msg = db.msg
for msgid in messages:
if add_author in ok:
authid = msg.get(msgid, 'author')
new_nosy.add(authid)
# add on the recipients of the message
if add_recips in ok:
for recipient in msg.get(msgid, 'recipients'):
new_nosy.add(recipient)
if current_nosy != new_nosy:
# that's it, save off the new nosy list
newvalues['nosy'] = list(new_nosy)
def init(db):
db.bug.react('create', nosyreaction)
db.bug.react('set', nosyreaction)
db.bug.audit('create', updatenosy)
db.bug.audit('set', updatenosy)
db.task.react('create', nosyreaction)
db.task.react('set', nosyreaction)
db.task.audit('create', updatenosy)
db.task.audit('set', updatenosy)
db.milestone.react('create', nosyreaction)
db.milestone.react('set', nosyreaction)
db.milestone.audit('create', updatenosy)
db.milestone.audit('set', updatenosy)
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/patches.py 0000644 0000000 0000000 00000002763 13620351020 025061 0 ustar 0000000 0000000 # Auditor for patch files
# Patches should be declared as text/plain (also .py files),
# independent of what the browser says, and
# the "patch" keyword should get set automatically.
import posixpath
patchtypes = ('.diff', '.patch')
sourcetypes = ('.diff', '.patch', '.py')
def ispatch(file, types):
return posixpath.splitext(file)[1] in types
def patches_text_plain(db, cl, nodeid, newvalues):
if ispatch(newvalues['name'], sourcetypes):
newvalues['type'] = 'text/plain'
def patches_keyword(db, cl, nodeid, newvalues):
# Check whether there are any new files
newfiles = set(newvalues.get('files',()))
if nodeid:
newfiles -= set(db.bug.get(nodeid, 'files'))
# Check whether any of these is a patch
newpatch = False
for fileid in newfiles:
if ispatch(db.file.get(fileid, 'name'), patchtypes):
newpatch = True
break
if newpatch:
# Add the patch keyword if its not already there
patchid = db.keyword.lookup("patch")
oldkeywords = []
if nodeid:
oldkeywords = db.bug.get(nodeid, 'keywords')
if patchid in oldkeywords:
# This is already marked as a patch
return
if 'keywords' not in newvalues:
newvalues['keywords'] = oldkeywords
newvalues['keywords'].append(patchid)
def init(db): pass
# db.file.audit('create', patches_text_plain)
# db.bug.audit('create', patches_keyword)
# db.bug.audit('set', patches_keyword)
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/severityauditor.py 0000644 0000000 0000000 00000000465 13620351020 026671 0 ustar 0000000 0000000
def init_severity(db, cl, nodeid, newvalues):
"""Make sure severity is set on new bugs"""
if 'severity' in newvalues and newvalues['severity']:
return
normal = db.severity.lookup('normal')
newvalues['severity'] = normal
def init(db): pass
#db.bug.audit('create', init_severity)
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/statusauditor.py 0000644 0000000 0000000 00000000505 13620351020 026335 0 ustar 0000000 0000000 def preset_new(db, cl, nodeid, newvalues):
""" Make sure the status is set on new bugs"""
if 'status' in newvalues and newvalues['status']:
return
new = db.status.lookup('new')
newvalues['status'] = new
def init(db): pass
# fire before changes are made
#db.bug.audit('create', preset_new)
code-7c8d3bd0deb6/share/roundup/templates/responsive/detectors/userauditor.py 0000644 0000000 0000000 00000010477 13620351020 026001 0 ustar 0000000 0000000 # Copyright (c) 2003 Richard Jones (richard@mechanicalcat.net)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
import re
# regular expression thanks to: http://www.regular-expressions.info/email.html
# this is the "99.99% solution for syntax only".
email_regexp = (r"[a-z0-9!#$%&'*+/=?^_`{|}~-]+(?:\.[a-z0-9!#$%&'*+/=?^_`{|}~-]+)*", r"(localhost|(?:[a-z0-9](?:[a-z0-9-]*[a-z0-9])?\.)+[a-z0-9](?:[a-z0-9-]*[a-z0-9]))")
email_rfc = re.compile('^' + email_regexp[0] + '@' + email_regexp[1] + '$', re.IGNORECASE)
email_local = re.compile('^' + email_regexp[0] + '$', re.IGNORECASE)
valid_username = re.compile('^[a-z0-9_@!%.+-]+$', re.IGNORECASE)
def valid_address(address):
''' If we see an @-symbol in the address then check against the full
RFC syntax. Otherwise it is a local-only address so only check
the local part of the RFC syntax.
'''
if '@' in address:
return email_rfc.match(address)
else:
return email_local.match(address)
def get_addresses(user):
''' iterate over all known addresses in a newvalues dict
this takes of the address/alterate_addresses handling
'''
if 'address' in user:
yield user['address']
if user.get('alternate_addresses', None):
for address in user['alternate_addresses'].split('\n'):
yield address
def audit_user_fields(db, cl, nodeid, newvalues):
''' Make sure user properties are valid.
- email address is syntactically valid
- email address is unique
- roles specified exist
- timezone is valid
- username matches A-z0-9_-.@!+% (email symbols)
'''
if 'username' in newvalues:
if not valid_username.match(newvalues['username']):
raise ValueError("Username/Login Name must consist only of the letters a-z (any case), digits 0-9 and the symbols: @._-!+%")
for address in get_addresses(newvalues):
if not valid_address(address):
raise ValueError('Email address syntax is invalid "%s"'%address)
check_main = db.user.stringFind(address=address)
# make sure none of the alts are owned by anyone other than us (x!=nodeid)
check_alts = [x for x in db.user.filter(None, {'alternate_addresses' : address}) if x != nodeid]
if check_main or check_alts:
raise ValueError('Email address %s already in use' % address)
newroles = newvalues.get('roles')
if newroles:
for rolename in [r.lower().strip() for r in newroles.split(',')]:
if rolename and rolename not in db.security.role:
raise ValueError('Role "%s" does not exist'%rolename)
tz = newvalues.get('timezone', None)
if tz:
# if they set a new timezone validate the timezone by attempting to
# use it before we store it to the db.
import roundup.date
import datetime
try:
TZ = roundup.date.get_timezone(tz)
dt = datetime.datetime.now()
local = TZ.localize(dt).utctimetuple()
except IOError:
raise ValueError('Timezone "%s" does not exist' % tz)
except ValueError:
raise ValueError('Timezone "%s" exceeds valid range [-23...23]' % tz)
def init(db):
# fire before changes are made
db.user.audit('set', audit_user_fields)
db.user.audit('create', audit_user_fields)
# vim: sts=4 sw=4 et si
code-7c8d3bd0deb6/share/roundup/templates/responsive/extensions/local_replace.py 0000644 0000000 0000000 00000005224 13620351020 026415 0 ustar 0000000 0000000 from __future__ import print_function
import re
hg_url_base = r'http://sourceforge.net/p/roundup/code/ci/'
substitutions = [ (re.compile(r'debian:\#(?P\d+)'),
r'debian#\g' ),
(re.compile(r'\#(?P\s*)(?P\d+)'),
r"#\g\g" ),
(re.compile(r'(?P^|\s+)issue(?P\s*)(?P\d+)'),
r"\gissue\g\g" ),
# matching the typical number:hash format of hg's own output
# and then use use hash instead of the number
(re.compile(r'(?P(^|\s+))(?P(rev|hg|changeset: ))(?P\d+):(?P[0-9a-fA-F]{12,40})(?P\W+|$)'),
r'\g\g\g:\g\g'),
# matching hg revison number or hash
(re.compile(r'(?P(^|\s+))(?P(revision|rev|r)\s?)(?P([1-9][0-9]*)|[0-9a-fA-F]{4,40})(?P\W+|$)'),
r'\g\g\g\g'),
]
def local_replace(message):
for cre, replacement in substitutions:
message = cre.sub(replacement, message)
return message
def init(instance):
instance.registerUtil('localReplace', local_replace)
def quicktest(msgstr, should_replace = True):
testcount['run'] += 1
replacedstr = local_replace(msgstr)
if not (not replacedstr == msgstr ) == should_replace:
print("(fail)", end=' ')
testcount['failed'] += 1
if replacedstr == msgstr:
print( "'%s'" % (msgstr,))
else:
print("'%s' -> '%s'" % (msgstr, replacedstr))
if "__main__" == __name__:
testcount = {'run':0 , 'failed': 0}
print("Replacement examples:")
quicktest(" debian:#222")
quicktest(" #555")
quicktest("issue333")
quicktest(" revision 222")
quicktest(" r 222")
quicktest(" wordthatendswithr 222", False)
quicktest(" references", False)
quicktest(" too many spaces r 222", False)
quicktest("re-evaluate", False)
quicktest("rex140eb", False)
quicktest("rev 012", False) # too short for a hg hash
quicktest("rev 0123")
quicktest("re140eb")
quicktest(" r7140eb")
quicktest(" rev7140eb ")
quicktest("rev7140eb")
quicktest("rev7140eb,")
quicktest("rev4891:ad3d628e73f2")
quicktest("hg4891:ad3d628e73f2")
quicktest("changeset: 4542:46239c21a1eb")
print()
print(testcount)
code-7c8d3bd0deb6/share/roundup/templates/responsive/extensions/spambayes.py 0000644 0000000 0000000 00000005222 13620351020 025612 0 ustar 0000000 0000000 import re, math
from roundup.cgi.actions import Action
from roundup.cgi.exceptions import *
from roundup.anypy import xmlrpc_
import socket
REVPAT = re.compile(r'(r[0-9]+\b|rev(ision)? [0-9]+\b)')
def extract_classinfo(db, classname, nodeid):
node = db.getnode(classname, nodeid)
authorage = node['creation'].timestamp() - \
db.getnode('user', node.get('author', node.get('creator')))['creation'].timestamp()
authorid = node.get('author', node.get('creator'))
content = db.getclass(classname).get(nodeid, 'content')
tokens = ["klass:%s" % classname,
"author:%s" % authorid,
"authorage:%d" % int(math.log(authorage)),
"hasrev:%s" % (REVPAT.search(content) is not None)]
return (content, tokens)
def train_spambayes(db, content, tokens, is_spam):
spambayes_uri = db.config.detectors['SPAMBAYES_URI']
server = xmlrpc_.client.ServerProxy(spambayes_uri, verbose=False)
try:
server.train({'content':content}, tokens, {}, is_spam)
return (True, None)
except (socket.error, xmlrpc_.client.Error) as e:
return (False, str(e))
class SpambayesClassify(Action):
permissionType = 'SB: May Classify'
def handle(self):
(content, tokens) = extract_classinfo(self.db,
self.classname, self.nodeid)
if "trainspam" in self.form:
is_spam = True
elif "trainham" in self.form:
is_spam = False
(status, errmsg) = train_spambayes(self.db, content, tokens,
is_spam)
node = self.db.getnode(self.classname, self.nodeid)
props = {}
if status:
if node.get('spambayes_misclassified', False):
props['spambayes_misclassified'] = True
props['spambayes_score'] = 1.0
s = " SPAM"
if not is_spam:
props['spambayes_score'] = 0.0
s = " HAM"
self.client.add_ok_message(self._('Message classified as') + s)
else:
self.client.add_error_message(self._('Unable to classify message, got error:') + errmsg)
klass = self.db.getclass(self.classname)
klass.set(self.nodeid, **props)
self.db.commit()
def sb_is_spam(obj):
cutoff_score = float(obj._db.config.detectors['SPAMBAYES_SPAM_CUTOFF'])
try:
score = obj['spambayes_score']
except KeyError:
return False
return score >= cutoff_score
def init(instance):
instance.registerAction("spambayes_classify", SpambayesClassify)
instance.registerUtil('sb_is_spam', sb_is_spam)
code-7c8d3bd0deb6/share/roundup/templates/responsive/extensions/timezone.py 0000644 0000000 0000000 00000001614 13620351020 025461 0 ustar 0000000 0000000 # Utility for replacing the simple input field for the timezone with
# a select-field that lists the available values.
import cgi
try:
import pytz
except ImportError:
pytz = None
def tzfield(prop, name, default):
if pytz:
value = prop.plain()
if '' == value:
value = default
else:
try:
value = "Etc/GMT%+d" % int(value)
except ValueError:
pass
l = ['')
return '\n'.join(l)
else:
return prop.field()
def init(instance):
instance.registerUtil('tzfield', tzfield)
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/_generic.404.html 0000644 0000000 0000000 00000000674 13620351020 024776 0 ustar 0000000 0000000
Item Not Found
Item Not Found
You are not allowed to view this page.Please login with your username and password.
You may edit the contents of the
class using this form. Commas, newlines and double quotes (") must be
handled delicately. You may include commas and newlines by enclosing the
values in double-quotes ("). Double quotes themselves must be quoted by
doubling ("").
Multilink properties have their multiple values colon (":") separated
(... ,"one:two:three", ...)
Remove entries by deleting their line. Add new entries by appending
them to the table - put an X in the id column.
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/favicon.ico 0000644 0000000 0000000 00000035356 13620351020 024155 0 ustar 0000000 0000000 h 6 00 % F ( @ 5 B G E 8 ?L9/& { ; ND:0& @ XND:0% A 5 , ! < 5bXN=4*!y A u@os=p: KlbXNC9/$ z 4}CרyAt=K2 [olaWMC9.$ AF}Dx@g6 NnjaWMB8.$ GJG|Cv?i6E1\ L H G AEkA8-# FMIF{Bu>p;j7i6h5`2 OEB7- =ÏPLHEyAt=o:i6i6i6`2 CKA6 $ƑROKH}Dx@s=m9i6i6i6 HUJ>
ďN~LH}Ct=l9f6l8i6i6 H IF{Bu>p;j7i6 A LEyAt>o:i6 ( NJH~Dx@q94/*% | D ! OMHC>94/*%s{z 3
WRMHC>94/* : [VRMHC=94/ ; `[VQMHC=83/*% ,
e`[VQLGC=83.)% ' $ 7 A F 6je`[VQL Z N H H H H H H H H H F A 6 !
v>vzBبy@xAv? Hoje`[VQLGB=83.)$ { C ! }DFE|CzBx@ Htojd_[VQLGB=83.)$ { 9 H HGF~D|CyA Iusojd_ZUQLGB=83.)$ H IJIGF}D{B Muusnid_ZUPLGB=82.)$ ud -KKJHGE}CuR+otuusnid_ZUPKFB=82-($ 8MLKIHF~Ep=auuusnid_ZUPKFA<82-(# ÏPOMKJHGE}Dp:bF#e L I H H H H H H HGفMKFA<72-(" <őQÏPNMKJHFE|CzBx@v?s=qs=p;n:l8j6i6i6h5dF$pMKFA<72* .ǓSǒRĐPOMLJIGF~D{ByAw?t>r * ̓U~ʕTǒRĐQONLJIGF~D|CyAw@u>s=p;n9l8i6i6 H^YTOJA ̖SkǓRƒRďPOMLJIGE}D{ByAw?t>rs=q;o:l8 H ONLJIGF~D{CyAw?u>rrm9 ɐOCƐPĐPOMLJIGF~D{ByAt= ǛXĐRO˿MؾMKJHF~CتzBw?\ ( 0 ` %
# . 6 : = B E A = : 3 + ! 3,s.,+&%# ݞ o L @ . 9C<<:730-)&# `|Z > BPFC@=:730-)&# r > K3LJGC@=9630-)&" C$ a~Y + RPMJGC@=9630-)&"^ݞ 9 VTPMJGC@=9630,)i A ZWTPMJFC@=963/,^ G ]ZWTPMIFC@=962/,I I `]ZWTPMIFC@=962/,)&" I d`]ZVSPMIFC?<962/,(%" 7 gd`]YVSPMIFC?<962/,(%" + - ? G I I I 7jgd`]YVSPMI \ P I I I I I I I I I I I I I I I I F ; ' j;+u>zBzByAw@v?t> Imjfc`]YVSOLIFC?<952/,(%" ӓ L 2 nD%}D~E}C{BzAx@w?u> Ipmjfc`]YVSOLIFC?<852/,(%! O + EرFE~D|C{ByAx@v? Itpmjfc`]YVSOLIFB?<852/+(%! ڟ C DoHGFE}D|CzByAw@ Iuspmjfc`\YVSOLIEB?<852.+(%!
a~Y + IضIHGF~E}D{CzBxA Iuuspmjfc_\YVSOLHEB?<852.+(%! ӓ = KKJIGFE~D|C{BzA Ksuuspmjfc_\YVSOLHEB?<852.+(%! J HmKJIHGFE~D|C{BS< Yruuusplifc_\YUROLHEB>;852.+'$!
yc )LLKJIHGFE}D|C_4juuuusolifc_\YUROLHEB>;852.+'$! Ւ 2LؽMLKJIHGF~E}DwA Pruuuusolifc_\YUROLHEB>;851.+'$! :N㿋NLKJIHGFE~D|Ce7J`ruuuusolieb_\YUROKHEB>;841.+'$! <ONMLKJIHGFE~D|Ce7<{Yjruuusolieb_\YURNKHEB>;841.+'$! <ÏPONMLKJIHGFE}D|Cv?م_4 Q K I I I I I I I I I I I G9YLMKHEB>;841.+'$ <ŐQÎPONMLKJIHGF~E}C{BzAx@w?u>t=r;841-*'" 9ŏPĐQPONLKJIHGFE~D|C{ByAx@v?u>s=r;841-*% 1ƑQőQďPONMLKJIHGFE~D|C{ByAw@v?t>s=q;741-% )ǑQǒRŐQÏPONMLKJIHGFE}D|CzByAw@v?t>s=qt=rs=rs=qs=qt=rs=rs=qs=qt=rs=rs=qt=rs=rs=qs=l8 ǐRƑRĐQǕ[ܿƧXLKJIHGF~E}C{BzAx@w?u>r<^3F
ǛXŒPƑQĐPONMLKJIHGFE~D|C{ByAx@t>j7e ǛXőQďOÏPONMLKJIHGFE}D|CzBw?؝nList of files - <span tal:replace="config/TRACKER_NAME" i18n:name="tracker" />List of files
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/help_controls.js 0000644 0000000 0000000 00000021406 13620351020 025234 0 ustar 0000000 0000000 // initial values for either Nosy, Superseder, Topic and Waiting On,
// depending on which has called
original_field = form[field].value;
// Some browsers (ok, IE) don't define the "undefined" variable.
undefined = document.geez_IE_is_really_friggin_annoying;
function trim(value) {
var temp = value;
var obj = /^(\s*)([\W\w]*)(\b\s*$)/;
if (obj.test(temp)) { temp = temp.replace(obj, '$2'); }
var obj = / /g;
while (temp.match(obj)) { temp = temp.replace(obj, " "); }
return temp;
}
function determineList() {
// generate a comma-separated list of the checked items
var list = new String('');
// either a checkbox object or an array of checkboxes
var check = document.frm_help.check;
if ((check.length == undefined) && (check.checked != undefined)) {
// only one checkbox on page
if (check.checked) {
list = check.value;
}
} else {
// array of checkboxes
for (box=0; box < check.length; box++) {
if (check[box].checked) {
if (list.length == 0) {
separator = '';
}
else {
separator = ',';
}
// we used to use an Array and push / join, but IE5.0 sux
list = list + separator + check[box].value;
}
}
}
return list;
}
/**
* update the field in the opening window;
* the text_field variable must be set in the calling page
*/
function updateOpener() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = text_field.value;
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updateList() {
// write back to opener window
if (document.frm_help.check==undefined) { return; }
form[field].value = determineList();
/* trigger change event on the field we changed */
if ("createEvent" in document) {
var evt = document.createEvent("HTMLEvents");
evt.initEvent("change", true, true);
form[field].dispatchEvent(evt);
}
else
form[field].fireEvent("onchange");
}
function updatePreview() {
// update the preview box
if (document.frm_help.check==undefined) { return; }
writePreview(determineList());
}
function clearList() {
// uncheck all checkboxes
if (document.frm_help.check==undefined) { return; }
for (box=0; box < document.frm_help.check.length; box++) {
document.frm_help.check[box].checked = false;
}
}
function reviseList_framed(form, textfield) {
// update the checkboxes based on the preview field
// alert('reviseList_framed')
// alert(form)
if (form.check==undefined)
return;
// alert(textfield)
var to_check;
var list = textfield.value.split(",");
if (form.check.length==undefined) {
check = form.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < form.check.length; box++) {
check = form.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function reviseList(vals) {
// update the checkboxes based on the preview field
if (document.frm_help.check==undefined) { return; }
var to_check;
var list = vals.split(",");
if (document.frm_help.check.length==undefined) {
check = document.frm_help.check;
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
} else {
for (box=0; box < document.frm_help.check.length; box++) {
check = document.frm_help.check[box];
to_check = false;
for (val in list) {
if (check.value==trim(list[val])) {
to_check = true;
break;
}
}
check.checked = to_check;
}
}
}
function resetList() {
// reset preview and check boxes to initial values
if (document.frm_help.check==undefined) { return; }
writePreview(original_field);
reviseList(original_field);
}
function writePreview(val) {
// writes a value to the text_preview
document.frm_help.text_preview.value = val;
}
function focusField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus) {obj.focus();}
}
}
function selectField(name) {
for(i=0; i < document.forms.length; ++i) {
var obj = document.forms[i].elements[name];
if (obj && obj.focus){obj.focus();}
if (obj && obj.select){obj.select();}
}
}
function checkRequiredFields(fields)
{
var bonk='';
var res='';
var argv = checkRequiredFields.arguments;
var argc = argv.length;
var input = '';
var val='';
for (var i=0; i < argc; i++) {
fi = argv[i];
input = document.getElementById(fi);
if (input) {
val = input.value
if (val == '' || val == '-1' || val == -1) {
if (res == '') {
res = fi;
bonk = input;
} else {
res += ', '+fi;
}
}
} else {
alert('Field with id='+fi+' not found!')
}
}
if (res == '') {
return submit_once();
} else {
alert('Missing value here ('+res+')!');
if (window.event && window.event.returnvalue) {
event.returnValue = 0; // work-around for IE
}
bonk.focus();
return false;
}
}
/**
* seeks the given value (2nd argument)
* in the value of the given input element (1st argument),
* which is considered a list of values, separated by commas
*/
function has_value(input, val)
{
var actval = input.value
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i remove_val()
*
* This will work nicely even for batched lists
*/
function append_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
if (actval == '') {
feld.value = val
} else {
var arr = feld.value.split(',');
var max = arr.length;
for (i=0;i append_val()
*/
function remove_val(name, val)
{
var feld = document.itemSynopsis[name];
var actval = feld.value;
var changed=false;
if (actval == '') {
return
} else {
var arr = feld.value.split(',');
var max = arr.length;
var neu = ''
for (i=0;iList of classes - <span
i18n:name="tracker" tal:replace="config/TRACKER_NAME" />List of classes
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/home.html 0000644 0000000 0000000 00000000743 13620351020 023642 0 ustar 0000000 0000000
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/jquery.js 0000644 0000000 0000000 00000353673 13620351020 023716 0 ustar 0000000 0000000 /*!
* jQuery JavaScript Library v1.3.2
* http://jquery.com/
*
* Copyright (c) 2009 John Resig
* Dual licensed under the MIT and GPL licenses.
* http://docs.jquery.com/License
*
* Date: 2009-02-19 17:34:21 -0500 (Thu, 19 Feb 2009)
* Revision: 6246
*/
(function(){
var
// Will speed up references to window, and allows munging its name.
window = this,
// Will speed up references to undefined, and allows munging its name.
undefined,
// Map over jQuery in case of overwrite
_jQuery = window.jQuery,
// Map over the $ in case of overwrite
_$ = window.$,
jQuery = window.jQuery = window.$ = function( selector, context ) {
// The jQuery object is actually just the init constructor 'enhanced'
return new jQuery.fn.init( selector, context );
},
// A simple way to check for HTML strings or ID strings
// (both of which we optimize for)
quickExpr = /^[^<]*(<(.|\s)+>)[^>]*$|^#([\w-]+)$/,
// Is it a simple selector
isSimple = /^.[^:#\[\.,]*$/;
jQuery.fn = jQuery.prototype = {
init: function( selector, context ) {
// Make sure that a selection was provided
selector = selector || document;
// Handle $(DOMElement)
if ( selector.nodeType ) {
this[0] = selector;
this.length = 1;
this.context = selector;
return this;
}
// Handle HTML strings
if ( typeof selector === "string" ) {
// Are we dealing with HTML string or an ID?
var match = quickExpr.exec( selector );
// Verify a match, and that no context was specified for #id
if ( match && (match[1] || !context) ) {
// HANDLE: $(html) -> $(array)
if ( match[1] )
selector = jQuery.clean( [ match[1] ], context );
// HANDLE: $("#id")
else {
var elem = document.getElementById( match[3] );
// Handle the case where IE and Opera return items
// by name instead of ID
if ( elem && elem.id != match[3] )
return jQuery().find( selector );
// Otherwise, we inject the element directly into the jQuery object
var ret = jQuery( elem || [] );
ret.context = document;
ret.selector = selector;
return ret;
}
// HANDLE: $(expr, [context])
// (which is just equivalent to: $(content).find(expr)
} else
return jQuery( context ).find( selector );
// HANDLE: $(function)
// Shortcut for document ready
} else if ( jQuery.isFunction( selector ) )
return jQuery( document ).ready( selector );
// Make sure that old selector state is passed along
if ( selector.selector && selector.context ) {
this.selector = selector.selector;
this.context = selector.context;
}
return this.setArray(jQuery.isArray( selector ) ?
selector :
jQuery.makeArray(selector));
},
// Start with an empty selector
selector: "",
// The current version of jQuery being used
jquery: "1.3.2",
// The number of elements contained in the matched element set
size: function() {
return this.length;
},
// Get the Nth element in the matched element set OR
// Get the whole matched element set as a clean array
get: function( num ) {
return num === undefined ?
// Return a 'clean' array
Array.prototype.slice.call( this ) :
// Return just the object
this[ num ];
},
// Take an array of elements and push it onto the stack
// (returning the new matched element set)
pushStack: function( elems, name, selector ) {
// Build a new jQuery matched element set
var ret = jQuery( elems );
// Add the old object onto the stack (as a reference)
ret.prevObject = this;
ret.context = this.context;
if ( name === "find" )
ret.selector = this.selector + (this.selector ? " " : "") + selector;
else if ( name )
ret.selector = this.selector + "." + name + "(" + selector + ")";
// Return the newly-formed element set
return ret;
},
// Force the current matched set of elements to become
// the specified array of elements (destroying the stack in the process)
// You should use pushStack() in order to do this, but maintain the stack
setArray: function( elems ) {
// Resetting the length to 0, then using the native Array push
// is a super-fast way to populate an object with array-like properties
this.length = 0;
Array.prototype.push.apply( this, elems );
return this;
},
// Execute a callback for every element in the matched set.
// (You can seed the arguments with an array of args, but this is
// only used internally.)
each: function( callback, args ) {
return jQuery.each( this, callback, args );
},
// Determine the position of an element within
// the matched set of elements
index: function( elem ) {
// Locate the position of the desired element
return jQuery.inArray(
// If it receives a jQuery object, the first element is used
elem && elem.jquery ? elem[0] : elem
, this );
},
attr: function( name, value, type ) {
var options = name;
// Look for the case where we're accessing a style value
if ( typeof name === "string" )
if ( value === undefined )
return this[0] && jQuery[ type || "attr" ]( this[0], name );
else {
options = {};
options[ name ] = value;
}
// Check to see if we're setting style values
return this.each(function(i){
// Set all the styles
for ( name in options )
jQuery.attr(
type ?
this.style :
this,
name, jQuery.prop( this, options[ name ], type, i, name )
);
});
},
css: function( key, value ) {
// ignore negative width and height values
if ( (key == 'width' || key == 'height') && parseFloat(value) < 0 )
value = undefined;
return this.attr( key, value, "curCSS" );
},
text: function( text ) {
if ( typeof text !== "object" && text != null )
return this.empty().append( (this[0] && this[0].ownerDocument || document).createTextNode( text ) );
var ret = "";
jQuery.each( text || this, function(){
jQuery.each( this.childNodes, function(){
if ( this.nodeType != 8 )
ret += this.nodeType != 1 ?
this.nodeValue :
jQuery.fn.text( [ this ] );
});
});
return ret;
},
wrapAll: function( html ) {
if ( this[0] ) {
// The elements to wrap the target around
var wrap = jQuery( html, this[0].ownerDocument ).clone();
if ( this[0].parentNode )
wrap.insertBefore( this[0] );
wrap.map(function(){
var elem = this;
while ( elem.firstChild )
elem = elem.firstChild;
return elem;
}).append(this);
}
return this;
},
wrapInner: function( html ) {
return this.each(function(){
jQuery( this ).contents().wrapAll( html );
});
},
wrap: function( html ) {
return this.each(function(){
jQuery( this ).wrapAll( html );
});
},
append: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.appendChild( elem );
});
},
prepend: function() {
return this.domManip(arguments, true, function(elem){
if (this.nodeType == 1)
this.insertBefore( elem, this.firstChild );
});
},
before: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this );
});
},
after: function() {
return this.domManip(arguments, false, function(elem){
this.parentNode.insertBefore( elem, this.nextSibling );
});
},
end: function() {
return this.prevObject || jQuery( [] );
},
// For internal use only.
// Behaves like an Array's method, not like a jQuery method.
push: [].push,
sort: [].sort,
splice: [].splice,
find: function( selector ) {
if ( this.length === 1 ) {
var ret = this.pushStack( [], "find", selector );
ret.length = 0;
jQuery.find( selector, this[0], ret );
return ret;
} else {
return this.pushStack( jQuery.unique(jQuery.map(this, function(elem){
return jQuery.find( selector, elem );
})), "find", selector );
}
},
clone: function( events ) {
// Do the clone
var ret = this.map(function(){
if ( !jQuery.support.noCloneEvent && !jQuery.isXMLDoc(this) ) {
// IE copies events bound via attachEvent when
// using cloneNode. Calling detachEvent on the
// clone will also remove the events from the orignal
// In order to get around this, we use innerHTML.
// Unfortunately, this means some modifications to
// attributes in IE that are actually only stored
// as properties will not be copied (such as the
// the name attribute on an input).
var html = this.outerHTML;
if ( !html ) {
var div = this.ownerDocument.createElement("div");
div.appendChild( this.cloneNode(true) );
html = div.innerHTML;
}
return jQuery.clean([html.replace(/ jQuery\d+="(?:\d+|null)"/g, "").replace(/^\s*/, "")])[0];
} else
return this.cloneNode(true);
});
// Copy the events from the original to the clone
if ( events === true ) {
var orig = this.find("*").andSelf(), i = 0;
ret.find("*").andSelf().each(function(){
if ( this.nodeName !== orig[i].nodeName )
return;
var events = jQuery.data( orig[i], "events" );
for ( var type in events ) {
for ( var handler in events[ type ] ) {
jQuery.event.add( this, type, events[ type ][ handler ], events[ type ][ handler ].data );
}
}
i++;
});
}
// Return the cloned set
return ret;
},
filter: function( selector ) {
return this.pushStack(
jQuery.isFunction( selector ) &&
jQuery.grep(this, function(elem, i){
return selector.call( elem, i );
}) ||
jQuery.multiFilter( selector, jQuery.grep(this, function(elem){
return elem.nodeType === 1;
}) ), "filter", selector );
},
closest: function( selector ) {
var pos = jQuery.expr.match.POS.test( selector ) ? jQuery(selector) : null,
closer = 0;
return this.map(function(){
var cur = this;
while ( cur && cur.ownerDocument ) {
if ( pos ? pos.index(cur) > -1 : jQuery(cur).is(selector) ) {
jQuery.data(cur, "closest", closer);
return cur;
}
cur = cur.parentNode;
closer++;
}
});
},
not: function( selector ) {
if ( typeof selector === "string" )
// test special case where just one selector is passed in
if ( isSimple.test( selector ) )
return this.pushStack( jQuery.multiFilter( selector, this, true ), "not", selector );
else
selector = jQuery.multiFilter( selector, this );
var isArrayLike = selector.length && selector[selector.length - 1] !== undefined && !selector.nodeType;
return this.filter(function() {
return isArrayLike ? jQuery.inArray( this, selector ) < 0 : this != selector;
});
},
add: function( selector ) {
return this.pushStack( jQuery.unique( jQuery.merge(
this.get(),
typeof selector === "string" ?
jQuery( selector ) :
jQuery.makeArray( selector )
)));
},
is: function( selector ) {
return !!selector && jQuery.multiFilter( selector, this ).length > 0;
},
hasClass: function( selector ) {
return !!selector && this.is( "." + selector );
},
val: function( value ) {
if ( value === undefined ) {
var elem = this[0];
if ( elem ) {
if( jQuery.nodeName( elem, 'option' ) )
return (elem.attributes.value || {}).specified ? elem.value : elem.text;
// We need to handle select boxes special
if ( jQuery.nodeName( elem, "select" ) ) {
var index = elem.selectedIndex,
values = [],
options = elem.options,
one = elem.type == "select-one";
// Nothing was selected
if ( index < 0 )
return null;
// Loop through all the selected options
for ( var i = one ? index : 0, max = one ? index + 1 : options.length; i < max; i++ ) {
var option = options[ i ];
if ( option.selected ) {
// Get the specifc value for the option
value = jQuery(option).val();
// We don't need an array for one selects
if ( one )
return value;
// Multi-Selects return an array
values.push( value );
}
}
return values;
}
// Everything else, we just grab the value
return (elem.value || "").replace(/\r/g, "");
}
return undefined;
}
if ( typeof value === "number" )
value += '';
return this.each(function(){
if ( this.nodeType != 1 )
return;
if ( jQuery.isArray(value) && /radio|checkbox/.test( this.type ) )
this.checked = (jQuery.inArray(this.value, value) >= 0 ||
jQuery.inArray(this.name, value) >= 0);
else if ( jQuery.nodeName( this, "select" ) ) {
var values = jQuery.makeArray(value);
jQuery( "option", this ).each(function(){
this.selected = (jQuery.inArray( this.value, values ) >= 0 ||
jQuery.inArray( this.text, values ) >= 0);
});
if ( !values.length )
this.selectedIndex = -1;
} else
this.value = value;
});
},
html: function( value ) {
return value === undefined ?
(this[0] ?
this[0].innerHTML.replace(/ jQuery\d+="(?:\d+|null)"/g, "") :
null) :
this.empty().append( value );
},
replaceWith: function( value ) {
return this.after( value ).remove();
},
eq: function( i ) {
return this.slice( i, +i + 1 );
},
slice: function() {
return this.pushStack( Array.prototype.slice.apply( this, arguments ),
"slice", Array.prototype.slice.call(arguments).join(",") );
},
map: function( callback ) {
return this.pushStack( jQuery.map(this, function(elem, i){
return callback.call( elem, i, elem );
}));
},
andSelf: function() {
return this.add( this.prevObject );
},
domManip: function( args, table, callback ) {
if ( this[0] ) {
var fragment = (this[0].ownerDocument || this[0]).createDocumentFragment(),
scripts = jQuery.clean( args, (this[0].ownerDocument || this[0]), fragment ),
first = fragment.firstChild;
if ( first )
for ( var i = 0, l = this.length; i < l; i++ )
callback.call( root(this[i], first), this.length > 1 || i > 0 ?
fragment.cloneNode(true) : fragment );
if ( scripts )
jQuery.each( scripts, evalScript );
}
return this;
function root( elem, cur ) {
return table && jQuery.nodeName(elem, "table") && jQuery.nodeName(cur, "tr") ?
(elem.getElementsByTagName("tbody")[0] ||
elem.appendChild(elem.ownerDocument.createElement("tbody"))) :
elem;
}
}
};
// Give the init function the jQuery prototype for later instantiation
jQuery.fn.init.prototype = jQuery.fn;
function evalScript( i, elem ) {
if ( elem.src )
jQuery.ajax({
url: elem.src,
async: false,
dataType: "script"
});
else
jQuery.globalEval( elem.text || elem.textContent || elem.innerHTML || "" );
if ( elem.parentNode )
elem.parentNode.removeChild( elem );
}
function now(){
return +new Date;
}
jQuery.extend = jQuery.fn.extend = function() {
// copy reference to target object
var target = arguments[0] || {}, i = 1, length = arguments.length, deep = false, options;
// Handle a deep copy situation
if ( typeof target === "boolean" ) {
deep = target;
target = arguments[1] || {};
// skip the boolean and the target
i = 2;
}
// Handle case when target is a string or something (possible in deep copy)
if ( typeof target !== "object" && !jQuery.isFunction(target) )
target = {};
// extend jQuery itself if only one argument is passed
if ( length == i ) {
target = this;
--i;
}
for ( ; i < length; i++ )
// Only deal with non-null/undefined values
if ( (options = arguments[ i ]) != null )
// Extend the base object
for ( var name in options ) {
var src = target[ name ], copy = options[ name ];
// Prevent never-ending loop
if ( target === copy )
continue;
// Recurse if we're merging object values
if ( deep && copy && typeof copy === "object" && !copy.nodeType )
target[ name ] = jQuery.extend( deep,
// Never move original objects, clone them
src || ( copy.length != null ? [ ] : { } )
, copy );
// Don't bring in undefined values
else if ( copy !== undefined )
target[ name ] = copy;
}
// Return the modified object
return target;
};
// exclude the following css properties to add px
var exclude = /z-?index|font-?weight|opacity|zoom|line-?height/i,
// cache defaultView
defaultView = document.defaultView || {},
toString = Object.prototype.toString;
jQuery.extend({
noConflict: function( deep ) {
window.$ = _$;
if ( deep )
window.jQuery = _jQuery;
return jQuery;
},
// See test/unit/core.js for details concerning isFunction.
// Since version 1.3, DOM methods and functions like alert
// aren't supported. They return false on IE (#2968).
isFunction: function( obj ) {
return toString.call(obj) === "[object Function]";
},
isArray: function( obj ) {
return toString.call(obj) === "[object Array]";
},
// check if an element is in a (or is an) XML document
isXMLDoc: function( elem ) {
return elem.nodeType === 9 && elem.documentElement.nodeName !== "HTML" ||
!!elem.ownerDocument && jQuery.isXMLDoc( elem.ownerDocument );
},
// Evalulates a script in a global context
globalEval: function( data ) {
if ( data && /\S/.test(data) ) {
// Inspired by code by Andrea Giammarchi
// http://webreflection.blogspot.com/2007/08/global-scope-evaluation-and-dom.html
var head = document.getElementsByTagName("head")[0] || document.documentElement,
script = document.createElement("script");
script.type = "text/javascript";
if ( jQuery.support.scriptEval )
script.appendChild( document.createTextNode( data ) );
else
script.text = data;
// Use insertBefore instead of appendChild to circumvent an IE6 bug.
// This arises when a base node is used (#2709).
head.insertBefore( script, head.firstChild );
head.removeChild( script );
}
},
nodeName: function( elem, name ) {
return elem.nodeName && elem.nodeName.toUpperCase() == name.toUpperCase();
},
// args is for internal usage only
each: function( object, callback, args ) {
var name, i = 0, length = object.length;
if ( args ) {
if ( length === undefined ) {
for ( name in object )
if ( callback.apply( object[ name ], args ) === false )
break;
} else
for ( ; i < length; )
if ( callback.apply( object[ i++ ], args ) === false )
break;
// A special, fast, case for the most common use of each
} else {
if ( length === undefined ) {
for ( name in object )
if ( callback.call( object[ name ], name, object[ name ] ) === false )
break;
} else
for ( var value = object[0];
i < length && callback.call( value, i, value ) !== false; value = object[++i] ){}
}
return object;
},
prop: function( elem, value, type, i, name ) {
// Handle executable functions
if ( jQuery.isFunction( value ) )
value = value.call( elem, i );
// Handle passing in a number to a CSS property
return typeof value === "number" && type == "curCSS" && !exclude.test( name ) ?
value + "px" :
value;
},
className: {
// internal only, use addClass("class")
add: function( elem, classNames ) {
jQuery.each((classNames || "").split(/\s+/), function(i, className){
if ( elem.nodeType == 1 && !jQuery.className.has( elem.className, className ) )
elem.className += (elem.className ? " " : "") + className;
});
},
// internal only, use removeClass("class")
remove: function( elem, classNames ) {
if (elem.nodeType == 1)
elem.className = classNames !== undefined ?
jQuery.grep(elem.className.split(/\s+/), function(className){
return !jQuery.className.has( classNames, className );
}).join(" ") :
"";
},
// internal only, use hasClass("class")
has: function( elem, className ) {
return elem && jQuery.inArray( className, (elem.className || elem).toString().split(/\s+/) ) > -1;
}
},
// A method for quickly swapping in/out CSS properties to get correct calculations
swap: function( elem, options, callback ) {
var old = {};
// Remember the old values, and insert the new ones
for ( var name in options ) {
old[ name ] = elem.style[ name ];
elem.style[ name ] = options[ name ];
}
callback.call( elem );
// Revert the old values
for ( var name in options )
elem.style[ name ] = old[ name ];
},
css: function( elem, name, force, extra ) {
if ( name == "width" || name == "height" ) {
var val, props = { position: "absolute", visibility: "hidden", display:"block" }, which = name == "width" ? [ "Left", "Right" ] : [ "Top", "Bottom" ];
function getWH() {
val = name == "width" ? elem.offsetWidth : elem.offsetHeight;
if ( extra === "border" )
return;
jQuery.each( which, function() {
if ( !extra )
val -= parseFloat(jQuery.curCSS( elem, "padding" + this, true)) || 0;
if ( extra === "margin" )
val += parseFloat(jQuery.curCSS( elem, "margin" + this, true)) || 0;
else
val -= parseFloat(jQuery.curCSS( elem, "border" + this + "Width", true)) || 0;
});
}
if ( elem.offsetWidth !== 0 )
getWH();
else
jQuery.swap( elem, props, getWH );
return Math.max(0, Math.round(val));
}
return jQuery.curCSS( elem, name, force );
},
curCSS: function( elem, name, force ) {
var ret, style = elem.style;
// We need to handle opacity special in IE
if ( name == "opacity" && !jQuery.support.opacity ) {
ret = jQuery.attr( style, "opacity" );
return ret == "" ?
"1" :
ret;
}
// Make sure we're using the right name for getting the float value
if ( name.match( /float/i ) )
name = styleFloat;
if ( !force && style && style[ name ] )
ret = style[ name ];
else if ( defaultView.getComputedStyle ) {
// Only "float" is needed here
if ( name.match( /float/i ) )
name = "float";
name = name.replace( /([A-Z])/g, "-$1" ).toLowerCase();
var computedStyle = defaultView.getComputedStyle( elem, null );
if ( computedStyle )
ret = computedStyle.getPropertyValue( name );
// We should always get a number back from opacity
if ( name == "opacity" && ret == "" )
ret = "1";
} else if ( elem.currentStyle ) {
var camelCase = name.replace(/\-(\w)/g, function(all, letter){
return letter.toUpperCase();
});
ret = elem.currentStyle[ name ] || elem.currentStyle[ camelCase ];
// From the awesome hack by Dean Edwards
// http://erik.eae.net/archives/2007/07/27/18.54.15/#comment-102291
// If we're not dealing with a regular pixel number
// but a number that has a weird ending, we need to convert it to pixels
if ( !/^\d+(px)?$/i.test( ret ) && /^\d/.test( ret ) ) {
// Remember the original values
var left = style.left, rsLeft = elem.runtimeStyle.left;
// Put in the new values to get a computed value out
elem.runtimeStyle.left = elem.currentStyle.left;
style.left = ret || 0;
ret = style.pixelLeft + "px";
// Revert the changed values
style.left = left;
elem.runtimeStyle.left = rsLeft;
}
}
return ret;
},
clean: function( elems, context, fragment ) {
context = context || document;
// !context.createElement fails in IE with an error but returns typeof 'object'
if ( typeof context.createElement === "undefined" )
context = context.ownerDocument || context[0] && context[0].ownerDocument || document;
// If a single string is passed in and it's a single tag
// just do a createElement and skip the rest
if ( !fragment && elems.length === 1 && typeof elems[0] === "string" ) {
var match = /^<(\w+)\s*\/?>$/.exec(elems[0]);
if ( match )
return [ context.createElement( match[1] ) ];
}
var ret = [], scripts = [], div = context.createElement("div");
jQuery.each(elems, function(i, elem){
if ( typeof elem === "number" )
elem += '';
if ( !elem )
return;
// Convert html string into DOM nodes
if ( typeof elem === "string" ) {
// Fix "XHTML"-style tags in all browsers
elem = elem.replace(/(<(\w+)[^>]*?)\/>/g, function(all, front, tag){
return tag.match(/^(abbr|br|col|img|input|link|meta|param|hr|area|embed)$/i) ?
all :
front + ">";
});
// Trim whitespace, otherwise indexOf won't work as expected
var tags = elem.replace(/^\s+/, "").substring(0, 10).toLowerCase();
var wrap =
// option or optgroup
!tags.indexOf("", "" ] ||
!tags.indexOf("", "" ] ||
tags.match(/^<(thead|tbody|tfoot|colg|cap)/) &&
[ 1, "
", "
" ] ||
!tags.indexOf("", "
" ] ||
// matched above
(!tags.indexOf("
", "
" ] ||
!tags.indexOf("
", "
" ] ||
// IE can't serialize and
New KeywordNew Keyword EditingKeywordKeyword Editing
You are not allowed to view this page.
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/msg.index.html 0000644 0000000 0000000 00000001651 13620351020 024605 0 ustar 0000000 0000000 List of messages - <span tal:replace="config/TRACKER_NAME"
i18n:name="tracker"/>Message listing
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/query.item.html 0000644 0000000 0000000 00000001133 13620351020 025006 0 ustar 0000000 0000000
You can not view query
You can not view query.
You are not allowed to view
with id
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/query.js 0000644 0000000 0000000 00000001515 13620351020 023525 0 ustar 0000000 0000000 var action;
function display(data)
{
var list = $("div.list");
list.empty();
list.append(data);
}
// Run a query with a specific starting point and size
function query_start(start, size)
{
var inputs = $(":input");
var data = {}
if (start > 0) data['@startwith'] = start
if (size > -1) data['@pagesize'] = size
for (var i = 0; i < inputs.length; i++)
data[inputs[i].name] = inputs[i].value;
jQuery.get(action, data, display);
return false;
}
// Run a query, starting at the first element
function query()
{
return query_start(0, -1)
}
// Deactivate the form's submit action, and instead
// invoke the action as part of (inline) query.
function replace_submit()
{
var form = $("form");
action = form.attr("action");
form.attr("action",""); // reset
form.submit(query);
}
$(document).ready(replace_submit);
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/task.index.html 0000644 0000000 0000000 00000015577 13620351020 024775 0 ustar 0000000 0000000
<span tal:omit-tag="true" i18n:translate="" >List of tasks</span>
<span tal:condition="request/dispname"
tal:replace="python:' - %s '%request.dispname"
/> - <span tal:replace="config/TRACKER_NAME" />
List of tasks
You have two options if you have forgotten your password.
If you know the email address you registered with, enter it below.
If your user was automatically created during
import from the old sourceforge tracker, your e-mail address is
<Sourceforge username>@users.sourceforge.net. The mail address
associated with your account can be changed after login.
A confirmation email will be sent to you -
please follow the instructions within it to complete the reset process.
g
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/user.help-search.html 0000644 0000000 0000000 00000005660 13620351020 026065 0 ustar 0000000 0000000
Search input for user helper
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/user.help.html 0000644 0000000 0000000 00000012417 13620351020 024620 0 ustar 0000000 0000000
code-7c8d3bd0deb6/share/roundup/templates/responsive/html/user.register.html 0000644 0000000 0000000 00000006103 13620351020 025507 0 ustar 0000000 0000000 Registering with <span i18n:name="tracker"
tal:replace="db/config/TRACKER_NAME" />Registering with
NOTE: If you have previously created or modified issue
reports using the sourceforge issue tracker previously used for python
bugs, your username on sourceforge already exists in this tracker. Use
the Password recovery form to
get a password for your account.