code-4e0944649af7/roundup/cgi/ZTUtils/Batch.py0000644000000000000000000001044215115720235017017 0ustar 00000000000000############################################################################## # # Copyright (c) 2001 Zope Corporation and Contributors. All Rights Reserved. # # This software is subject to the provisions of the Zope Public License, # Version 2.0 (ZPL). A copy of the ZPL should accompany this distribution. # THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED # WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS # FOR A PARTICULAR PURPOSE # ############################################################################## __doc__='''Batch class, for iterating over a sequence in batches ''' __docformat__ = 'restructuredtext' class LazyPrevBatch: def __of__(self, parent): return Batch(parent._sequence, parent.size, parent.first - parent._size + parent.overlap, 0, parent.orphan, parent.overlap) class LazyNextBatch: def __of__(self, parent): try: parent._sequence[parent.end] except IndexError: return None return Batch(parent._sequence, parent.size, parent.end - parent.overlap, 0, parent.orphan, parent.overlap) class LazySequenceLength: def __of__(self, parent): parent.sequence_length = l = len(parent._sequence) return l class Batch: """Create a sequence batch""" __allow_access_to_unprotected_subobjects__ = 1 previous = LazyPrevBatch() next = LazyNextBatch() sequence_length = LazySequenceLength() def __init__(self, sequence, size, start=0, end=0, orphan=0, overlap=0): '''Encapsulate "sequence" in batches of "size". Arguments: "start" and "end" are 0-based indexes into the sequence. If the next batch would contain no more than "orphan" elements, it is combined with the current batch. "overlap" is the number of elements shared by adjacent batches. If "size" is not specified, it is computed from "start" and "end". If "size" is 0, it is the length of the sequence. Failing that, it is 7. Attributes: Note that the "start" attribute, unlike the argument, is a 1-based index (I know, lame). "first" is the 0-based index. "length" is the actual number of elements in the batch. "sequence_length" is the length of the original, unbatched, sequence Note: "_size" is the "actual" size used to perform batch calulcations, while "size" is the "representative" size. (ie. a "special value" of "size" used by the templates may translate to a different value for "_size" which is used internally for batch calculations). ''' start = start + 1 start,end,sz = opt(start,end,size,orphan,sequence) self._sequence = sequence self.size = size self._size = sz self.start = start self.end = end self.orphan = orphan self.overlap = overlap self.first = max(start - 1, 0) self.length = self.end - self.first if self.first == 0: self.previous = None def __getitem__(self, index): if index < 0: if index + self.end < self.first: raise IndexError(index) return self._sequence[index + self.end] if index >= self.length: raise IndexError(index) return self._sequence[index + self.first] def __len__(self): return self.length def opt(start,end,size,orphan,sequence): if size < 1: if size == 0: size=len(sequence) elif start > 0 and end > 0 and end >= start: size=end+1-start else: size=7 if start > 0: try: sequence[start-1] except IndexError: start=len(sequence) if end > 0: if end < start: end=start else: end=start+size-1 try: sequence[end+orphan-1] except IndexError: end=len(sequence) elif end > 0: try: sequence[end-1] except IndexError: end=len(sequence) start=end+1-size if start - 1 < orphan: start=1 else: start=1 end=start+size-1 try: sequence[end+orphan-1] except IndexError: end=len(sequence) return start,end,size code-4e0944649af7/roundup/cgi/ZTUtils/Iterator.py0000644000000000000000000001415015115720235017567 0ustar 00000000000000############################################################################## # # Copyright (c) 2001 Zope Corporation and Contributors. All Rights Reserved. # # This software is subject to the provisions of the Zope Public License, # Version 2.0 (ZPL). A copy of the ZPL should accompany this distribution. # THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED # WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS # FOR A PARTICULAR PURPOSE # ############################################################################## __doc__='''Iterator class Unlike the builtin iterators of Python 2.2+, these classes are designed to maintain information about the state of an iteration. The Iterator() function accepts either a sequence or a Python iterator. The next() method fetches the next item, and returns true if it succeeds. ''' __docformat__ = 'restructuredtext' import string class Iterator: '''Simple Iterator class''' __allow_access_to_unprotected_subobjects__ = 1 nextIndex = 0 def __init__(self, seq): self.seq = iter(seq) # force seq to be an iterator self._inner = iterInner self._prep_next = iterInner.prep_next def __getattr__(self, name): try: inner = getattr(self._inner, 'it_' + name) except AttributeError: raise AttributeError(name) return inner(self) def next(self): if not (hasattr(self, '_next') or self._prep_next(self)): return 0 self.index = i = self.nextIndex self.nextIndex = i+1 self._advance(self) return 1 def _advance(self, it): self.item = self._next del self._next del self.end self._advance = self._inner.advance self.start = 1 def number(self): return self.nextIndex def even(self): return not self.index % 2 def odd(self): return self.index % 2 def letter(self, base=ord('a'), radix=26): index = self.index s = '' while 1: index, off = divmod(index, radix) s = chr(base + off) + s if not index: return s def Letter(self): return self.letter(base=ord('A')) def Roman(self, rnvalues=( (1000,'M'),(900,'CM'),(500,'D'),(400,'CD'), (100,'C'),(90,'XC'),(50,'L'),(40,'XL'), (10,'X'),(9,'IX'),(5,'V'),(4,'IV'),(1,'I')) ): n = self.index + 1 s = '' for v, r in rnvalues: rct, n = divmod(n, v) s = s + r * rct return s def roman(self, lower=lambda x:x.lower): return self.Roman().lower() def first(self, name=None): if self.start: return 1 return self.same_part(name, self._last, self.item) def last(self, name=None): if self.end: return 1 return self.same_part(name, self.item, self._next) def same_part(self, name, ob1, ob2): """I have no idea what this does. It returns True for first()/last() when there are more items in the sequence. Called by first() to compare the previous item in sequence and the current item. Caled by last() to compare the current item and next item in sequence. Accepts a string version of the name of an attribute as 'name'. If no attribute name is provided, return True if the two items: are equal (==) - duplicate strings/integer/same object else False. If a non-existent attribute name is provided return False. If the attribute is present and the named attributes compare equal (==) return True else False. No idea what use case this handles. Maybe this has something to do with batching and first/last returning True triggers a new group? """ if name is None: return ob1 == ob2 no = [] return getattr(ob1, name, no) == getattr(ob2, name, no) is not no def __iter__(self): return IterIter(self) class InnerBase: '''Base Inner class for Iterators''' # Prep sets up ._next and .end def prep_next(self, it): it.next = self.no_next it.end = 1 return 0 # Advance knocks them down def advance(self, it): it._last = it.item it.item = it._next del it._next del it.end it.start = 0 def no_next(self, it): return 0 def it_end(self, it): if hasattr(it, '_next'): return 0 return not self.prep_next(it) class SeqInner(InnerBase): '''Inner class for sequence Iterators''' def _supports(self, ob): try: ob[0] except (TypeError, AttributeError): return 0 except: pass return 1 def prep_next(self, it): i = it.nextIndex try: it._next = it.seq[i] except IndexError: it._prep_next = self.no_next it.end = 1 return 0 it.end = 0 return 1 def it_length(self, it): it.length = l = len(it.seq) return l try: StopIteration=StopIteration except NameError: StopIteration="StopIteration" class IterInner(InnerBase): '''Iterator inner class for Python iterators''' def _supports(self, ob): try: if hasattr(ob, 'next') and (ob is iter(ob)): return 1 except: return 0 def prep_next(self, it): try: it._next = next(it.seq) except StopIteration: it._prep_next = self.no_next it.end = 1 return 0 it.end = 0 return 1 class IterIter: def __init__(self, it): self.it = it self.skip = it.nextIndex > 0 and not it.end def __next__(self): it = self.it if self.skip: self.skip = 0 return it.item if it.next(): return it.item raise StopIteration # Python 2 compatibility: next = __next__ seqInner = SeqInner() iterInner = IterInner() code-4e0944649af7/roundup/cgi/ZTUtils/__init__.py0000644000000000000000000000152615115720235017540 0ustar 00000000000000############################################################################## # # Copyright (c) 2001 Zope Corporation and Contributors. All Rights Reserved. # # This software is subject to the provisions of the Zope Public License, # Version 2.0 (ZPL). A copy of the ZPL should accompany this distribution. # THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED # WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED # WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS # FOR A PARTICULAR PURPOSE # ############################################################################## __doc__='''Package of template utility classes and functions. Modified for Roundup 0.5 release: - removed Zope imports ''' __docformat__ = 'restructuredtext' from .Batch import Batch from .Iterator import Iterator