code-6e708cf528e1/roundup/scripts/.cvsignore0000644000000000000000000000002410016760046017042 0ustar 00000000000000*.pyc *.pyo *.cover code-6e708cf528e1/roundup/scripts/__init__.py0000644000000000000000000000217010016760046017157 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.2 2002-09-10 01:07:05 richard Exp $ __doc__ = ''' Subpackage containing the modules that implement the command line tools. Note that these are imported by script stubs generated by "setup.py". ''' # vim: set filetype=python ts=4 sw=4 et si code-6e708cf528e1/roundup/scripts/roundup_admin.py0000644000000000000000000000257310016760046020273 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_admin.py,v 1.5 2003-04-24 04:27:32 richard Exp $ # python version check from roundup import version_check # import the admin tool guts and make it go from roundup.admin import AdminTool from roundup.i18n import _ import sys def run(): # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) tool = AdminTool() sys.exit(tool.main()) if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si code-6e708cf528e1/roundup/scripts/roundup_mailgw.py0000644000000000000000000001241310016760046020455 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_mailgw.py,v 1.10 2003-04-24 04:27:32 richard Exp $ # python version check from roundup import version_check import sys, os, re, cStringIO, getopt from roundup.mailgw import Message from roundup.i18n import _ def usage(args, message=None): if message is not None: print message print _('Usage: %(program)s [[-C class] -S field=value]* [method]')%{'program': args[0]} print _(''' The roundup mail gateway may be called in one of three ways: . with an instance home as the only argument, . with both an instance home and a mail spool file, or . with both an instance home and a pop server account. It also supports optional -C and -S arguments that allows you to set a fields for a class created by the roundup-mailgw. The default class if not specified is msg, but the other classes: issue, file, user can also be used. The -S or --set options uses the same property=value[;property=value] notation accepted by the command line roundup command or the commands that can be given on the Subject line of an email message. It can let you set the type of the message on a per email address basis. PIPE: In the first case, the mail gateway reads a single message from the standard input and submits the message to the roundup.mailgw module. UNIX mailbox: In the second case, the gateway reads all messages from the mail spool file and submits each in turn to the roundup.mailgw module. The file is emptied once all messages have been successfully handled. The file is specified as: mailbox /path/to/mailbox POP: In the third case, the gateway reads all messages from the POP server specified and submits each in turn to the roundup.mailgw module. The server is specified as: pop username:password@server The username and password may be omitted: pop username@server pop server are both valid. The username and/or password will be prompted for if not supplied on the command-line. APOP: Same as POP, but using Authenticated POP: apop username:password@server ''') return 1 def main(argv): '''Handle the arguments to the program and initialise environment. ''' # take the argv array and parse it leaving the non-option # arguments in the args array. try: optionsList, args = getopt.getopt(argv[1:], 'C:S:', ['set=', 'class=']) except getopt.GetoptError: # print help information and exit: usage(argv) sys.exit(2) # figure the instance home if len(args) > 0: instance_home = args[0] else: instance_home = os.environ.get('ROUNDUP_INSTANCE', '') if not instance_home: return usage(argv) # get the instance import roundup.instance instance = roundup.instance.open(instance_home) # get a mail handler db = instance.open('admin') # now wrap in try/finally so we always close the database try: handler = instance.MailGW(instance, db, optionsList) # if there's no more arguments, read a single message from stdin if len(args) == 1: return handler.do_pipe() # otherwise, figure what sort of mail source to handle if len(args) < 3: return usage(argv, _('Error: not enough source specification information')) source, specification = args[1:] if source == 'mailbox': return handler.do_mailbox(specification) elif source == 'pop': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: return handler.do_pop(m.group('server'), m.group('user'), m.group('pass')) return usage(argv, _('Error: pop specification not valid')) elif source == 'apop': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: return handler.do_apop(m.group('server'), m.group('user'), m.group('pass')) return usage(argv, _('Error: apop specification not valid')) return usage(argv, _('Error: The source must be either "mailbox", "pop" or "apop"')) finally: db.close() def run(): # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) sys.exit(main(sys.argv)) # call main if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si code-6e708cf528e1/roundup/scripts/roundup_server.py0000644000000000000000000004377710016760046020524 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # """ HTTP Server that serves roundup. $Id: roundup_server.py,v 1.26.2.5 2004-02-15 22:22:20 richard Exp $ """ # python version check from roundup import version_check import sys, os, urllib, StringIO, traceback, cgi, binascii, getopt, imp import BaseHTTPServer, socket # Roundup modules of use here from roundup.cgi import cgitb, client import roundup.instance from roundup.i18n import _ # ## Configuration # # This indicates where the Roundup trackers live. They're given as NAME -> # TRACKER_HOME, where the NAME part is used in the URL to select the # appropriate reacker. # Make sure the NAME part doesn't include any url-unsafe characters like # spaces, as these confuse the cookie handling in browsers like IE. TRACKER_HOMES = { # 'example': '/path/to/example', } ROUNDUP_USER = None ROUNDUP_GROUP = None ROUNDUP_LOG_IP = 1 HOSTNAME = '' PORT = 8080 PIDFILE = None LOGFILE = None # ## end configuration # import zlib, base64 favico = zlib.decompress(base64.decodestring(''' eJyVUk2IQVEUfn4yaRYjibdQZiVba/ZE2djIUmHWFjaKGVmIlY2iFMVG2ViQhXqFSP6iFFJvw4uF LGdWd743mpeMn+a88917Oue7955z3qEoET6FQkHx8iahKDV2A8B7XgERRf/EKMSUzyf8ypbbnnQy mWBdr9eVSkVw3tJGoxGNRpvNZigUyufzWPv9Pvwcx0UiERj7/V4g73Y7j8fTarWMRmO73U4kEkKI YZhardbr9eLxuOD0+/2ZTMZisYjFYpqmU6kU799uN5tNMBg8HA7ZbPY8GaTh8/mEipRKpclk0ul0 NpvNarUmk0mWZS/yr9frcrmc+iMOh+NWydPp1Ov1SiSSc344HL7fKKfTiSN2u12tVqOcxWJxn6/V ag0GAwxkrlKp5vP5fT7ulMlk6XRar9dLpVIUXi6Xb5Hxa1wul0ajKZVKsVjM7XYXCoVOp3OVPJvN AoFAtVo1m825XO7hSODOYrH4kHbxxGAwwODBGI/H6DBs5LNara7yl8slGjIcDsHpdrunU6PRCAP2 r3fPdUcIYeyEfLSAJ0LeAUZHCAt8Al/8/kLIEWDB5YDj0wm8fAP6fVfo '''.strip())) class RoundupRequestHandler(BaseHTTPServer.BaseHTTPRequestHandler): TRACKER_HOMES = TRACKER_HOMES ROUNDUP_USER = ROUNDUP_USER def run_cgi(self): """ Execute the CGI command. Wrap an innner call in an error handler so all errors can be caught. """ save_stdin = sys.stdin sys.stdin = self.rfile try: self.inner_run_cgi() except client.NotFound: self.send_error(404, self.path) except client.Unauthorised: self.send_error(403, self.path) except: exc, val, tb = sys.exc_info() if hasattr(socket, 'timeout') and exc == socket.timeout: s = StringIO.StringIO() traceback.print_exc(None, s) self.log_message(str(s.getvalue())) else: # it'd be nice to be able to detect if these are going to have # any effect... self.send_response(400) self.send_header('Content-Type', 'text/html') self.end_headers() try: reload(cgitb) self.wfile.write(cgitb.breaker()) self.wfile.write(cgitb.html()) except: s = StringIO.StringIO() traceback.print_exc(None, s) self.wfile.write("
")
                    self.wfile.write(cgi.escape(s.getvalue()))
                    self.wfile.write("
\n") sys.stdin = save_stdin do_GET = do_POST = run_cgi def index(self): ''' Print up an index of the available trackers ''' self.send_response(200) self.send_header('Content-Type', 'text/html') self.end_headers() w = self.wfile.write w(_('Roundup trackers index\n')) w(_('

Roundup trackers index

    \n')) keys = self.TRACKER_HOMES.keys() keys.sort() for tracker in keys: w(_('
  1. %(tracker_name)s\n')%{ 'tracker_url': urllib.quote(tracker), 'tracker_name': cgi.escape(tracker)}) w(_('
')) def inner_run_cgi(self): ''' This is the inner part of the CGI handling ''' rest = self.path if rest == '/favicon.ico': raise client.NotFound # self.send_response(200) # self.send_header('Content-Type', 'image/x-ico') # self.end_headers() # self.wfile.write(favicon) # return i = rest.rfind('?') if i >= 0: rest, query = rest[:i], rest[i+1:] else: query = '' # no tracker - spit out the index if rest == '/': return self.index() # figure the tracker l_path = rest.split('/') tracker_name = urllib.unquote(l_path[1]) # handle missing trailing '/' if len(l_path) == 2: self.send_response(301) # redirect - XXX https?? protocol = 'http' url = '%s://%s%s/'%(protocol, self.headers['host'], self.path) self.send_header('Location', url) self.end_headers() self.wfile.write('Moved Permanently') return if self.TRACKER_HOMES.has_key(tracker_name): tracker_home = self.TRACKER_HOMES[tracker_name] tracker = roundup.instance.open(tracker_home) else: raise client.NotFound # figure out what the rest of the path is if len(l_path) > 2: rest = '/'.join(l_path[2:]) else: rest = '/' # Set up the CGI environment env = {} env['TRACKER_NAME'] = tracker_name env['REQUEST_METHOD'] = self.command env['PATH_INFO'] = urllib.unquote(rest) if query: env['QUERY_STRING'] = query host = self.address_string() if self.headers.typeheader is None: env['CONTENT_TYPE'] = self.headers.type else: env['CONTENT_TYPE'] = self.headers.typeheader length = self.headers.getheader('content-length') if length: env['CONTENT_LENGTH'] = length co = filter(None, self.headers.getheaders('cookie')) if co: env['HTTP_COOKIE'] = ', '.join(co) env['HTTP_AUTHORIZATION'] = self.headers.getheader('authorization') env['SCRIPT_NAME'] = '' env['SERVER_NAME'] = self.server.server_name env['SERVER_PORT'] = str(self.server.server_port) env['HTTP_HOST'] = self.headers['host'] decoded_query = query.replace('+', ' ') # do the roundup thang c = tracker.Client(tracker, self, env) c.main() LOG_IPADDRESS = ROUNDUP_LOG_IP def address_string(self): if self.LOG_IPADDRESS: return self.client_address[0] else: host, port = self.client_address return socket.getfqdn(host) def log_message(self, format, *args): ''' Try to *safely* log to stderr. ''' try: BaseHTTPServer.BaseHTTPRequestHandler.log_message(self, format, *args) except IOError: # stderr is no longer viable pass try: import win32serviceutil except: RoundupService = None else: # allow the win32 import win32service import win32event from win32event import * from win32file import * SvcShutdown = "ServiceShutdown" class RoundupService(win32serviceutil.ServiceFramework, BaseHTTPServer.HTTPServer): ''' A Roundup standalone server for Win32 by Ewout Prangsma ''' _svc_name_ = "Roundup Bug Tracker" _svc_display_name_ = "Roundup Bug Tracker" address = (HOSTNAME, PORT) def __init__(self, args): # redirect stdout/stderr to our logfile if LOGFILE: # appending, unbuffered sys.stdout = sys.stderr = open(LOGFILE, 'a', 0) win32serviceutil.ServiceFramework.__init__(self, args) BaseHTTPServer.HTTPServer.__init__(self, self.address, RoundupRequestHandler) # Create the necessary NT Event synchronization objects... # hevSvcStop is signaled when the SCM sends us a notification # to shutdown the service. self.hevSvcStop = win32event.CreateEvent(None, 0, 0, None) # hevConn is signaled when we have a new incomming connection. self.hevConn = win32event.CreateEvent(None, 0, 0, None) # Hang onto this module for other people to use for logging # purposes. import servicemanager self.servicemanager = servicemanager def SvcStop(self): # Before we do anything, tell the SCM we are starting the # stop process. self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING) win32event.SetEvent(self.hevSvcStop) def SvcDoRun(self): try: self.serve_forever() except SvcShutdown: pass def get_request(self): # Call WSAEventSelect to enable self.socket to be waited on. WSAEventSelect(self.socket, self.hevConn, FD_ACCEPT) while 1: try: rv = self.socket.accept() except socket.error, why: if why[0] != WSAEWOULDBLOCK: raise # Use WaitForMultipleObjects instead of select() because # on NT select() is only good for sockets, and not general # NT synchronization objects. rc = WaitForMultipleObjects((self.hevSvcStop, self.hevConn), 0, INFINITE) if rc == WAIT_OBJECT_0: # self.hevSvcStop was signaled, this means: # Stop the service! # So we throw the shutdown exception, which gets # caught by self.SvcDoRun raise SvcShutdown # Otherwise, rc == WAIT_OBJECT_0 + 1 which means # self.hevConn was signaled, which means when we call # self.socket.accept(), we'll have our incoming connection # socket! # Loop back to the top, and let that accept do its thing... else: # yay! we have a connection # However... the new socket is non-blocking, we need to # set it back into blocking mode. (The socket that accept() # returns has the same properties as the listening sockets, # this includes any properties set by WSAAsyncSelect, or # WSAEventSelect, and whether its a blocking socket or not.) # # So if you yank the following line, the setblocking() call # will be useless. The socket will still be in non-blocking # mode. WSAEventSelect(rv[0], self.hevConn, 0) rv[0].setblocking(1) break return rv def usage(message=''): if message: message = _('Error: %(error)s\n\n')%{'error': message} if RoundupService: win = ''' -c: Windows Service options. If you want to run the server as a Windows Service, you must configure the rest of the options by changing the constants of this program. You will at least configure one tracker in the TRACKER_HOMES variable. This option is mutually exclusive from the rest. Typing "roundup-server -c help" shows Windows Services specifics.''' else: win = '' print _('''%(message)sUsage: roundup-server [options] [name=tracker home]* options: -n: sets the host name -p: sets the port to listen on -l: sets a filename to log to (instead of stdout) -d: run the server in the background and on UN*X write the server's PID to the nominated file. The -l option *must* be specified if this option is. -N: log client machine names in access log instead of IP addresses (much slower) %(win)s name=tracker home: Sets the tracker home(s) to use. The name is how the tracker is identified in the URL (it's the first part of the URL path). The tracker home is the directory that was identified when you did "roundup-admin init". You may specify any number of these name=home pairs on the command-line. For convenience, you may edit the TRACKER_HOMES variable in the roundup-server file instead. Make sure the name part doesn't include any url-unsafe characters like spaces, as these confuse the cookie handling in browsers like IE. ''')%locals() sys.exit(0) def daemonize(pidfile): ''' Turn this process into a daemon. - make sure the sys.std(in|out|err) are completely cut off - make our parent PID 1 Write our new PID to the pidfile. From A.M. Kuuchling (possibly originally Greg Ward) with modification from Oren Tirosh, and finally a small mod from me. ''' # Fork once if os.fork() != 0: os._exit(0) # Create new session os.setsid() # Second fork to force PPID=1 pid = os.fork() if pid: pidfile = open(pidfile, 'w') pidfile.write(str(pid)) pidfile.close() os._exit(0) os.chdir("/") os.umask(0) # close off sys.std(in|out|err), redirect to devnull so the file # descriptors can't be used again devnull = os.open('/dev/null', 0) os.dup2(devnull, 0) os.dup2(devnull, 1) os.dup2(devnull, 2) def abspath(path): ''' Make the given path an absolute path. Code from Zope-Coders posting of 2002-10-06 by GvR. ''' if not os.path.isabs(path): path = os.path.join(os.getcwd(), path) return os.path.normpath(path) def run(): ''' Script entry point - handle args and figure out what to to. ''' # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) hostname = HOSTNAME port = PORT pidfile = PIDFILE logfile = LOGFILE user = ROUNDUP_USER group = ROUNDUP_GROUP svc_args = None try: # handle the command-line args options = 'n:p:u:d:l:hN' if RoundupService: options += 'c' try: optlist, args = getopt.getopt(sys.argv[1:], options) except getopt.GetoptError, e: usage(str(e)) user = ROUNDUP_USER group = None for (opt, arg) in optlist: if opt == '-n': hostname = arg elif opt == '-p': port = int(arg) elif opt == '-u': user = arg elif opt == '-d': pidfile = abspath(arg) elif opt == '-l': logfile = abspath(arg) elif opt == '-h': usage() elif opt == '-N': RoundupRequestHandler.LOG_IPADDRESS = 0 elif opt == '-c': svc_args = [opt] + args; args = None if svc_args is not None and len(optlist) > 1: raise ValueError, _("windows service option must be the only one") if pidfile and not logfile: raise ValueError, _("logfile *must* be specified if pidfile is") if hasattr(os, 'getuid'): # if root, setuid to the running user if not os.getuid() and user is not None: try: import pwd except ImportError: raise ValueError, _("Can't change users - no pwd module") try: uid = pwd.getpwnam(user)[2] except KeyError: raise ValueError, _("User %(user)s doesn't exist")%locals() os.setuid(uid) elif os.getuid() and user is not None: print _('WARNING: ignoring "-u" argument, not root') # People can remove this check if they're really determined if not os.getuid() and user is None: raise ValueError, _("Can't run as root!") # handle tracker specs if args: d = {} for arg in args: try: name, home = arg.split('=') except ValueError: raise ValueError, _("Instances must be name=home") d[name] = home RoundupRequestHandler.TRACKER_HOMES = d except SystemExit: raise except: exc_type, exc_value = sys.exc_info()[:2] usage('%s: %s'%(exc_type, exc_value)) # we don't want the cgi module interpreting the command-line args ;) sys.argv = sys.argv[:1] address = (hostname, port) # fork? if pidfile: if not hasattr(os, 'fork'): print "Sorry, you can't run the server as a daemon on this" \ 'Operating System' sys.exit(0) else: daemonize(pidfile) if svc_args is not None: # don't do any other stuff return win32serviceutil.HandleCommandLine(RoundupService, argv=svc_args) # redirect stdout/stderr to our logfile if logfile: # appending, unbuffered sys.stdout = sys.stderr = open(logfile, 'a', 0) httpd = BaseHTTPServer.HTTPServer(address, RoundupRequestHandler) print _('Roundup server started on %(address)s')%locals() try: httpd.serve_forever() except KeyboardInterrupt: print 'Keyboard Interrupt: exiting' if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si