code-3dcdc5fef2e4/roundup/scripts/.cvsignore0000644000000000000000000000002410071744475017345 0ustar 00000000000000*.pyc *.pyo *.cover code-3dcdc5fef2e4/roundup/scripts/__init__.py0000644000000000000000000000222110071744475017457 0ustar 00000000000000# # Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: __init__.py,v 1.3 2004-02-11 23:55:10 richard Exp $ '''Subpackage containing the modules that implement the command line tools. Note that these are imported by script stubs generated by "setup.py". ''' __docformat__ = 'restructuredtext' # vim: set filetype=python ts=4 sw=4 et si code-3dcdc5fef2e4/roundup/scripts/roundup_admin.py0000644000000000000000000000274710071744475020601 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_admin.py,v 1.6 2004-02-11 23:55:10 richard Exp $ """Command-line script stub that calls the roundup.admin functions. """ __docformat__ = 'restructuredtext' # python version check from roundup import version_check # import the admin tool guts and make it go from roundup.admin import AdminTool from roundup.i18n import _ import sys def run(): # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) tool = AdminTool() sys.exit(tool.main()) if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si code-3dcdc5fef2e4/roundup/scripts/roundup_mailgw.py0000644000000000000000000001526510071744475020770 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # # $Id: roundup_mailgw.py,v 1.18 2004-05-28 00:56:50 richard Exp $ """Command-line script stub that calls the roundup.mailgw. """ __docformat__ = 'restructuredtext' # python version check from roundup import version_check from roundup import __version__ as roundup_version import sys, os, re, cStringIO, getopt from roundup.mailgw import Message from roundup.i18n import _ def usage(args, message=None): if message is not None: print message print _( """Usage: %(program)s [-v] [[-C class] -S field=value]* [method] Options: -v: print version and exit -C / -S: see below The roundup mail gateway may be called in one of four ways: . with an instance home as the only argument, . with both an instance home and a mail spool file, . with both an instance home and a POP/APOP server account, or . with both an instance home and a IMAP/IMAPS server account. It also supports optional -C and -S arguments that allows you to set a fields for a class created by the roundup-mailgw. The default class if not specified is msg, but the other classes: issue, file, user can also be used. The -S or --set options uses the same property=value[;property=value] notation accepted by the command line roundup command or the commands that can be given on the Subject line of an email message. It can let you set the type of the message on a per email address basis. PIPE: In the first case, the mail gateway reads a single message from the standard input and submits the message to the roundup.mailgw module. UNIX mailbox: In the second case, the gateway reads all messages from the mail spool file and submits each in turn to the roundup.mailgw module. The file is emptied once all messages have been successfully handled. The file is specified as: mailbox /path/to/mailbox POP: In the third case, the gateway reads all messages from the POP server specified and submits each in turn to the roundup.mailgw module. The server is specified as: pop username:password@server The username and password may be omitted: pop username@server pop server are both valid. The username and/or password will be prompted for if not supplied on the command-line. APOP: Same as POP, but using Authenticated POP: apop username:password@server IMAP: Connect to an IMAP server. This supports the same notation as that of POP mail. imap username:password@server It also allows you to specify a specific mailbox other than INBOX using this format: imap username:password@server mailbox IMAPS: Connect to an IMAP server over ssl. This supports the same notation as IMAP. imaps username:password@server [mailbox] """)%{'program': args[0]} return 1 def main(argv): '''Handle the arguments to the program and initialise environment. ''' # take the argv array and parse it leaving the non-option # arguments in the args array. try: optionsList, args = getopt.getopt(argv[1:], 'vC:S:', ['set=', 'class=']) except getopt.GetoptError: # print help information and exit: usage(argv) sys.exit(2) for (opt, arg) in optionsList: if opt == '-v': print '%s (python %s)'%(roundup_version, sys.version.split()[0]) return # figure the instance home if len(args) > 0: instance_home = args[0] else: instance_home = os.environ.get('ROUNDUP_INSTANCE', '') if not (instance_home and os.path.isdir(instance_home)): return usage(argv) # get the instance import roundup.instance instance = roundup.instance.open(instance_home) # get a mail handler db = instance.open('admin') # now wrap in try/finally so we always close the database try: handler = instance.MailGW(instance, db, optionsList) # if there's no more arguments, read a single message from stdin if len(args) == 1: return handler.do_pipe() # otherwise, figure what sort of mail source to handle if len(args) < 3: return usage(argv, _('Error: not enough source specification information')) source, specification = args[1:3] if source == 'mailbox': return handler.do_mailbox(specification) elif source == 'pop': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: return handler.do_pop(m.group('server'), m.group('user'), m.group('pass')) return usage(argv, _('Error: pop specification not valid')) elif source == 'apop': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: return handler.do_apop(m.group('server'), m.group('user'), m.group('pass')) return usage(argv, _('Error: apop specification not valid')) elif source == 'imap' or source == 'imaps': m = re.match(r'((?P[^:]+)(:(?P.+))?@)?(?P.+)', specification) if m: ssl = 0 if source == 'imaps': ssl = 1 mailbox = '' if len(args) > 3: mailbox = args[3] return handler.do_imap(m.group('server'), m.group('user'), m.group('pass'), mailbox, ssl) return usage(argv, _('Error: The source must be either "mailbox",' ' "pop", "apop", "imap" or "imaps"')) finally: # handler might have closed the initial db and opened a new one handler.db.close() def run(): # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) sys.exit(main(sys.argv)) # call main if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si code-3dcdc5fef2e4/roundup/scripts/roundup_server.py0000644000000000000000000005017110071744475021011 0ustar 00000000000000# Copyright (c) 2001 Bizar Software Pty Ltd (http://www.bizarsoftware.com.au/) # This module is free software, and you may redistribute it and/or modify # under the same terms as Python, so long as this copyright message and # disclaimer are retained in their original form. # # IN NO EVENT SHALL BIZAR SOFTWARE PTY LTD BE LIABLE TO ANY PARTY FOR # DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING # OUT OF THE USE OF THIS CODE, EVEN IF THE AUTHOR HAS BEEN ADVISED OF THE # POSSIBILITY OF SUCH DAMAGE. # # BIZAR SOFTWARE PTY LTD SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, # BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS # FOR A PARTICULAR PURPOSE. THE CODE PROVIDED HEREUNDER IS ON AN "AS IS" # BASIS, AND THERE IS NO OBLIGATION WHATSOEVER TO PROVIDE MAINTENANCE, # SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. # """Command-line script that runs a server over roundup.cgi.client. $Id: roundup_server.py,v 1.53 2004-07-02 08:52:00 a1s Exp $ """ __docformat__ = 'restructuredtext' # python version check from roundup import version_check from roundup import __version__ as roundup_version import sys, os, urllib, StringIO, traceback, cgi, binascii, getopt, imp import SocketServer, BaseHTTPServer, socket, errno # Roundup modules of use here from roundup.cgi import cgitb, client import roundup.instance from roundup.i18n import _ try: import signal except: signal = None # ## Configuration # # This indicates where the Roundup trackers live. They're given as NAME -> # TRACKER_HOME, where the NAME part is used in the URL to select the # appropriate reacker. # Make sure the NAME part doesn't include any url-unsafe characters like # spaces, as these confuse the cookie handling in browsers like IE. TRACKER_HOMES = { # 'example': '/path/to/example', } ROUNDUP_USER = None ROUNDUP_GROUP = None ROUNDUP_LOG_IP = 1 HOSTNAME = '' PORT = 8080 PIDFILE = None LOGFILE = None # ## end configuration # # "default" favicon.ico # generate by using "icotool" and tools/base64 import zlib, base64 favico = zlib.decompress(base64.decodestring(''' eJztjr1PmlEUh59XgVoshdYPWorFIhaRFq0t9pNq37b60lYSTRzcTFw6GAfj5gDYaF0dTB0MxMSE gQQd3FzKJiEC0UCIUUN1M41pV2JCXySg/0ITn5tfzvmdc+85FwT56HSc81UJjXJsk1UsNcsSqCk1 BS64lK+vr7OyssLJyQl2ux2j0cjU1BQajYZIJEIwGMRms+H3+zEYDExOTjI2Nsbm5iZWqxWv18vW 1hZDQ0Ok02kmJiY4Ojpienqa3d1dxsfHUSqVeDwe5ufnyeVyrK6u4nK5ODs7Y3FxEYfDwdzcHCaT icPDQ5LJJIIgMDIyQj6fZ39/n+3tbdbW1pAkiYWFBWZmZtjb2yMejzM8PEwgEMDn85HNZonFYqjV asLhMMvLy2QyGfR6PaOjowwODmKxWDg+PkalUhEKhSgUCiwtLWE2m9nZ2UGhULCxscHp6SmpVIpo NMrs7CwHBwdotVoSiQRXXPG/IzY7RHtt922xjFRb01H1XhKfPBNbi/7my7rrLXJ88eppvxwEfV3f NY3Y6exofVdsV3+2wnPFDdPjB83n7xuVpcFvygPbGwxF31LZIKrQDfR2Xvh7lmrX654L/7bvlnng bn3Zuj8M9Hepux6VfZtW1yA6K7cfGqVu8TL325u+fHTb71QKbk+7TZQ+lTc6RcnpqW8qmVQBoj/g 23eo0sr/NIGvB37K+lOWXMvJ+uWFeKGU/03Cb7n3D4M3wxI= '''.strip())) class RoundupRequestHandler(BaseHTTPServer.BaseHTTPRequestHandler): TRACKER_HOMES = TRACKER_HOMES ROUNDUP_USER = ROUNDUP_USER def run_cgi(self): """ Execute the CGI command. Wrap an innner call in an error handler so all errors can be caught. """ save_stdin = sys.stdin sys.stdin = self.rfile try: self.inner_run_cgi() except client.NotFound: self.send_error(404, self.path) except client.Unauthorised, message: self.send_error(403, '%s (%s)'%(self.path, message)) except: exc, val, tb = sys.exc_info() if hasattr(socket, 'timeout') and isinstance(val, socket.timeout): self.log_error('timeout') else: # it'd be nice to be able to detect if these are going to have # any effect... self.send_response(400) self.send_header('Content-Type', 'text/html') self.end_headers() try: reload(cgitb) self.wfile.write(cgitb.breaker()) self.wfile.write(cgitb.html()) except: s = StringIO.StringIO() traceback.print_exc(None, s) self.wfile.write("
")
                    self.wfile.write(cgi.escape(s.getvalue()))
                    self.wfile.write("
\n") sys.stdin = save_stdin do_GET = do_POST = run_cgi def index(self): ''' Print up an index of the available trackers ''' self.send_response(200) self.send_header('Content-Type', 'text/html') self.end_headers() w = self.wfile.write w(_('Roundup trackers index\n' '

Roundup trackers index

    \n')) keys = self.TRACKER_HOMES.keys() keys.sort() for tracker in keys: w(_('
  1. %(tracker_name)s\n')%{ 'tracker_url': urllib.quote(tracker), 'tracker_name': cgi.escape(tracker)}) w(_('
')) def inner_run_cgi(self): ''' This is the inner part of the CGI handling ''' rest = self.path if rest == '/favicon.ico': self.send_response(200) self.send_header('Content-Type', 'image/x-icon') self.end_headers() self.wfile.write(favico) return i = rest.rfind('?') if i >= 0: rest, query = rest[:i], rest[i+1:] else: query = '' # no tracker - spit out the index if rest == '/': return self.index() # figure the tracker l_path = rest.split('/') tracker_name = urllib.unquote(l_path[1]) # handle missing trailing '/' if len(l_path) == 2: self.send_response(301) # redirect - XXX https?? protocol = 'http' url = '%s://%s%s/'%(protocol, self.headers['host'], self.path) self.send_header('Location', url) self.end_headers() self.wfile.write('Moved Permanently') return if self.TRACKER_HOMES.has_key(tracker_name): tracker_home = self.TRACKER_HOMES[tracker_name] tracker = roundup.instance.open(tracker_home) else: raise client.NotFound # figure out what the rest of the path is if len(l_path) > 2: rest = '/'.join(l_path[2:]) else: rest = '/' # Set up the CGI environment env = {} env['TRACKER_NAME'] = tracker_name env['REQUEST_METHOD'] = self.command env['PATH_INFO'] = urllib.unquote(rest) if query: env['QUERY_STRING'] = query host = self.address_string() if self.headers.typeheader is None: env['CONTENT_TYPE'] = self.headers.type else: env['CONTENT_TYPE'] = self.headers.typeheader length = self.headers.getheader('content-length') if length: env['CONTENT_LENGTH'] = length co = filter(None, self.headers.getheaders('cookie')) if co: env['HTTP_COOKIE'] = ', '.join(co) env['HTTP_AUTHORIZATION'] = self.headers.getheader('authorization') env['SCRIPT_NAME'] = '' env['SERVER_NAME'] = self.server.server_name env['SERVER_PORT'] = str(self.server.server_port) env['HTTP_HOST'] = self.headers['host'] decoded_query = query.replace('+', ' ') # do the roundup thang c = tracker.Client(tracker, self, env) c.main() LOG_IPADDRESS = ROUNDUP_LOG_IP def address_string(self): if self.LOG_IPADDRESS: return self.client_address[0] else: host, port = self.client_address return socket.getfqdn(host) def log_message(self, format, *args): ''' Try to *safely* log to stderr. ''' try: BaseHTTPServer.BaseHTTPRequestHandler.log_message(self, format, *args) except IOError: # stderr is no longer viable pass def error(): exc_type, exc_value = sys.exc_info()[:2] return _('Error: %s: %s' % (exc_type, exc_value)) # See whether we can use the forking server if hasattr(os, 'fork'): class server_class(SocketServer.ForkingMixIn, BaseHTTPServer.HTTPServer): pass else: server_class = BaseHTTPServer.HTTPServer try: import win32serviceutil except: RoundupService = None else: # allow the win32 import win32service import win32event from win32event import * from win32file import * SvcShutdown = "ServiceShutdown" class RoundupService(win32serviceutil.ServiceFramework, BaseHTTPServer.HTTPServer): ''' A Roundup standalone server for Win32 by Ewout Prangsma ''' _svc_name_ = "Roundup Bug Tracker" _svc_display_name_ = "Roundup Bug Tracker" address = (HOSTNAME, PORT) def __init__(self, args): # redirect stdout/stderr to our logfile if LOGFILE: # appending, unbuffered sys.stdout = sys.stderr = open(LOGFILE, 'a', 0) win32serviceutil.ServiceFramework.__init__(self, args) BaseHTTPServer.HTTPServer.__init__(self, self.address, RoundupRequestHandler) # Create the necessary NT Event synchronization objects... # hevSvcStop is signaled when the SCM sends us a notification # to shutdown the service. self.hevSvcStop = win32event.CreateEvent(None, 0, 0, None) # hevConn is signaled when we have a new incomming connection. self.hevConn = win32event.CreateEvent(None, 0, 0, None) # Hang onto this module for other people to use for logging # purposes. import servicemanager self.servicemanager = servicemanager def SvcStop(self): # Before we do anything, tell the SCM we are starting the # stop process. self.ReportServiceStatus(win32service.SERVICE_STOP_PENDING) win32event.SetEvent(self.hevSvcStop) def SvcDoRun(self): try: self.serve_forever() except SvcShutdown: pass def get_request(self): # Call WSAEventSelect to enable self.socket to be waited on. WSAEventSelect(self.socket, self.hevConn, FD_ACCEPT) while 1: try: rv = self.socket.accept() except socket.error, why: if why[0] != WSAEWOULDBLOCK: raise # Use WaitForMultipleObjects instead of select() because # on NT select() is only good for sockets, and not general # NT synchronization objects. rc = WaitForMultipleObjects((self.hevSvcStop, self.hevConn), 0, INFINITE) if rc == WAIT_OBJECT_0: # self.hevSvcStop was signaled, this means: # Stop the service! # So we throw the shutdown exception, which gets # caught by self.SvcDoRun raise SvcShutdown # Otherwise, rc == WAIT_OBJECT_0 + 1 which means # self.hevConn was signaled, which means when we call # self.socket.accept(), we'll have our incoming connection # socket! # Loop back to the top, and let that accept do its thing... else: # yay! we have a connection # However... the new socket is non-blocking, we need to # set it back into blocking mode. (The socket that accept() # returns has the same properties as the listening sockets, # this includes any properties set by WSAAsyncSelect, or # WSAEventSelect, and whether its a blocking socket or not.) # # So if you yank the following line, the setblocking() call # will be useless. The socket will still be in non-blocking # mode. WSAEventSelect(rv[0], self.hevConn, 0) rv[0].setblocking(1) break return rv def usage(message=''): if RoundupService: os_part = \ ""''' -c Windows Service options. If you want to run the server as a Windows Service, you must configure the rest of the options by changing the constants of this program. You will at least configure one tracker in the TRACKER_HOMES variable. This option is mutually exclusive from the rest. Typing "roundup-server -c help" shows Windows Services specifics.''' else: os_part = ""''' -u runs the Roundup web server as this UID -g runs the Roundup web server as this GID -d run the server in the background and write the server's PID to the file indicated by PIDfile. The -l option *must* be specified if -d is used.''' port=PORT if message: message += '\n' print _('''%(message)sUsage: roundup-server [options] [name=tracker home]* Options: -v prints the Roundup version number and exits -n sets the host name of the Roundup web server instance -p sets the port to listen on (default: %(port)s) -l log to the file indicated by fname instead of stderr/stdout -N log client machine names instead of IP addresses (much slower) %(os_part)s Examples: roundup-server support=/var/spool/roundup-trackers/support roundup-server -d /var/run/roundup.pid -l /var/log/roundup.log \\ support=/var/spool/roundup-trackers/support How to use "name=tracker home": These arguments set the tracker home(s) to use. The name is how the tracker is identified in the URL (it's the first part of the URL path). The tracker home is the directory that was identified when you did "roundup-admin init". You may specify any number of these name=home pairs on the command-line. For convenience, you may edit the TRACKER_HOMES variable in the roundup-server file instead. Make sure the name part doesn't include any url-unsafe characters like spaces, as these confuse the cookie handling in browsers like IE. ''')%locals() sys.exit(0) def daemonize(pidfile): ''' Turn this process into a daemon. - make sure the sys.std(in|out|err) are completely cut off - make our parent PID 1 Write our new PID to the pidfile. From A.M. Kuuchling (possibly originally Greg Ward) with modification from Oren Tirosh, and finally a small mod from me. ''' # Fork once if os.fork() != 0: os._exit(0) # Create new session os.setsid() # Second fork to force PPID=1 pid = os.fork() if pid: pidfile = open(pidfile, 'w') pidfile.write(str(pid)) pidfile.close() os._exit(0) os.chdir("/") os.umask(0) # close off sys.std(in|out|err), redirect to devnull so the file # descriptors can't be used again devnull = os.open('/dev/null', 0) os.dup2(devnull, 0) os.dup2(devnull, 1) os.dup2(devnull, 2) def run(port=PORT, success_message=None): ''' Script entry point - handle args and figure out what to to. ''' # time out after a minute if we can import socket if hasattr(socket, 'setdefaulttimeout'): socket.setdefaulttimeout(60) hostname = HOSTNAME pidfile = PIDFILE logfile = LOGFILE user = ROUNDUP_USER group = ROUNDUP_GROUP svc_args = None try: # handle the command-line args options = 'n:p:g:u:d:l:hNv' if RoundupService: options += 'c' try: optlist, args = getopt.getopt(sys.argv[1:], options) except getopt.GetoptError, e: usage(str(e)) user = ROUNDUP_USER group = None for (opt, arg) in optlist: if opt == '-n': hostname = arg elif opt == '-v': print '%s (python %s)'%(roundup_version, sys.version.split()[0]) return elif opt == '-p': port = int(arg) elif opt == '-u': user = arg elif opt == '-g': group = arg elif opt == '-d': pidfile = os.path.abspath(arg) elif opt == '-l': logfile = os.path.abspath(arg) elif opt == '-h': usage() elif opt == '-N': RoundupRequestHandler.LOG_IPADDRESS = 0 elif opt == '-c': svc_args = [opt] + args; args = None if svc_args is not None and len(optlist) > 1: raise ValueError, _("windows service option must be the only one") if pidfile and not logfile: raise ValueError, _("logfile *must* be specified if pidfile is") # obtain server before changing user id - allows to use port < # 1024 if started as root address = (hostname, port) try: httpd = server_class(address, RoundupRequestHandler) except socket.error, e: if e[0] == errno.EADDRINUSE: raise socket.error, \ _("Unable to bind to port %s, port already in use." % port) raise if group is not None and hasattr(os, 'getuid'): # if root, setgid to the running user if not os.getuid(): try: import grp except ImportError: raise ValueError, _("Can't change groups - no grp module") try: gid = grp.getgrnam(group)[2] except KeyError: raise ValueError,_("Group %(group)s doesn't exist")%locals() os.setgid(gid) elif os.getuid(): print _('WARNING: ignoring "-g" argument, not root') if hasattr(os, 'getuid'): # if root, setuid to the running user if not os.getuid() and user is not None: try: import pwd except ImportError: raise ValueError, _("Can't change users - no pwd module") try: uid = pwd.getpwnam(user)[2] except KeyError: raise ValueError, _("User %(user)s doesn't exist")%locals() os.setuid(uid) elif os.getuid() and user is not None: print _('WARNING: ignoring "-u" argument, not root') # People can remove this check if they're really determined if not os.getuid() and user is None: raise ValueError, _("Can't run as root!") # handle tracker specs if args: d = {} for arg in args: try: name, home = arg.split('=') except ValueError: raise ValueError, _("Instances must be name=home") d[name] = os.path.abspath(home) RoundupRequestHandler.TRACKER_HOMES = d except SystemExit: raise except ValueError: usage(error()) except: print error() sys.exit(1) # we don't want the cgi module interpreting the command-line args ;) sys.argv = sys.argv[:1] if pidfile: if not hasattr(os, 'fork'): print _("Sorry, you can't run the server as a daemon" " on this Operating System") sys.exit(0) else: daemonize(pidfile) if svc_args is not None: # don't do any other stuff return win32serviceutil.HandleCommandLine(RoundupService, argv=svc_args) # redirect stdout/stderr to our logfile if logfile: # appending, unbuffered sys.stdout = sys.stderr = open(logfile, 'a', 0) if success_message: print success_message else: print _('Roundup server started on %(address)s')%locals() try: httpd.serve_forever() except KeyboardInterrupt: print 'Keyboard Interrupt: exiting' if __name__ == '__main__': run() # vim: set filetype=python ts=4 sw=4 et si